2-1/2" Wide Tan Bow Drill Cloth Tape - with Adhesive
p/n: 70-1173-65
This Tan Bow Drill Cloth Tape is used for covering convertible side window weatherstrip. This material measures two and one half (2-1/2) inches by five (5) foot roll with a pressure sensitive adhesive.
Tailgate Weatherstrip
p/n: 70-4839-85
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on 3 sides of the tailgate with weatherstrip adhesive (not included).
Vent Window Division Post Weatherstrips
p/n: 70-1921-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division post with rivets and seal as the vent glass closes against them. Fully molded with metal core and pre-drilled holes.
Cowl Ventilator Grille Weatherstrips
p/n: 20-1886-54
These Cowl Ventilator Grille Weatherstrips are used to reduce noise from the cowl top ventilator grille. These U-Shaped stripes are designed for a superior fitment and seal.
3M Super Weatherstrip Adhesive - (Black - 5 oz.)
p/n: 96-8008-96
This Super Weatherstrip Adhesive is designed to bond seals and gaskets to metal to ensure a waterproof and airtight seal inside your vehicle. Black in color - 5 oz. tube.
3M Super Weatherstrip Adhesive (Black)
p/n: 96-8008-496
This Super Weatherstrip Adhesive is designed to bond seals and gaskets to metal to ensure a waterproof and airtight seal inside your vehicle. Black in color. Available in 2 oz and 5 oz tube.
3M Super Weatherstrip Adhesive (Black)
p/n: 96-8008-296
This Super Weatherstrip Adhesive is designed to bond seals and gaskets to metal to ensure a waterproof and airtight seal inside your vehicle. Black in color. Available in 2 oz and 5 oz tube.
3M Super Weatherstrip Adhesive (Black)
p/n: 96-8008-396
This Super Weatherstrip Adhesive is designed to bond seals and gaskets to metal to ensure a waterproof and airtight seal inside your vehicle. Black in color. Available in a 2 oz and 5 oz tube.
Performance Hood Weatherstrip
p/n: 70-5124-31
This Performance Hood Weatherstrip is designed for superior fitment and seal. This non-factory add on weatherstrip works to prevent the ingress of dirt and water into the under-hood area. Easy to install.
Universal Trim Hook Tool
p/n: 94-6824-94
Steele Rubber Products offers the best quality installation tools. This Universal Trim Hook Tool is designed to safely pry small bezel components from interiors without damage. Made of durable plastic.
Lower Door Weatherstrips
p/n: 20-0391-73
This Lower Door Weatherstrip pair is designed from the original part for superior fitment and seal. These secondary door weatherstrips mount in channels on the cab body at the lower door opening. Works to seal the bottom of the doors against the vehicle body when the door is closed.
Convertible Top Weatherstrip Fastener Set
p/n: 70-4759-67
This sixteen (16) piece Convertible Top Weatherstrip Fastener Set is designed from the original part for superior fitment, finish and function. An exact copy of originals. The set includes 16 zinc plated special tube nuts and 16 special washers.
Rear Hatchback Door Window Glass Weatherstrip
p/n: 70-4826-81
This Rear Hatchback Door Window Glass Weatherstrip is designed from the original part for superior fitment and seal. A reproduction of edge channel that surrounds the metal edge were the rear hatch window glass touches the hatch door.
Vertical Door Weatherstrip - Extended Cab
p/n: 70-5089-73
This Vertical Door Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs on the vertical side that meets the front door of the right rear extended cab suicide door.
Door Lock Weatherstrip
p/n: 50-0172-70
Weatherstrip, door lock, front and rear. Protects door lock mechanism from dust and weather.Length: 3.625 inches.
Liftgate Hinge Weatherstrip
p/n: 70-5100-85
This Liftgate Hinge Weatherstrip is designed from the original part for superior fitment and seal. This peel-n-stick weatherstrip works to provide a tight seal around the closed liftgate.
Tailgate Bottom Weatherstrip
p/n: 70-5102-85
This Tailgate Bottom Weatherstrip is designed from the original part for superior fitment and seal. A peel-n-stick weatherstrip that works to provide a tight seal between the closed tailgate at the bottom.
Tailgate Opening Weatherstrips
p/n: 70-5101-85
This Tailgate Opening Weatherstrip is designed from the original part for superior fitment and seal. This peel-n-stick weatherstrip pair works to provide a tight seal around the closed tailgate.
Back Of Door Weatherstrips - Convertible
p/n: 20-1648-73
This Back Of Door Weatherstrip pair is designed from the original part for superior fitment and seal. Left and Right door weatherstrips to fit to the back of the door.
Front Bow Weatherstrip
p/n: 20-2094-64
This Convertible Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This sponge rubber weatherstrip attaches to the wooden header bow on convertible soft-top models.
Front Door Lock Pillar Filler
p/n: 70-0834-79
This Front Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This left and right weatherstrip filler seals the bottom at the front of the rear side window. Also known as a door jamb seal.
Hood To Cowl Weatherstrip
p/n: 70-4897-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Window Lift Sash Channel Weatherstrip
p/n: 20-3069-60
This Window Lift Sash Channel Weatherstrip is designed from the original part for superior fitment and seal. Thirty-six (36) inch long roll. One (1) roll required per window.
