9/16" Window Weatherstrip
p/n: 70-1195-52
This Window Weatherstrip is for models with lip for attaching bead molding. Available by the foot.
Outer Edge of Vent Window to Door Weatherstrips
p/n: 20-2785-62
This is the Vent Window Frame Weatherstrip for the outer edge of vent window frame to door. This special thin strip glues (adhesive is not included) on vent window frame and stops water from leaking between the vent window frame and the door.
Window Weatherstrip 5/8" x 5/8"
p/n: 70-1194-119
Made of a high-quality EPDM dense rubber extrusion. This type of window weatherstrip is commonly used for windshields, rear windows, and stationary fixed quarter windows where a chrome reveal molding is present. Available by the foot.
Window Weatherstrip 9/16" x 5/8"
p/n: 70-1195-119
Made of a high-quality EPDM dense rubber extrusion. This type of window weatherstrip is commonly used for windshields, rear windows, and stationary fixed quarter windows where a bead molding is present. Available by the foot.
13/16" Trunk Weatherstrip
p/n: 50-0161-85
This Trunk Weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
15/16" Trunk Weatherstrip
p/n: 70-0412-85
This Trunk Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
27/32" Sponge Rubber Weatherstrip
p/n: 70-0509-99
This 27/32" Sponge Rubber Weatherstrip is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Door Weatherstrip
p/n: 70-0236-73
This weatherstrip was designed for 1964–1966 Chevrolet and GMC truck doors but with its generic shape, has many uses outside of its original purpose.
5/8" Dense Rubber Weatherstrip
p/n: 30-0086-99
A high-quality dense rubber weatherstrip for a variety of uses. Available by the foot.
5/8" Side Bulb Push-On Weatherstrip
This 5/8" Side Bulb Push-On Weatherstrip is designed with high-quality EPDM sponge and dense rubber. Available by the foot or 15- and 30-foot pre-cut lengths.
5/8" Side Bulb Push-On Weatherstrip
p/n: 70-3584-140
A dual durometer rubber 5/8" Side Bulb Push-On Weatherstrip with an encased steel spine. Available by the foot for the builder’s creative application.
5/8" Side Bulb Push-On Weatherstrip
A dual durometer 5/8" Side Bulb Push-On Weatherstrip that is designed to fit 1/8" flanges. Available by the foot or 15-and 30-foot pre-cut lengths.
5/8" Side Bulb Push-On Weatherstrip
p/n: 70-3584-345
Easy to install 5/8" Side Bulb Push-On Weatherstrip designed with a flexible metal core. Available by the foot.
7/8" Peel-N-Stick Door Weatherstrip
This Door Weatherstrip is a superior product for replacing old, worn, or damaged door seals. Made of a high-quality EPDM sponge rubber and surrounded by a solid skin surface. Available by the foot and in 15 and 30 foot lengths.
7/8” Door Sponge with Peel-N-Stick
This Door Weatherstrip is a superior product for replacing old, worn, or damaged door seals. Made of a high-quality EPDM sponge rubber and surrounded by a solid skin surface. Available by the foot and in 15 and 30 foot lengths.
7/8” Peel-N-Stick Door Weatherstrip
This Door Weatherstrip is a superior product for replacing old, worn, or damaged door seals. Made of a high-quality EPDM sponge rubber and surrounded by a solid skin surface. Available by the foot and in 15 and 30 foot lengths.
7/8” Peel-N-Stick Door Weatherstrip
This Door Weatherstrip is a superior product for replacing old, worn, or damaged door seals. Made of a high-quality EPDM sponge rubber and surrounded by a solid skin surface. Available by the foot and in 15 and 30 foot lengths for your Street Rod or Custom Build project.
9/16" Side Bulb Push-On w/ Lip Edge Trim
A dual durometer 9/16" Side Bulb Push-On Edge Trim with lip and a flexible steel spine that is encased in rubber, so it won't rust. Available by the foot or 15-foot pre-cut length.
