Tailgate or Back Door Weatherstrip
p/n: 70-3604-84
This Tailgate or Back Door Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts with properly spaced plastic clips around the full perimeter of the rear opening.
Front Door Hinge Pillar Weatherstrips
p/n: 70-0481-73
This at dash left and right Front Door Hinge Pillar Weatherstrip pair is designed from the original part for an authentic fit, finish and appearance. Located at top front of front door, under door flange. A reproduction molded over a metal core.
Hood To Cowl Weatherstrip
p/n: 50-0501-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-2341-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. A proper extrusion approximately sixty-two (62) inches long with pre-installed fastener clips.
Hood To Cowl Weatherstrip
p/n: 70-3399-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Vent Window Weatherstrip
p/n: 40-0502-57
This Vent Window Weatherstrip is a cushion for under the vent window frames. Measures 4.375 inches in Length. Sold as a pair.
U Jamb Door Lock Pillar Fillers
p/n: 82-0053-79
This quarter to side window U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Convertible Top Rear Bow Weatherstrip
p/n: 70-3257-64
This Convertible Top Rear Bow Weatherstrip is designed from the original part for superior fitment and seal. Reproduction EPDM rubber weatherstrip attaches to the convertible top frame and seals to the deck lid.
U Jamb Door Lock Pillar Fillers
p/n: 50-0397-79
This quarter to side window U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
U Jamb Door Lock Pillar Fillers
p/n: 70-0844-79
This quarter to side window U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Locking Strip Glass Installation Kit
p/n: 90-3356-90
This Locking Strip Glass Installation Kit has the products generally needed for the quality completion of a glass installation project. This kit services those applications where the glass and weatherstrip seal are installed and then use a locking strip to secure the installation in place.
1/2" x 11/16" Peel-N-Stick-Weatherstrip
This 1/2" x 11/16" Peel-N-Stick Weatherstrip is a superior product for replacing old, worn, or damaged weatherstripping. This easy to install peel-n-stick (no-glue needed) weatherstrip is available by the foot and in convenient 15 and 30 foot pre-cut lengths.
Inner Header Weatherstrip
p/n: 70-5063-68
This Inner Header Weatherstrip is designed from the original part for an authentic fit, finish, and appearance. Mounts on the rear of the metal cab with weatherstrip adhesive glue (not included) and presses against the hardtop shell weatherstrip.
Side Window Leading Edge
p/n: 20-2605-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Leading Edge
p/n: 20-2604-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Vertical Leading Edge
p/n: 60-0662-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Vent Window Division Bar Weatherstrips
p/n: 50-0386-56
This Front Vent Division Bar Weatherstrip pair is fully molded with a metal core and attaching tabs. This piece mounts on the vertical division bar and seals as the vent glass closes against it.
Hood to Cowl Weatherstrip
p/n: 70-4280-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Window Felt Beltline Weatherstrips
p/n: 80-0630-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece "Anti-Rattler" set includes inner and outer window felt beltline weatherstrips for each door side window.
Window Felt Beltline Weatherstrips
p/n: 80-0631-57
Made from Original style material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. This four (4) piece "Anti-Rattler" set includes inner and outer window felt beltline weatherstrips for each door side window.
Beltline weatherstrip
p/n: 50-0380-60
Weatherstrip, quarter window beltline inner. Mohair faced with attaching clips as original.
Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door Auxiliary Weatherstrip Set
p/n: 60-0342-73
This six (6) piece Door Auxiliary Weatherstrip set is designed from the original part for superior fitment and seal. The Auxiliary Weatherstrip, also known as a "J" seal, installs on the door front at the beltline, right and left sides of the vehicle.
Hatchback Weatherstrip
p/n: 82-0102-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch opening directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-3350-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion and pre-installed fastener clips.
U Jamb lock pillar filler
p/n: 20-1195-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Windshield Weatherstrip Set
p/n: 70-3915-50
This four (4) piece Windshield Weatherstrip Set works to install the Corvette windshield with a precise, like factory fit. Parts are designed from originals to fit correctly.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
U Jamb Door Lock Pillar Fillers
p/n: 70-0954-79
This quarter to side window U Jamb Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Vent Division Post Weatherstrips
p/n: 70-1585-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division post with rivets and seal as the vent glass closes against them.
Window Beltline Rubber Weatherstrips
p/n: 81-0029-57
This is a quality Window Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This all rubber four (4) piece set includes inner and outer beltline weatherstrips for each door side window.
Convertible Roof Rail Center Weatherstrips
p/n: 70-5077-65
This Convertible Roof Rail Center Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip pair installs directly to the center section of the roof rails on the convertible top.
Convertible Roof Rail Front Weatherstrips
p/n: 70-5076-65
This Convertible Roof Rail Front Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip pair installs directly to the front section of the roof rails on the convertible top.
Convertible Roof Rail Rear Weatherstrips
p/n: 70-5078-65
This Convertible Roof Rail Rear Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip pair installs directly to the rear section of the roof rails on the convertible top.
Coupe Hinge Pillar Weatherstrips
p/n: 70-3934-63
This Coupe Hinge Pillar Weatherstrip attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hardtop Roof Rail Weatherstrips
p/n: 60-0525-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Rear Cargo Right Door Weatherstrip
p/n: 70-4886-73
This Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and function. This weatherstrip fits on the opening of the rear door on the passenger side of the van.
Side window leading edge
p/n: 60-0656-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Window Felt Outer Beltline Weatherstrips
p/n: 80-1124-57
This is a quality material style Window Felt Outer Beltline Weatherstrip pair. This ready to install two (2) piece beltline pair includes Only the Outer window felts (the part sealing the outside of the vehicle) for the door side windows.
Rear Vent Window Division Post Weatherstrips
p/n: 70-0783-74
This Rear Door Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This seal is fully molded with EPDM rubber over brass metal cores. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Beltline Weatherstrip
p/n: 30-0300-58
Window felt inner and/or outer. Flexible, pile lined, rubber covered, with stainless bead. Available in 3ft pair.
Front Door Weatherstrips
p/n: 82-0130-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary front door weatherstrips install with pins to seal the driver and passenger doors when closed.
Hood To Cowl Weatherstrips
p/n: 60-0428-42
This Hood To Cowl Weatherstrip pair is designed from original parts so it fits correctly. The pair comes ready to install with pre-punched holes.
Taillight to Body Weatherstrips
p/n: 70-0701-15
This Taillight To Body Weatherstrip pair is designed from the original part for superior fitment and sealing. These reproduction gaskets fit between taillight frame housing and the body. Twenty-three and three fourths (23-3/4) inches developed length.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.