Window Lift Sash Channel Weatherstrip
p/n: 20-1909-62
This Window Lift Sash Channel is designed from the original part for superior fitment and function. Thirty-four and three-fourths (34-3/4") inch long EPDM rubber extrusion that goes between glass and metal sash lift channel. One (1) roll required per window.
Lower Door Weatherstrip - LH or RH
p/n: 70-5336-73
This Lower Door Weatherstrip attaches to the bottom of the driver's (LH) or passenger's (RH) side door. This reproduction weatherstrip pair is designed from the original part for an authentic fit, finish and appearance.
Front Door Vent Window Post Weatherstrips
p/n: 20-2782-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Lower Door Foot Weatherstrips
p/n: 20-1650-73
This Lower Door Foot Weatherstrip pair is designed from the original part for superior fitment and seal. Left and Right door weatherstrips that fit to the lower back corner (foot) of the door.
Radiator Support To Hood Weatherstrip
p/n: 20-0120-31
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the hood and radiator support.
Air Deflector Shield To Hood Weatherstrips
p/n: 20-0498-42
This Air Deflector Shield To Hood Weatherstrip pair is designed from the original part for superior fitment and seal. This rubber weatherstrip pair attaches to the upper grille air deflector shield. • may need trimming
Ball End Hook Tool
p/n: 94-0101-94
Steele Rubber Products offers the best quality installation tools. This Ball End Hook Tool assists greatly in the installation of window rubber on classic collector vehicles.
Sunroof Glass Storage Weatherstrips - On Body
p/n: 70-5212-45
A pair of custom Sunroof Glass Storage Weatherstrips to protect the sunroof glass when it’s removed and stored under the hood. These weatherstrips mount to the body with Peel-N-Stick adhesive backing.
Sunroof Glass Storage Weatherstrips - Under Hood
p/n: 70-5211-45
A pair of custom Sunroof Glass Storage Weatherstrips to protect the sunroof glass when it’s removed and stored under the hood. These weatherstrips mount to the hood with Peel-N-Stick adhesive backing.
Rear Door Vertical Weatherstrip
p/n: 70-4899-73
This Rear Side Door Vertical Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip attaches on to the rear vertical section of the rear door with peel-n-stick tape. It fits either the Left or Right Rear door on Quad Cab Pickups.
T-Top Trim Panel to Latch Handle Seals
p/n: 20-2806-67
This T-Top Trim Panel to Latch Handle Seal pair is designed from the original part for superior fitment and seal. These seals glue onto the plastic trim panel where latch handle goes through the panel.
Vent Window Division Post Weatherstrip
p/n: 70-0040-56
This Vent Window Division Post Weatherstrip is an extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.
Firewall To Hood Weatherstrip
p/n: 20-2750-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Firewall To Hood Weatherstrip
p/n: 20-2749-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body. Includes attaching clips pre-installed.
Top Of Door Weatherstrips
p/n: 20-2110-73
This Top of Door Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips mount (glue-on) directly to the vehicle body to seal the doors when closed.
Vent Window Frame Seal
p/n: 20-1112-56
This is the Vent Window Frame Seal for the outer edge of vent window frame to front door. This special thin strip glues (adhesive is not included) on vent window frame and stops water from leaking between the vent window frame and the front door.
Door Glass Channel Filler Weatherstrip
p/n: 20-2091-62
This Door Glass Channel Filler Weatherstrip is designed from the original part for superior fitment and seal. This door glass to body filler seal fits in the metal channel that holds the glass piece. Sold in a 36-inch strip.
Door Panel Clip Tool
p/n: 94-0017-94
Steele Rubber Products offers the best quality installation tools. This Door Panel Clip Tool provides a quick an easy way to remove door panel clips without causing damage to the trim pad on classic collector vehicles.
Mini Hook Tool Set
p/n: 94-0068-94
Steele Rubber Products offers the best quality installation tools. This Mini Hook Tool Set offers four (4) different configurations to help you get under and pry up the smallest object.
Cowl End Weatherstrips
p/n: 70-4917-43
This Cowl End Weatherstrip pair is designed from the original part for superior fitment and function. Die cut from correct sponge rubber.
Windshield Wiper Arm Remover Tool
p/n: 94-6575-94
This Windshield Wiper Arm Remover Tool easily removes wiper arms without damage to the vehicle finish.
Wiper Cowl Weatherstrips
p/n: 70-4882-43
This Wiper Cowl Weatherstrip pair is designed from the original part for superior fitment and seal. This is the rear outer wiper cowl pair. These weatherstrips sit behind the hood to cowl primary weatherstrip by the left-side and right-side hood hinges.
Front Fender To Cowl Pads
p/n: 20-1866-45
This Front Fender Pad pair is designed from the original part for superior fitment and seal. These weatherstrip pads fit at the top rear of the front fender to cowl panel.
Pillar Seal - Fender To Cowl
p/n: 20-0689-45
This reproduction Pillar Seal - Fender To Cowl is designed from the original part for an authentic fit, finish and appearance. The weatherstrips installs between fender and cab.
Radiator Shroud Hood Weatherstrip
p/n: 20-0445-42
This Radiator Shroud Hood Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits to the lower center of the radiator shroud.