Fuel Neck Grommet
p/n: 25-0013-41
Grommet, fuel filler neck. Virtually exact copy for two and one fourth (2-1/4) inch diameter filler neck through body or fender.
Fuel Neck Grommet
p/n: 70-0599-39
Grommet, fuel filler neck, through rear fender splash panel. Fully molded rubber. Four and five eighths inch (4 5/8") outside diameter by two and three sixteenths inch (2 3/16") inside hole diameter.
Gas Filler Neck Seal Kit
p/n: 70-3763-39
This two (2) piece kit includes the gas tank filler neck upper and lower collar seals. These seals prevent gas fumes from entering the cabin. The upper seal fits on top of the fuel neck and seals against the back side of the fender behind the taillight. The collar seals the neck where it goes through rear fender splash panel on the trunk floor.
Gas Tank Filler Upper Seal
p/n: 70-3701-39
This Gas Tank Filler Upper Seal fits on top of the fuel neck and seals against the back side of the fender behind the taillight. A premium part fully molded with high quality EPDM rubber.
Gravel Shield
p/n: 50-0439-44
Gravel shield, rear fender. Fully molded with metal backing and attaching tabs.Length: 15.75 inches.
Gravel Shield
p/n: 50-0454-44
Gravel shield, rear fender. Molded in-car position with metal backing and holding tabs.Length: 15.75 inches.
Gravel shield
p/n: 70-0595-47
Stone shield (gravel guard), rear fender, black rubber molded to proper form with rubber tabs (no metal backing). Right and left, excellent copy.
Gravel shield
p/n: 70-0477-44
Gravel shield between body and rear fender, right and left, steel core.
Gravel Shield
p/n: 27-0065-44
Stone shield, front fender. Molded left and right.Length: 12.125 inches.
Gravel Shields - Rear Fender
p/n: 70-0476-44
A right and left hand rear fender Gravel Stone Shield pair. Fully molded to original contour with attaching tabs and steel backing plate. Will fit fender contour perfectly without puckering as happens with others made flat. For models without running boards.
Gravel Stone Shields - Rear Fender
p/n: 60-0575-45
A right and left hand rear fender Gravel Stone Shield pair carefully tooled and crafted to factory design.
Headlight Bracket Pad
p/n: 50-0222-14
Headlight bracket-to-fender pad. POA #1245890-1, right and left.
Headlight Bucket To Fender Gasket
p/n: 20-1542-14
This Headlight Bucket To Fender Gasket is designed from the original part for superior fitment and seal. These gasket fits the headlight bucket and front fender.
Headlight Bucket to Fender Seals
p/n: 70-3085-14
This two (2) piece Headlight Bucket to Fender Seal pair is designed from the original part for superior fitment and seal. Die cut from original style masticated rubber for a like factory fit.
Headlight Door To Fender Gasket
p/n: 20-1005-14
This Headlight Door To Fender Gasket pair is designed from the original part for superior fitment, appearance and seal. This gray rubber seal fits between the headlight door (bezel) and front fender.
Headlight Mounting Pad
p/n: 40-0300-14
Mounting pad, headlight bracket to fender. This is a plain, flat, reversible un-beaded pad as original.Length: 6.4375 inches.
Headlight Mounting Pad
p/n: 30-0265-14
Mounting pad, headlight bracket to fender. Molded right and left with proper beading and shape as original.Length: 9.375 inches.
Headlight Mounting Pad
p/n: 40-0059-14
Pad, headlight bar to fender mounting. Four and three fourths (4-3/4) inch by one and one fourth (1-1/4) inch.Length: 4.75 inches. Width: 1.25 inches.
Headlight Mounting Pad
p/n: 30-0142-14
Gaskets, headlight body mounting to fender. Cut to exact size as original.
Headlight Mounting Pad
p/n: 50-0218-14
Headlight bracket-to-fender mounting pads. Replaces #1283932-3, right and left.
Headlight Mounting Pad
p/n: 30-0354-14
Gasket, headlight front assembly to fender. Between headlight bucket and the fender receiver hole. One (1) pair per car, sold only in pairs.
Headlight Mounting Pad
p/n: 30-0145-14
Pads, headlight bracket to fender mounting. Proper edge form.Length: 4.375 inches.
Headlight Mounting Pad
p/n: 70-0256-21
Mounting pad, horn and headlight brace rod to fender. One and one half (1-1/2) inches by three and one eighth (3-1/8) inches outside diameter.
Headlight Mounting Pad
p/n: 30-0291-14
Pads, headlight support bar to fender. Molded right and left.Length: 3.75 inches. Width: 3.75 inches.
Headlight Mounting Pad
p/n: 50-0462-14
Headlight housing to fender gasket. Steel rule die-cut replacement for #1320452.
Headlight Mounting Pad
p/n: 10-0122-14
Pad, headlight housing to the mounting bracket that secures the housing to the fender.
Headlight Mounting Pad
p/n: 70-0343-14
Mounting pads, headlight bracket to fender, right and left. Length: 11.375 inches.
Headlight Mounting Pad
p/n: 30-0133-14
Pads, headlight bracket mounting to fender. Molded left and right. Proper construction with beading as original. Sold in complete pairs only.Length: 9.
Headlight Mounting Pad
p/n: 60-0211-14
Mounting pad, headlight bracket to fender.Length: 4.8125 inches.
Headlight Mounting Pad
p/n: 60-0558-14
Pad, headlight bracket at fender. See also our #60-0178-14. Two and one eighth (2-1/8) inch by three and seven sixteenths (3-7/16) inch.Length: 3.
Headlight Mounting Stand Pads
p/n: 20-0316-14
This Headlight Mounting Stand Pad pair is designed from the original part for an authentic fit, finish, and appearance. These mounting pads fit between the headlight stands and the front fenders.
Headlight Seal
p/n: 27-0090-119
Steele Rubber Products has the best quality headlight seals for your Street Rod or Custom Build project.These headlight seals are made of top-quality EPDM rubber with a high level of fit and finish for the Builder’s creative application and use.
Headlight seal
p/n: 70-2574-14
Seal, headlight to front fender retainer seal. Fully molded to fit like original, unlike a extruded strip that will buckle.
Headlight to Fender Gasket
p/n: 50-0563-14
Seal, headlight to fender. Die cut to original dimensions.Height: .125 inches.
Headlight to fender gasket
p/n: 20-2295-14
Gasket, headlight bucket to fender. Cork. Two (2) required per vehicle.