Hood to Cowl Weatherstrip
p/n: 40-0475-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip can also be used as a radiator seal. Available by the foot.
Push-On Side Bulb w/Lip Front Door Weatherstrip
Easy to install side bulb push-on weatherstrip with a flexible metal core fits flanges 1/4". Available by the foot or a pair of 14ft strips.
Side Bulb Push-On w/ Lip Edge Trim
p/n: 70-4144-140
Dual durometer side bulb push-on edge trim with an encased steel spine. Available by the foot for the builder’s creative application.
Window Weatherstrip 1/2" x 9/16"
p/n: 70-0084-119
Made of a high-quality EPDM dense rubber extrusion. This type of window weatherstrip is commonly used for windshields, rear windows, and stationary fixed quarter windows where a chrome reveal molding is present. Available by the foot.
Masking Tape - 3/4" Inch
p/n: 96-3431-96
3M Automotive Performance Masking Tape is a quality masking tape developed for the special requirements of the automotive restoration industry.
1" Bulb w/Tee Base Weatherstrip
A 1" Bulb w/Tee Base Weatherstrip that slides into a track and seals against the camper wall or slide-out wiper when the slide-out is retracted. Available by the foot or in 15ft, 30ft, 60ft pre-cut lengths.
1" Bulb w/Tee Base Weatherstrip
p/n: 70-3832-377
This easy to install 1" Bulb w/Tee Base Weatherstrip slides into a track and seals when closed upon. Available by the foot.
1" T-Rubber with Track
p/n: 70-1163-372
T-Rubber seals can be used in just about any application where the rubber is held in place with a track or channel. Many boat screen doors, shower doors, and front windshields utilize T-rubber seals. Available by the foot.
1" Vista Track Cover Insert
p/n: 70-4063-340
This 1" Track Cover Insert is commonly found on Taylor Made Vista aluminum windshield tracks on Chaparral Bow Rider boats. Easy to install, screw covers and insert trim are designed to provide a finished look. Available by the foot.
1" Windshield Weatherstrip
p/n: 70-1163-52
This Windshield Weather is commonly used for swing-out or folding type windshields and mounts into the metal channel attached to the glass. Available by the foot.
1/2" Door Top Seal
p/n: 70-0065-73
This Door Top Seal is made of high-quality EPDM dense rubber. The weatherstrip is an excellent copy of the original and fits into a light metal track. Available by the foot.
1/2" Hollow Quarter Round with Peel-N-Stick
A top-quality 1/2" x 1/2" Hollow Half Round sponge rubber weatherstrip with Peel-N-Stick. Easy to install with a bonded self-adhesive strip. Works well as a general front entry door weatherstrip on a variety of RV trailers. Available by the foot or in 5ft., 10ft., 15ft. and 30ft. pre-cut lengths.
1/2" Hollow Quarter Round with Peel-N-Stick
A top-quality 1/2" x 1/2" Hollow Quarter Round sponge rubber weatherstrip with Peel-N-Stick. The weatherstrip is ideal for marine watercraft applications and use. Available by the foot or in 5ft., 10ft., 15ft. and 30ft. pre-cut lengths.
1/2" Hollow Quarter Round with Peel-N-Stick
A top-quality 1/2" x 1/2" Hollow Quarter Round sponge rubber weatherstrip with a bonded Peel-N-Stick self-adhesive strip. Ideal for numerous uses. Available by the foot or in 5ft., 10ft., 15ft. and 30ft. pre-cut lengths.
1/2" x 1/2" Hollow Quarter Round with Peel-N-Stick
A top-quality 1/2" x 1/2" Hollow Quarter Round door weatherstrip with 3M self-adhesive backing Peel-N-Stick for your Street Rod or Custom Build project. Excellent for use in many vehicle applications.
