Top Iron Door To Roof Rail Weatherstrip
p/n: 20-2225-65
This Convertible Roof Rail Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip seals the top iron to the door glass.
Quarter Window Outer Weatherstrip - LH or RH
p/n: 70-5329-77
This Quarter Window Outer Weatherstrip is designed from the original part for superior fitment and seal. This LH or RH molded weatherstrip seal fits in between the quarter glass frame and the body.
Hood To Cowl Weatherstrip
p/n: 70-4951-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Slide-Out Flipper Bumper Set
This four (4) piece Slide-Out Flipper Bumper Set is designed to "flip" the wiper weatherstrip when cycling the slide-out of your RV in or out. This Steele Rubber Products flipper bumper set is manufactured from top quality EPDM dense rubber. Available in Black and White.
Vent Window Rubber Retention Clips
p/n: 70-5321-62
An eight (8) piece set of Vent Window Rubber Retention Clips. These clips are used to retain the vent window rubber weatherstrips within the metal vent window frame.
Radiator Support To Top Of Radiator Weatherstrip
p/n: 20-0127-31
This Radiator Support To Top Of Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction which includes special plastic buttons to install.
Tailgate Lower Seal
p/n: 70-4010-85
This Tailgate Lower Seal is properly molded from originals for a factory like fit. The seal is installed using screws, which are included.
Quarter Window Beltline Retainer Set
p/n: 70-4193-62
This Quarter Window Beltline Retainer hardware set is designed from the original part for a like original fitment.
Windshield Frame Lower Weatherstrip
p/n: 70-4477-52
This Windshield Frame To Body Lower Weatherstrip is designed from the original part for superior fitment and sealing. This is the lower windshield frame hinge weatherstrip. It mounts to seal between the windshield frame and the cowl with the bead facing to the inside of the vehicle.
Firewall To Hood Weatherstrip
p/n: 20-2751-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay firewall directly to the body to keep water and debris out.
Trim Pad Removing Tool
p/n: 94-0108-94
This Trim Pad Removing Tool works to remove reveal moldings and other trim pieces.
Windshield Molding w/o Rain Channel
p/n: 70-5266-52
This reproduction Windshield Molding without Rain Channel is designed from the original part for an authentic fit, finish and appearance. This is a 3-sided windshield reveal molding. Black without rain channel and no corner welds.
Multi-Purpose Clips
p/n: 70-4802-45
A ten (10) piece set of Multi-Purpose Clips. Commonly used to retain Hood to Cowl Weatherstrips or Inner Fender Splash Panels.
Front Bow Weatherstrip
p/n: 12-0016-64
This Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs directly to the windshield top. Original type sponge rubber. Four (4) foot strip.
1-1/16" Trunk Weatherstrip
p/n: 70-0650-85
This Trunk Weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
15/16" Trunk Weatherstrip
p/n: 70-0490-85
This Trunk Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
3/4" Bulb with Track
p/n: 30-0085-377
Easy to install bulb seal slides into a track and seals when closed upon. Available by the foot.
5/16" Fuel Tank Support Pad
p/n: 30-0482-119
This 5/16" Fuel Tank Support Pad weatherstrip is made from high-quality EPDM dense rubber for the Builder’s creative application and use.
5/8" Door Weatherstrip with Clips
p/n: 70-1112-73
This Door Weatherstrip with Clips is made made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
7/8" Door Weatherstrip
p/n: 70-0492-73
This Door Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
Front Fender or Quarter Panel Extensions
p/n: 20-2761-45
This Front Fender or Rear Quarter Panel Extension pair is designed from the original part for superior fitment and seal. The pair comes as one solid unit that is perforated for the customer to split apart and is easy to install.
Windshield Weatherstrip
p/n: 19-0004-52
This Window Weatherstrip is made of a high-quality EPDM dense rubber extrusion. Available by the foot.
Convertible Roof Rail Weatherstrip
p/n: 20-1636-65
This Convertible Roof Rail Weatherstrip is designed from the original part for superior fitment and seal. This window channel seal fits between windshield posts and door. Also fits along the top irons. This part is one (1) each. Five (5) individual pieces are required for the complete top.
Vent division bar weatherstrip
p/n: 20-0708-56
Front vent window division post seal. Extruded rubber strip only that will have to be attached to division post.
1/2" Hollow Rectangular Dense Extrusion
p/n: 70-1583-377
Rectangular seals are perfect seals for your boat doors, compartments and hatches. Available by the foot.
1-1/4" Sponge Rubber Extrusion
p/n: 70-1036-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-1670-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-1669-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-1667-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-1666-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-1266-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Trunk Weatherstrip
p/n: 70-0463-85
This Trunk Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.
5/8" Sponge Rubber Extrusion
p/n: 70-1674-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
5/8" Sponge Rubber Weatherstrip
p/n: 70-1665-99
This Sponge Rubber Weatherstrip is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
5/8" Tabbed Bulb with Track
p/n: 30-0051-377
Easy to install Tabbed Bulb Weatherstrip slides into a track and seals when closed upon. Available by the foot.
1" x 1-1/2" Rectangular Hollow Square Edge with Peel-N-Stick
EPDM sponge rubber extrusion with 3M bonded adhesive backing. Ideal for marine applications such as transom doors and deck lockers. Available by the foot or in 15 and 30 foot lengths.
1" x 1-1/2" Rectangular Peel-N-Stick
This Rectangular weatherstrip is ideal for heavy compartment doors, basement doors, and ramp gates requiring a high level of weather resistance and durability from shock or heavy compression loads. Available by the foot or in 15 and 30 foot lengths.
