Search Results

49 items found matching 1929 Cadillac LaSalle 328 2 door Roadster
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Motor Mount

p/n: 70-0300-11

Motor mount. Intermediate motor mount for support bolts. Split in half if needed at installation. Four (4) piece set.

$293.40/set
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$169.70/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Axle rebound pad

p/n: 70-1132-32

Pads, front axle rebound.Width: 2.75 inches.

$139.50/pr.
Made to Order Takes 1-2 Days
Convertible top rest block

p/n: 70-0069-67

Pads, convertible top rest for rear deck. Two heights as original for inner and outer positions. Four (4) piece set.Length: 2.0625 inches.

$139.50/set
Made to Order Takes 1-2 Days
Axle rebound pad

p/n: 70-0239-32

Pads, rear axle rebound.

$119.10/pr.
In Stock
Hood bumper

p/n: 70-0013-42

Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.

$116.60/set
In Stock
LaSalle monogram pedal pad

p/n: 70-0037-22

LaSalle pedal pads, clutch and brake, excellent copy from authentic original with LaSalle monogram.

$95.70/pr.
In Stock
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$84.70/pr.
In Stock
LaSalle monogram

p/n: 70-0056-49

LaSalle monograms for center of runningboard matting, exact copy, to be in-laid.

$83.90/pr.
In Stock
Side mount spare wheel grommet

p/n: 70-0128-37

Grommets, sidemount brace rod, good copy.Height: 1.375 inches.

$81.70/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Rear Window Gasket

p/n: 70-0018-83

This rear window gasket weatherstrip comes in a seven foot, three inch (7' 3") strip and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.

$62.50/ea.
In Stock
Body mounting pad

p/n: 70-0299-48

Pad, body mounting, for body bracket. Two (2) collars and retaining rings. Four (4) per car.

$43.80/ea.
In Stock
Starter pedal pad

p/n: 70-1182-18

Pad, starter pedal. Original pattern. Round style.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$41.70/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Body mounting pad

p/n: 70-0297-48

Pad, body mounting. Three eighths (3/8) inch by two (2) inch by three (3) inch with collar and retainer ring.

$34.10/ea.
In Stock
Hood latch swivel

p/n: 70-0061-42

Swivel, hood latch. Exact copy from .075 steel, pierced for rivets, not plated.

$26.80/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Brake shaft stop bumper

p/n: 70-0271-24

Bumper, brake rocker shaft lever stop. Two (2) used per car. Also used as door side bumper for some 1927-31 Cadillacs.

$16.90/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$15.40/ea.
In Stock
Door bumper

p/n: 70-1154-71

Pad, door jamb, rear door fender cut out. One and one half (1-1/2) inch outside diameter, seven eighths (7/8) inch plug.

$14.20/ea.
In Stock
Door bumper

p/n: 70-1157-71

Pad, door jamb (door side bumper).Some bodies using escutcheons around pads.Length: 1.5625 inches. Width: 1.1875 inches.

$11.80/ea.
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Door bumper

p/n: 70-1155-71

Pad, door jamb (door side bumper).Length: 1.25 inches. Width: .9375 inches.

$9.40/ea.
In Stock
Door bumper

p/n: 70-1160-71

Pad, door jamb (door side bumper).Length: 1.1875 inches.

$9.10/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Headlight stanchion pad

p/n: 70-0323-14

Pad, for base of headlight stanchion tube.

$7.60/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Universal Mounting Pad

p/n: 70-0019-52

Pad, universal mounting, two and one eighths (2-1/8) inches wide. Heavy rubbery pad with half round (3/16) inch bead for windshield frame mounting to cowl on open cars. Black rubber.

$6.30/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Hood latch swivel pad

p/n: 34-0408-42

Pad, hood latch swivel for hood latch pressure against hood corners. For screw or rivet.

$4.50/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.20/ft.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.00/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0133-21

Special grommet with wide spacing for frame metal, to pass electrical wiring and cables through frame. Sheet Metal Hole: 31/32" Center Hole: 3/4" Outside Diameter: 1-3/16" Slot Width: 3/16"

$3.90/ea.
In Stock
Windshield weatherstrip

p/n: 70-1163-52

Weatherstrip, T-rubber, one (1) inch long with one quarter (1/4) inch top. Numerous applications for windshields.Width: 1.0 inches.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 70-0142-52

Weatherstrip, T-rubber, windshield. Three fourth (3/4) inch size, top width is approximately one fourth (1/4) inch.Width: .75 inches.

$3.49/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock