Sunroof Glass Storage Weatherstrips - Under Hood
p/n: 70-5211-45
A pair of custom Sunroof Glass Storage Weatherstrips to protect the sunroof glass when it’s removed and stored under the hood. These weatherstrips mount to the hood with Peel-N-Stick adhesive backing.
Radiator Side Air Deflectors
p/n: 70-5246-31
This Radiator Side Air Deflector pair is designed from the original part for superior fitment and function. These left and right deflectors fit to the sides of the radiator.
Quarter Window Outer Weatherstrip - LH or RH
p/n: 70-5329-77
This Quarter Window Outer Weatherstrip is designed from the original part for superior fitment and seal. This LH or RH molded weatherstrip seal fits in between the quarter glass frame and the body.
Taillight and Housing Gaskets
p/n: 70-5293-15
A Taillight and Housing Gasket set designed from the original part for superior fitment and seal. This four (4) piece reproduction gasket set fits between the Taillight Lens and the Taillight Housing or Bezel to body.
Windshield Molding w/o Rain Channel
p/n: 70-5266-52
This reproduction Windshield Molding without Rain Channel is designed from the original part for an authentic fit, finish and appearance. This is a 3-sided windshield reveal molding. Black without rain channel and no corner welds.
Side Window Glass Run Channel
p/n: 70-5110-58
This Side Window Glass Run Channel strip helps to eliminate window rattle and provides a smooth sliding surface for glass movement. This strip re-lines the vent window division bar post on either the left or right side of models with metal framed door glass.
Fuel Tank Filler Vent Hose
p/n: 70-5196-41
This Fuel Tank Filler Vent Hose is designed from the original part for superior fitment and function. Works for main or auxiliary fuel tanks. This fuel resistant rubber hose is 14" long to accommodate a stock to 3" body lift.
Door Bumpers
p/n: 70-5224-71
This fully molded Door Bumper pair is a quality reproduction of the original factory part. Designed to fit on the inside of the door opening, these high-quality rubber bumpers are engineered specifically for Fiero models to reduce rattling, absorb door impact, and maintain proper factory alignment.
Headlight Bumpers
p/n: 70-5209-14
This reproduction Headlight Bumper pair is designed from the original part for an authentic fit, finish and appearance. Works to reduce rattling, absorb impact, and maintain factory alignment.
Hood Bumper Pads
p/n: 70-5214-42
This Hood Bumper Pad pair is a quality reproduction of the original factory part. This rubber bumper attaches to the hood to support / cushion the hood closure.
Clutch and Brake Pedal Pads
p/n: 70-5270-22
This Clutch and Brake Pedal Pad pair is designed to slip-over a metal pedal core. These two Pedal Pads are made of top-quality EPDM dense rubber with a high level of fit and finish.
Parking Light and Housing Gaskets
p/n: 70-5283-16
A Parking Light And Housing Gasket set designed from the original part for superior fitment and seal. This four (4) piece reproduction gasket set fits between the Parking Light Lens and the Parking Light Housing or Bezel to body.
Taillight and Housing Gaskets
p/n: 70-5289-15
A Taillight and Housing Gasket set designed from the original part for superior fitment and seal. This four (4) piece reproduction gasket set fits between the Taillight Lens and the Taillight Housing or Bezel to body.
Glove Box Bumpers
p/n: 70-5216-88
This Glove Box Bumper pair is designed from the original part for superior fitment, finish and function. A small but essential component, this glove box bumper ensures a snug and secure fit, preventing unwanted rattling and vibrations while driving.
Door Bumper - Ribbed
p/n: 70-5140-71
This Ribbed Door Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure.
Engine Compartment Access Panel Weatherstrip
This weatherstrip is a superior grade, 100% EPDM dense rubber extrusion designed to last- it will not fade, shrink or crack. Optimal for replacing old, worn or damaged Engine Compartment Access Panel Weatherstrips. Commonly used on Newmar Ventana RV models.
Window Channel Track Filler
This Window Channel Filler is wedged between the glass and the retaining metal frame to provide a secure seal. This is a direct-fit replacement for windows common to Class A and C RV's. Available in Black or White and by the foot or in 15- and 30-foot pre-cut lengths.
Brake Pedal Pad - Automatic
p/n: 70-5269-22
This reproduction Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad. Detailed and finished to match the original appearance.
Clutch and Brake Pedal Pads
p/n: 70-5268-22
This Clutch and Brake Pedal Pad pair is designed to slip-over a metal pedal core. These two Pedal Pads are made of top-quality EPDM dense rubber with a high level of fit and finish.
Sprite Window Edge Trim Weatherstrip
This Window Edge Trim Weatherstrip presses into the window retaining metal frame to provide a secure seal. This is a direct-fit replacement for windows found on Sprite 400 caravan trailers. Available by the foot or in 15ft and 30ft pre-cut lengths.
Door Bumper
p/n: 70-5141-71
This Door Bumper is a quality reproduction of the original factory part. This "flattop" rubber bumper attaches to the vehicle body to support / cushion the door closure.
Hood To Fender Bumper
p/n: 70-5138-42
This Hood to Fender Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure.
1" Screw Track Cover Trim
Easy to install, screw covers and insert trim are designed to provide a finished look. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Regulator 11/16" Roller & Rivet Assembly
p/n: 70-5295-70
A reproduction door window regulator roller and rivet (pin) assembly. This is the roller used on window regulator. Used on models where the hole in the regulator measures 1/4" inch in diameter and a 11/16" diameter roller is required.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
3/8" Window Edge Weatherstrip
This 3/8" Window Edge Weatherstrip fits between the glass and the retaining metal frame to provide a secure seal. Available by the foot or in 15- and 30-foot pre-cut lengths.
3/8" Window Edge Weatherstrip
This black 3/8" Window Edge Weatherstrip is designed to protect your RV against extreme weather and foreign elements. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Channel Trim Weatherstrip
This Window Channel Trim Weatherstrip is wedged between the glass and the retaining metal frame to provide a secure seal. This is a direct-fit replacement for windows common to Winnebago Class A RV's. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Regulator 3/4" Roller & Rivet Assembly
p/n: 70-5296-70
A reproduction door window regulator roller and rivet (pin) assembly. This is the roller used on window regulator.
Multi-Purpose Clip
p/n: 70-5279-45
This reproduction Multi-Purpose Clip is designed from the original part for an authentic fit, function and appearance. Sold individually and used for A- arm dust shields, air baffles, bumper fillers and more.
Hand Sanding Green Coarse Scotch-Brite Pad
p/n: 96-7413-96
3M Hand Sanding Green Coarse Stripping Scotch-Brite Pad offers a powerful solution for paint and varnish removal without the drawbacks of traditional steel wool. This versatile 4-3/8-inch x 11-inch green pad is designed for efficient stripping and sanding, making it an essential tool for various surface preparation tasks.
5/16" Adhesive Applicator Brush
p/n: 94-0927-94
This 5/16" Adhesive Applicator Brush is a useful tool for applying weatherstrip glue. The soft horsehair filaments provide for the precise spreading and smoothing of the adhesive. This brush is disposable after use.