1/2" Double Hollow Round Hollow with Peel-N-Stick
This 1/2" Double Hollow Round Hollow with Peel-N-Stick is made of a high-quality durable and weather-resistant EPDM sponge rubber. Makes for an excellent compartment door weatherstrip. Available by the foot and in 15 and 30 foot lengths.
Liftgate Upper Edge Weatherstrip
p/n: 70-4139-85
This Liftgate Upper Edge Weatherstrip seal is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals the upper edge.
Tonneau Cover Weatherstrip with Peel-N-Stick
A high-quality sponge rubber double bulb extrusion for a variety of general uses. Premium 3M Adhesive backing. Great upgrade weatherstrip from the originals found on truck caps and tonneau covers. Available by the foot and in 15 and 30 foot lengths.
Tonneau Cover Weatherstrip with Peel-N-Stick
A high-quality sponge rubber double bulb extrusion for a variety of general uses. Premium 3M Adhesive backing. Ideally suited to serve as a Tonneau Cover Weatherstrip. Available by the foot or in 15 and 30 foot pre-cut lengths.
7/16" Dense Rubber Extrusion (General Use)
p/n: 19-0006-99
High-quality dense rubber seal, for a variety of uses. Available by the foot.
Window Weatherstrip 7/16" x 7/8"
p/n: 19-0006-119
Made of a high-quality EPDM dense rubber extrusion. This type of window weatherstrip is commonly used for windshields, rear windows, and stationary fixed quarter windows. Available by the foot.
1-1/16" Sponge Rubber Extrusion
p/n: 70-1037-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The generic design makes it optimal for a variety of uses. Available by the foot.
15/16" Sponge Rubber Extrusion
p/n: 70-1677-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 82-0216-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. Commonly used as a door edge weatherstrip. Available by the foot.
Cowl Vent Weatherstrips
p/n: 20-0705-54
This six (6) piece Cowl Vent Weatherstrip set is used to reduce noise from the cowl vent screen. These U-Shaped stripes are designed for a superior fitment and seal.
1" Top Bulb with Tab Push-On
p/n: 70-2831-345
Easy to install push-on seal designed with a flexible metal core. Available by the foot.
11/16" Dense Rubber U-Channel
p/n: 70-2093-357
High-quality channel filler weatherstrip secures windshield to eliminates rattle. Available by the foot.
11/16" Door Weatherstrip
p/n: 70-0491-73
This Door Weatherstrip for the side window is made of an extruded sponge rubber. The weatherstrip is the larger type that is used on most GM cars this period. Available by the foot.
11/16" x 13/16" Glue On Door Weatherstrip
p/n: 70-0491-109
Steele Rubber Products has the best quality door weatherstrip for your Street Rod or Custom Build project. Excellent for use in many applications. Available by the foot.
1-1/8" Sponge Rubber Extrusion
p/n: 70-1663-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
13/16" Sponge Rubber Extrusion
p/n: 70-1678-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
15/16" Sponge Rubber Extrusion
p/n: 70-3155-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3-3/4" Peel-N-Stick Wiper with Track Weatherstrip
This 3-3/4" Peel-N-Stick Wiper Weatherstrip is used to create a dynamic seal that keeps weather and foreign elements out. Available by the foot or in 15ft, 30ft, and 60ft pre-cut lengths.
5/8" Sponge Rubber Extrusion
p/n: 40-0443-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
Dense Rubber Extrusion (General Use)
p/n: 70-2093-99
High-quality dense rubber seal, for a variety of uses. Available by the foot.
Dense Rubber Extrusion (General Use)
p/n: 19-0005-99
High-quality dense rubber seal, for a variety of uses. Available by the foot.
Door Weatherstrip
p/n: 40-0168-73
This Door Weatherstrip is generally used as a hinge post on door or body opening, in area around hinges where irregular cross section is required. Available by the foot.
Door Weatherstrip
p/n: 70-1292-73
This Door Weatherstrip is used on the bottom of the door opening. Available by the foot.
Door Weatherstrip
p/n: 70-1448-73
This Door Weatherstrip for the door sill is made of an extruded dense rubber. Available by the foot.
Quarter Window Weatherstrip
p/n: 19-0005-119
Dense rubber quarter window weatherstrip for your Street Rod or Custom Build project. Excellent for use in many applications. Available by the foot.
Top Bulb Push-On Edge Trim
p/n: 70-2831-140
Dual durometer top bulb push-on edge trim with an encased steel spine. Available by the foot for the builder’s creative application.
Top Bulb Push-On Seal
p/n: 70-2831-277
This Top Bulb Push-On Seal is designed with high-quality EPDM sponge and dense rubber. Available by the foot.
Top Bulb Push-On Weatherstrip
p/n: 70-2831-99
Bulb on top, push-on type weatherstrip. Manufactured with flexible metal core with sponge and dense rubber construction. Available by the foot.
Universal Mounting Pad
p/n: 70-0019-52
This Universal Mounting Pad is a heavy rubbery pad with half round 3/16" bead for windshield frame mounting to cowl on open cars. Available by the foot.
1" Sponge Rubber Extrusion
p/n: 70-0906-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
1-1/16" Trunk Weatherstrip
p/n: 70-0346-85
This Trunk Weatherstrip is designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.
13/16" Sponge Rubber Extrusion
p/n: 40-0441-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
13/16" Sponge Rubber Extrusion
p/n: 40-0442-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
13/16" Sponge Rubber Extrusion
p/n: 70-3154-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
15/16" Sponge Rubber Extrusion
p/n: 70-2329-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-3658-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The generic design makes it optimal for a variety of uses. Available by the foot.
3/4" Sponge Rubber Extrusion
p/n: 70-0839-99
This Sponge Rubber Extrusion is made of a quality EPDM sponge rubber. The universal design makes it optimal for a variety of uses. Available by the foot.