1/2" x 5/8" Lipped Rectangular with Peel-N-Stick
Top quality 1/2" x 5/8" Lipped Edge Trim sponge rubber extrusion with Peel-N-Stick. The weatherstrip is ideal for marine watercraft applications and use. Available by the foot or in 10 and 30 foot pre-cut lengths.
1/2" x 5/8" Peel-N-Stick Rectangular Lipped Edge
This 1/2" x 5/8" Peel-N-Stick Rectangular Lipped Edge weatherstrip is made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Available by the foot or in 10ft and 30ft pre-cut lengths.
1/2" x 7/16" Peel-N-Stick Hollow Half Round Weatherstrip
A top-quality trunk and rumble seat weatherstrip with bonded 3M self-adhesive strip. Ideal for many Street Rod and Custom Build applications. Available by the foot or in 5-, 10-, 15- and 30-foot precut lengths.
1/2" x 7/16" Peel-N-Stick Hollow Half Round Weatherstrip
This half-round sponge rubber weatherstripping is perfect for your doors, compartments and hatches. Available by the foot or in 5-, 10-, 15- and 30-foot precut lengths.
1/2" x 7/16" Peel-N-Stick Hollow Half Round Weatherstrip
This top-quality sponge rubber weatherstrip provides a positive seal to access doors, crew compartments, hatches and storage lockers. Available by the foot or in 5-, 10-, 15- and 30-foot precut lengths.
1/2" x 7/16" Peel-N-Stick Hollow Half Round Weatherstrip
This half-round weatherstripping is perfect for your boat doors, compartments, and hatches. Available by the foot or in 5-, 10-, 15- and 30-foot precut lengths.
1/2" x 7/16" Peel-N-Stick Hollow Half Round Weatherstrip
Peel-N-Stick weatherstrip. A top-quality sponge rubber extrusion with bonded self-adhesive strip. Ideal for numerous uses. Available by the foot or in 5-, 10-, 15- and 30-foot precut lengths.
11/16" Bulb Weatherstrip with Track
p/n: 70-3831-377
Easy to install bulb weatherstrip slides into a track and seals when closed upon. Available by the foot.
11/16" Bulb Weatherstrip with Track
p/n: 70-3831-265
Slides into a track and seals against the camper wall or slide-out wiper when the slide-out is retracted. Available by the foot.
11/16" Compartment and Door Weatherstrip
Easy to install and great for replacing old, worn or damaged cabin and compartment door weatherstrips. Available in Peel-N-Stick by the foot or in 15 and 30 foot pre-cut lengths. Available in Glue On by the foot.
11/16" Door Weatherstrip
p/n: 70-0145-73
This Door Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
11/16" x 1/2" Door Weatherstrip
Door edge weatherstrip made from high-quality EPDM sponge rubber. Ideal for many Street Rod and Custom Build applications. Available in Peel-N-Stick by the foot and in 15 and 30 foot lengths. Available in Glue On by the foot.
11/16" x 7/16" Door Weatherstrip
p/n: 30-0243-73
Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
11/16” x 1/2" Compartment and Door Weatherstrip
This Compartment and Door Weatherstrip is a superior product for replacing old, worn, or damaged compartment and cabin door seals. Available by the foot or in 15 and 30 foot pre-cut lengths.
1-1/2" Flexible Edge Trim with Peel-N-Stick
Constructed of 100% EPDM sponge rubber and is designed to keep moisture and debris out. Available by the foot and in 10 and 30 foot lengths.
1-1/2" T-Rubber with Track
p/n: 19-0024-372
T-Rubber seals can be used in just about any application where the rubber is held in place with a track or channel. Many boat screen doors, shower doors, and front windshields utilize T-rubber seals. Available by the foot.
1-1/2" Windshield Weatherstrip
p/n: 19-0024-52
This Windshield Weatherstrip is used for various applications, but especially between the windshield frame and cowl on open cars. Available by the foot.
1-1/8" Bulb Weatherstrip with Tabs
This weatherstrip features a rigid "C Channel" section that slides onto the track located on the wiper seal. Unique tabs help prevent side-flop when compressed and increase the contact surface size at the same time. Available by the foot or in 15ft, 30ft, and 60ft lengths.
