Leading Edge Weatherstrip
p/n: 70-2002-80
Rear door window vertical seals. Fully molded rubber with metal cores.
Radiator Support To Hood Seal - With A/C
p/n: 20-1082-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. This rubber weatherstrip fits at the front of the vehicle to seal between the radiator and the hood when hood is closed. Installation Push-Pins are included.
Vent division bar weatherstrip
p/n: 20-1893-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Division Bar Weatherstrip
p/n: 20-0527-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-1894-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Window Felt Outer Beltline Weatherstrip
p/n: 80-1051-57
An outer side window horizontal weatherstrip pair (also known as beltline weatherstrip). This ready to install two (2) piece pair includes only the outer seals (the part sealing the outside of the vehicle) for both side door windows.
Sash Channel Weatherstrips
p/n: 60-0690-58
A correct extrusion Sash Channel Weatherstrip pair made from high-quality EPDM rubber. Two (2) strips cut twenty-five and one-half (25-1/2) inches long.
1" x 1/4" Rectangular Sponge Rubber Door Weatherstrip
p/n: 70-4306-472
This is a convenient twelve (12) foot length of rectangular 1" x 1/4" weatherstrip for compartment, cabin and crew doors. Made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion.
Cowl Vent Weatherstrip
p/n: 70-0143-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seals. Manufactured from a dense rubber construction.
Window Felt Beltline Weatherstrips
p/n: 80-1023-57
This four (4) piece inner and outer Window Felt Beltline Weatherstrip set is for both driver and passenger rear doors. These beltline moldings mount on the top inner and outer part of the door to wipe the side windows when the glass is lowered.
Quarter Window Leading Edge
p/n: 70-1556-130
A high quality Quarter Window Leading Edge weatherstrip extrusion for your Street Rod or Custom Build project. Excellent for use in many applications. Available as a pair.
Side Window Vertical Leading Edge
p/n: 70-1556-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Peel-N-Stick Trunk Weatherstrip
p/n: 82-0028-WT
This Steele exclusive Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. This easy to install weatherstrip mounts around the full perimeter of the trunk directly to the body.
Cowl to Fender Filler Weatherstrips
p/n: 70-3940-43
This Cowl To Fender Filler Weatherstrip pair is made from top quality rubber and designed from originals for a superior fitment and seal.
Convertible B-Pillar End Cap Fillers
p/n: 70-4192-63
This Convertible B-Pillar End Cap Filler pair is designed from the original part for superior fitment and sealing. This rubber filler pair attaches to the body B-Pillars to seal between that quarter post and the door when closed.
Door Auxiliary Weatherstrips
p/n: 70-3931-73
This front Door Auxiliary ("J-Strip") Weatherstrip pair is designed from the original parts for superior fitment and seal. These two (2) glue-on strips, one for each door, are manufactured for a factory like fit.
Hatchback Weatherstrip
p/n: 20-2864-84
This Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the hatch area directly to the body.
Hood To Cowl Weatherstrip
p/n: 70-1751-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. A reproduction using a sponge rubber extrusion and fastener clips.
Convertible Top Decklid Weatherstrip
p/n: 70-3950-67
This Convertible Top Decklid Weatherstrip is designed from the original part for a superior fitment and seal. This rubber seal mounts around the full perimeter of the soft top storage compartment.
Tailgate Bumper Set
p/n: 70-4494-87
This four (4) piece Tailgate Bumper Set is designed from the original part for superior fitment and function. These bumpers fit on each side of the body to tailgate opening at the bottom of the opening and on each side.
Tailgate to Body Bumpers
p/n: 70-4493-87
This Tailgate to Body Bumper pair is designed from the original part for superior fitment and function. This body bumper fits on each side of the body to tailgate opening on the body and adjacent to the striker knob on each side.
Vent Window Division Post Weatherstrips
p/n: 20-0562-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division post with rivets and seal as the vent glass closes against them.
Beltline Weatherstrip
p/n: 70-3866-57
Window felt inner and/or outer. Flexible, pile lined, rubber covered, with stainless bead. Available in 2ft pair.
Beltline Weatherstrip
These general use side window horizontal weatherstrips are flexible, pile lined, rubber covered, with a stainless bead. Available in 2ft and 3ft pairs.
Front Door Hinge Pillar Weatherstrips
p/n: 70-0552-73
This Front Door Hinge Pillar Weatherstrip pair is designed from the original parts for superior fitment and seal. The pair attaches above the beltline, hinge pillar windshield post. These two (2) strips with pre-installed clips, one for each door, are manufactured for a factory like fit.
Hood To Radiator Weatherstrip
p/n: 70-4889-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Hood To Radiator Weatherstrip
p/n: 70-4890-43
This Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Hood To Fender Weatherstrips
p/n: 70-0540-42
This Hood To Fender Weatherstrip pair is a quality reproduction of the original factory part. An exact copy of the original profile. Approximately thirty-six (36) inches long.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Steele exclusive Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. This easy to install weatherstrip mounts around the full perimeter of the trunk directly to the body.
Vent division bar weatherstrip
p/n: 20-0021-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Cowl Vent Gasket
p/n: 60-0081-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. This gasket works to seal the cowl vent when closed into the cowl body. Made from top quality rubber to ensure durability and proper seal.
Convertible A-Pillar Post Weatherstrips
p/n: 20-1912-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing.. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Cowl To Fender Weatherstrips
p/n: 20-0220-44
This reproduction Cowl To Fender Weatherstrip pair is designed from the original part for an authentic fit, finish and function. Fits to the cowl side panel to fender. Includes fasteners.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Outer Beltline Weatherstrips - 44 Inch Pair
p/n: 70-5191-61
A pair of forty-four (44) inch long Outer Beltline Weatherstrips. Chrome edge metal spine with rubber lip and a flocked surface for glass to slide on. Typically used as outer window felt beltline moldings for front door windows, rear door windows or quarter windows for Street Rods and Customs.
Window Felt Beltline Weatherstrips - 44 Inch Pair
p/n: 70-5190-57
These 11/16" wide general use side window horizontal weatherstrips are thick pile felt lined and without a chrome bead. A forty-four (44) inch pair.
Window Felt Beltline Weatherstrips
p/n: 80-1024-57
This four (4) piece inner and outer Window Felt Beltline Weatherstrip set is for both driver and passenger front doors. These beltline moldings mount on the top inner and outer part of the door to wipe the side windows when the glass is lowered.
Hood To Cowl Weatherstrip
p/n: 50-0486-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
11/16" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0135-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
Auxiliary Door to Body Weatherstrip
p/n: 70-4081-73
This Auxiliary Door to Body Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the body over the front or rear door to seal against the top of the door.
Hood to Radiator Weatherstrip
p/n: 40-0512-42
Weatherstrip, hood to grill or radiator shroud. Two (2) pieces, each sixteen (16) inches.Width: 1.3125 inches.
Peel-N-Stick Hatch & Door Seal
p/n: 83-0137-477
This sponge rubber weatherstrip provides a positive seal to access doors, crew compartments, and storage lockers. Available in 10ft lengths.
Roof Side Rail Weatherstrip
p/n: 20-3090-62
Seals, roof side rail center. Installs on roof rail where quarter window rolls up to back of front door glass.
Side Window Vertical Leading Edge
p/n: 82-0019-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Vent division bar weatherstrip
p/n: 20-3040-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-3042-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.