Running Board Matting
p/n: 70-0420-49
Running board matting. Fully molded rubber strips with full length steel cores molded in.
Running Board Matting
p/n: 11-0003-49
Edge panel, running board. Exact copy including 1/4 inch mounting studs. A perfect replica in highest quality material. 43-1/2 inch long.
Spring Mount Cushion Set
p/n: 40-0070-32
This Spring Mount Cushion set is for Goodyear type spring mounts. This set is for both front and rear springs.
Front spring mounting block
p/n: 11-0015-33
Shock insulator or mounting block, front spring, both ends. Four (4) piece set.
Spring Mount Cushion Set
p/n: 15-0009-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. Set is for both front and rear of all four springs.
Spring Mount Cushion Set
p/n: 15-0008-35
This eight (8) piece Spring Mount Cushion set is made to OEM specifications to install for an authentic fit, finish and function. A "silent block" type spring mount cushion set.
Engine Mount Cushions
p/n: 70-0300-11
These Engine Mount Cushions are used as an intermediate engine mount for support bolts. Split in half if needed at installation. A four (4) piece set.
Brake and clutch pedal pad
p/n: 11-0023-22
Pedal pad, clutch and brake. Original pattern, superior workmanship.
Steering Column Floorplate
p/n: 11-0004-36
Floor plate, steering column and pedal. Brass core as original, fully detailed.
Carpet heel plate
p/n: 11-0009-88
Heel plate, carpet. Steel core and tabs, tread pattern matching other parts.
Rear Engine Support Pad
p/n: 70-0443-11
This Rear Engine Support Pad is used as a cushion at transmission. Makes a four (4) piece set after splitting.
Distributor boot
p/n: 70-0004-21
Boot, distributor dust and moisture. Original equipment, exact copy. V-16 only.
Rear Axle Bumpers - Revulcanization
p/n: 11-0030-35
This Rear Axle Bumpers - Revulcanization is designed to restore your original rubber bumper pads to a like new condition. Service requires your metal cores. Please call or email for more service details and ordering. Revulcanization service only.
Door Check Strap
p/n: 40-0536-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing, molded-in steel shank and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Gearshift Floorplate
p/n: 40-0146-88
Floorplate, gearshift and handbrake. Perfect reproduction, including brass core.Length: 8.0 inches. Width: 7.25 inches.
Steering Column Floorplate
p/n: 40-0152-88
Floorplate, steering column and pedals. Perfect detail with brass core. (Similar to our #40-0145-88, compare sketches with your original to match).
Steering Column Floorplate
p/n: 17-0004-36
Floorplate, steering column and pedal, black rubber only, close original detail.Width: 11.75 inches. Height: 7.75 inches.
Front Spring Bumper Service
p/n: 15-0006-35
Bumper, front spring to frame. Revulcanization service only.Width: 4.625 inches.
Windshield Weatherstrip Channel
p/n: 17-0032-52
This Windshield Weatherstrip Channel seals the windshield glass to body and protects interior of vehicle. Made from original parts to ensure great fit and easy installation.
Steering Column Floorplate
p/n: 40-0268-88
Floorplate for steering column and pedals. Original tread pattern. Customer may have to adapt existing fastening holes to their car.Length: 8.875 inches.
Steering Column Floorplate
p/n: 40-0145-88
Floorplate, steering column and pedals. Floorplate, steering column and pedals. Exquisite detail, brass core.This is a copy from Plymouth Model U.
Engine Mount Cushion Set
p/n: 25-0038-11
This four (4) piece Engine Mount Cushion Set is molded from a high-quality EPDM dense rubber. Designed from an original part for an exact reproduction.
Hood Hinge Top Strap Pivot
p/n: 70-0045-42
A Hood Hinge Top Strap Pivot manufactured to OEM specifications to install for an authentic fit and finish. Cold rolled steel as original.
Door Check Strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Handbrake Floorplate
p/n: 11-0005-24
Floor plate, handbrake lever. Brass core as original, fully detailed.
Front Engine Cushion Set
p/n: 25-0037-11
This four (4) piece Front Engine Cushion Set is molded from a high-quality EPDM dense rubber. Designed from an original part for an exact reproduction.
Muffler Bypass Floor Plate
p/n: 11-0006-88
Floor plate, muffler bypass control. Brass core as original, fully detailed.
Windshield Weatherstrip Seal Set
p/n: 70-0015-52
This Windshield Weatherstrip Seal Set includes two (2) 15" Single-Flap side weatherstrip seals and one (1) 45" Double-Flat bottom weatherstrip seal. The set seals the windshield glass to the body and protects the interior of vehicle.
Gearshift Floorplate
p/n: 40-0362-88
Draft pad or plate, gearshift and handbrake. Brass core as original.Length: 10.25 inches. Width: 7.0 inches.
Engine Mount Pad Set
p/n: 50-0266-11
This Engine Mount Pad Set is made of a special soft grade rubber, as original. Four (4) piece set.
Ferrule Installing Tool
p/n: 70-0662-69
Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.
Convertible Top Rest Block
p/n: 70-0069-67
Pads, convertible top rest for rear deck. Two heights as original for inner and outer positions. Four (4) piece set.
Brake and Clutch Pedal Pads
p/n: 25-0027-22
Pads, brake and clutch pedals.Length: 3.875 inches. Width: 2.875 inches.
Vacuum Clutch / Brake Cylinder Diaphragm
p/n: 50-0063-24
This Electromatic Clutch Control or Brake Vacuum Cylinder Diaphragm is designed from the original part for superior fitment and function. Used in different locations dependent upon vehicle make.
Rumble Seat Step Pad
p/n: 11-0012-87
Cover, rumble seat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Accelerator Pedal Pad
p/n: 15-0007-40
Pad, accelerator, slipover type for metal pedal, exact copy.Length: 9.4375 inches. Width: 2.50 inches.
Axle Rebound Pad
p/n: 15-0003-35
Bumper, frame to axle, rear, with steel core as original.Width: 3.0 inches.
Rigid Run Channel
p/n: 70-0130-58
Special channel, felt lined rubber, for door upper front post for convertibles with cast upper post. Each piece sixteen (16) inches long.
Windshield Weatherstrip Set
p/n: 70-0016-52
This three (3) piece Windshield Weatherstrip Set includes two 16-1/2" side weatherstrip channels and one 48" bottom weatherstrip channel. All corners are correctly molded to fit perfectly.
Brake and clutch pedal pad
p/n: 11-0008-22
Pad, brake and clutch pedal. Perfect copy of original, superior material and workmanship.
Hood bumper
p/n: 70-0013-42
Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.
Axle Rebound Pad
p/n: 40-0373-32
Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.
Windshield Weatherstrip Set
p/n: 70-0097-52
This Windshield Weatherstrip Set seals the windshield glass to the body and protects the interior of the vehicle. Fully molded rubber channel for installing front window glass. All corners are correctly molded to fit perfectly.