15/16" Bulb Weatherstrip with Domed Channel
Easy to install bulb weatherstrip slides onto a track, allows for cable runs, and seals the RV when the slide-out is closed. Available by the foot or in 15ft, 30ft, and 60ft lengths.
3/4" Compartment Door Weatherstrip
A top-quality EPDM sponge rubber extrusion with bonded 3M adhesive strip. 3/4-inch V-profile weatherstrip for RV hatches, access and compartment doors. Available by the foot or in 10- and 30-foot pre-cut lengths.
3/4" Medium "V" Profile Weatherstrip with Peel-N-Stick
This easily compressed sponge rubber weatherstrip extrusion offers a leak-proof seal for tight spaces. Available by the foot and in 10 and 30 foot lengths.
3/4" Side Window Weatherstrip
p/n: 70-0064-57
This general use side window horizontal weatherstrip is made of a durable dense rubber. The lower side window rubber fastens to the inner face of door to seal against the outer side of the glass. Available by the foot.
3/4" Sponge Rubber Cord
p/n: 70-4542-99
This 3/4" Sponge Rubber Cord is a high-quality sponge rubber weatherstrip. Can be used for a variety of sealing purposes. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-2401-99
High-quality EPDM sponge rubber extrusion, for a variety of uses. Available by the foot.
3/4" T-Rubber with Track
p/n: 70-0142-372
T-Rubber seals can be used in just about any application where the rubber is held in place with a track or channel. Many boat screen doors, shower doors, and front windshields utilize T-rubber seals. Available by the foot.
3/4" V-Profile Sponge Rubber w/Peel-N-Stick
This 3/4" V-Profile Sponge Rubber w/Peel-N-Stick Weatherstrip is made of a high-quality sponge rubber with premium 3M adhesive backing for a variety of uses. Available by the foot or in 10- and 30-foot pre-cut lengths.
3/4" Wide "V" Profile Weatherstrip with Peel-N-Stick
This Advanced Profile Design high-quality EPDM sponge rubber extrusion with a bonded 3M adhesive strip is ideal for hatch, cabin, and compartment doors. Available by the foot or in 10 and 30 foot pre-cut lengths.
3/4" Windshield Weatherstrip
p/n: 70-0142-52
This Windshield Weatherstrip is commonly used for swing-out type windshields and mounts into the metal channel attached to the glass. Available by the foot.
3/4" x 11/16" Peel-N-Stick Medium "V" Profile Weatherstrip
Top-quality EPDM sponge rubber trunk weatherstrip. Ideal for many Street Rod and Custom Build applications. Available by the foot and in 10 and 30 foot lengths.
3/4" x 3/4" "V" Profile Peel-N-Stick Weatherstrip
A top-quality EPDM sponge rubber trunk weatherstrip. Ideal for many Street Rod and Custom Build applications. Available in Peel-N-Stick by the foot and in 10- and 30-foot lengths. Also available in Glue-On by the foot.
3/8" Edge Trim with Top Bulb Push-On
Easy to install push-on top bulb edge trim designed with a flexible metal core. Available by the foot or in 15 and 30 foot pre-cut lengths.
3/8" Rectangular Ribbed Hollow with Peel-N-Stick
High-quality EPDM sponge rubber seal, for a variety of uses including compartment doors, access doors. This seal is easy to install and backed with the weather-resistant 3M Peel-N-Stick adhesive tape. Available by the foot or in 5ft, 10ft, and 30ft pre-cut lengths.
3/8" Ribbed Hollow Wide Rectangular with Peel-N-Stick
High-quality EPDM sponge rubber weatherstrip, for a variety of Marine uses including compartment doors and access hatch doors. This weatherstrip is easy to install and backed with the weather-resistant 3M Peel-N-Stick adhesive tape. Available by the foot and in 15 and 30 foot lengths.
3/8" Side Window Weatherstrip
p/n: 70-0079-58
Weatherstrip, side window lower edge. Available by the foot.
3/8" x 11/16" Peel-N-Stick Large Ribbed Hollow Rectangular
This top-quality Peel-N-Stick Large Ribbed Hollow Rectangular weatherstrip is excellent for use in many applications. Available by the foot and in 15 and 30 foot lengths
3/8" x 11/16" Peel-N-Stick Medium Hollow Half Round
A top-quality trunk and rumble seat weatherstrip with bonded 3M self-adhesive strip. Ideal for many Street Rod and Custom Build applications. Available by the foot and in 15 and 30 foot lengths.
3/8" x 19/32" Peel-N-Stick Ribbed Hollow Rectangular
Quality door weatherstrip with 3M self-adhesive backing for your Street Rod or Custom Build project. Excellent for use in many applications. Available by the foot and in 5ft, 10ft, and 30ft lengths.
5/16" Sash Channel Weatherstrip
p/n: 70-0585-58
This Sash Channel Weatherstrip is used for the outer side windows. Available by the foot.
5/8" Door Weatherstrip
p/n: 40-0480-73
This Door Weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
5/8" Small “V” Profile Sponge Weatherstrip with Peel-N-Stick
Provides a positive seal to access doors, compartment doors, hatches, and storage compartments. Available in Peel-N-Stick by the foot and in 15 and 30 foot lengths. Available in Glue On by the foot.
5/8" Sponge Rubber Extrusion
p/n: 70-1437-99
High-quality EPDM sponge rubber extrusion, for a variety of uses. Available by the foot.
5/8" x 3/4" Medium "V" Profile - Glue On Weatherstrip
p/n: 70-1437-109
Top-quality EPDM sponge rubber trunk weatherstrip. Ideal for many Street Rod and Custom Build applications. Available by the foot.
5/8" x 7/16" Small “V” Profile Weatherstrip
This Small "V" Profile is an excellent weatherstrip for access doors, compartment doors, hatches, and storage compartments. Available in Peel-N-Stick by the foot and in 15 and 30 foot lengths or Glue On.
5/8" x 7/16" Small “V” Profile Weatherstrip
This Small "V" Profile weatherstrip is an improved and redesigned premium door edge weatherstrip for Street Rod and Custom Build applications. Available in Peel-N-Stick by the foot and in 15 and 30 foot lengths. Available in Glue On by the foot.
7/16" Rear Window Weatherstrip
p/n: 30-0044-77
This Rear Window Weatherstrip is made of a high-quality EPDM dense rubber. Extra light, plain channel for one fourth (1/4) inch glass. Three thirty seconds (3/32) inch thick wall. Available by the foot.
7/16" T-Rubber Weatherstrip
p/n: 19-0023-73
This T-Rubber Weatherstrip, short style, is designed for windshields from a dense rubber extrusion. Available by the foot.
7/16" x 11/16" Rectangular Rounded Edge
Top-quality EPDM sponge rubber trunk and rumble seat weatherstrip. Ideal for many Street Rod and Custom Build applications. Available by the foot in Peel-N-Stick and Glue On, 10ft, and 30ft lengths.
7/16" x 11/16" Rectangular Rounded Edge with Peel-N-Stick
High-quality Peel-N-Stick sponge rubber extrusion features a bonded 3M adhesive strip. Excellent at resisting moisture, Ozone and UV exposure. Available by the foot or in 10ft and 30ft pre-cut lengths.
Dense Rubber Extrusion (General Use)
p/n: 70-2856-119
Steele Rubber Products has the best quality Dense Rubber Extrusion material for your Street Rod or Custom Build project. This weatherstrip is made from high-quality EPDM dense rubber for the Builder’s creative application and use. Excellent for use in many applications.
Finished Edge Trim with Top Bulb
Easy to install top bulb push-on edge trim with a flexible metal core fits flanges 3/16" to 1/4". Available by the foot or in 15 and 30 foot pre-cut lengths.
Flexible Edge Trim
This Flexible Edge Trim is constructed of 100% EPDM sponge rubber for long-lasting durability and features the convenient 3M Peel-N-Stick adhesive for easy installation. Available by the foot and 10 and 30 foot lengths.
Medium "V" Profile Weatherstrip
This Medium "V" Profile Weatherstrip is for small spaces including access doors, compartment doors, and hatches. The sponge rubber is ideal for creating a tight seal that won't lose its shape. Available by the foot and in 10 and 30 foot lengths.
Peel-N-Stick Door Weatherstrip
p/n: 70-0145-WT
This Peel-N-Stick Door Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Large Ribbed Hollow Rectangular
A High-quality, hollow sponge rubber extrusion weatherstrip that offers protection for your RV doors and storage compartments. This weatherstrip is easy to install and backed with the weather-resistant 3M Peel-N-Stick adhesive tape. Available by the foot and in 15 and 30 foot lengths.
Peel-N-Stick Large Ribbed Hollow Rectangular
This Peel-N-Stick Large Ribbed Hollow Rectangular weatherstrip is a high-quality EPDM sponge rubber seal, for a variety of uses. Premium 3M peel-n-stick adhesive backing. Available by the foot or in 15 and 30 foot pre-cut lengths.
Peel-N-Stick Medium "V" Profile Weatherstrip
This Advanced Profile Design seal is for small spaces. Sponge rubber is ideal for creating a tight seal that won't lose its shape. Available by the foot or in 10 and 30 foot pre-cut lengths.
Peel-N-Stick Rectangular Ribbed Hollow
High-quality EPDM sponge rubber extrusion with a bonded 3M adhesive strip. Available by the foot or in 5ft, 10ft, and 30ft pre-cut lengths.
Peel-N-Stick Rectangular Rounded Edge 11/16" x 7/16"
Peel-N-Stick weatherstrip. Top Quality extrusion with bonded self-adhesive strip. Ideal for numerous uses. Available by the foot or in 10ft and 30ft pre-cut lengths.
Peel-N-Stick Ribbed Hollow Rectangular
High-quality EPDM sponge rubber extrusion with bonded 3M adhesive strip. Available by the foot or in 5ft, 10ft, and 30ft pre-cut lengths.
Roof Top Insert Weatherstrip
p/n: 20-0102-45
A Roof Top Insert Weatherstrip for closed cars without turret top. Fits the groove between cloth top center panel and steel surround. Available by the foot.
Sponge Rubber Cushion Strip with Peel-N-Stick
Rubber cushioning strip with professional-grade 3M adhesive. Available by the foot, 10ft and 15ft lengths.
Top Bulb Push-On Edge Trim
p/n: 70-3854-140
Dual durometer top bulb push-on edge trim with an encased steel spine. Available by the foot for the builder’s creative application.
Top Bulb Push-On Weatherstrip
p/n: 70-3854-99
Top bulb push-on weatherstrip with a flexible steel spine and sponge rubber top extrusion. Available by the foot.
Trunk Weatherstrip
p/n: 30-0144-87
This Trunk Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
Window Edge Trim 5/8" x 1/4"
p/n: 40-0033-119
Made of a high-quality EPDM dense rubber extrusion. This type of window edge trim is commonly used for swing-out windshields and mounts into the metal channel attached to the glass. Available by the foot.
Window Edge Weatherstrip
p/n: 70-4499-357
This 1-1/16" Window Edge Weatherstrip fills the gap between the glass and the channel to hold the glass securely in place. Available by the foot.
Window Weatherstrip 1" x 1/4"
p/n: 70-1163-119
Made of a high-quality EPDM dense rubber extrusion. This type of T-Rubber Window Weatherstrip is commonly used for windshields, rear windows and stationary glass where the rubber is held in place with a track or channel. Available by the foot.