Due to COVID related supply chain issues and a high volume of orders, please expect some processing and shipping delays. Thank you for your patience.

Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

84 items found matching 1930 Cadillac 452A 4 door Landau Sedan Cabriolet - 5 Passenger
Running Board Matting

p/n: 70-0420-49

Running board matting. Fully molded rubber strips with full length steel cores molded in.

$1,698.99/set
Made to Order Takes 5-7 Days
Motor Mount

p/n: 70-0300-11

Motor mount. Intermediate motor mount for support bolts. Split in half if needed at installation. Four (4) piece set.

$314.79/set
In Stock
Fluted radiator hose

p/n: 70-0001-31

Radiator hoses, fluted style. V-12, V-16.

$239.39/pr.
Made to Order Takes 5-7 Days
Motor Mount

p/n: 70-0443-11

Rear motor support pad at transmission. Four (4) piece set after splitting.

$237.59/set
Made to Order Takes 5-7 Days
Distributor boot

p/n: 70-0004-21

Boot, distributor dust and moisture. Original equipment, exact copy. V-16 only.

$230.49/ea.
Made to Order Takes 5-7 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$185.69/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$154.59/ea.
In Stock
Convertible top rest block

p/n: 70-0069-67

Pads, convertible top rest for rear deck. Two heights as original for inner and outer positions. Four (4) piece set.Length: 2.0625 inches.

$152.69/set
Made to Order Takes 5-7 Days
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$146.99/ea.
In Stock
Axle rebound pad

p/n: 70-0023-32

Pads, rear axle rebound.

$146.89/pr.
Made to Order Takes 5-7 Days
Axle rebound pad

p/n: 70-1133-32

Pads, front axle rebound.

$140.89/pr.
Made to Order Takes 5-7 Days
Hood bumper

p/n: 70-0013-42

Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.

$127.69/set
In Stock
Front apron crossbar grommet

p/n: 70-1131-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.5 inches.

$117.29/pr.
Made to Order Takes 5-7 Days
Body mounting pad

p/n: 70-0298-48

Pads, body mounting for front bracket, right and left. Three eighths (3/8) inch by two and three fourths (2-3/4) inch by four (4) inches with two (2) collars and retaining rings. Two (2) required per car.

$113.99/pr.
Made to Order Takes 5-7 Days
Vacuum Brake Cylinder Rod Boot

p/n: 70-0010-24

This Vacuum Brake Cylinder Rod Boot is designed from the original part for superior fitment and seal. Made from durable rubber to original configuration.

$113.39/ea.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$104.39/pr.
In Stock
Motor mount pad

p/n: 70-1162-11

Pads, front motor mounting. For Cadillac V-8 see our #70-1161-11.

$104.39/pr.
Made to Order Takes 5-7 Days
Firewall Grommet Set

p/n: 70-1149-21

This Firewall Grommet Set contains six (6) pieces that are intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Designed from the original part for superior fit and seal.

$103.89/set
Made to Order Takes 5-7 Days
Side Mount Spare Grommet Set

p/n: 70-1136-37

This six (6) piece Side Mount Spare Grommet Set is made from top-quality EPDM rubber and designed from the original parts for durability and proper function. This set can be used for various applications to support arms, brace rods, and cowl standoff posts.

$100.99/set
Made to Order Takes 5-7 Days
Front bumper grommet

p/n: 70-0103-28

Grommets, front bumper. Theses are for the round, tubular bumper support.

$99.39/pr.
Made to Order Takes 5-7 Days
Hood Ventilator Bumper Set

p/n: 70-0011-42

This forty (40) piece Hood Ventilator Bumper set is designed from the original parts for superior fitment and function. The set includes bumpers and rivets for one (1) hood.

$99.39/set
Made to Order Takes 5-7 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$85.39/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$85.39/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$85.39/ea.
In Stock
Radiator brace filler strip

p/n: 70-0020-31

Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.

$80.39/pr.
In Stock
Steering column grommet

p/n: 70-0007-36

Grommet, steering column at floor.

$69.99/ea.
Made to Order Takes 5-7 Days
Vacuum brake rod cover seal

p/n: 70-0327-24

Cover seal, vacuum brake valve operating rod.

$69.99/ea.
In Stock
Spare tire bumper

p/n: 70-0025-37

Pad, spare wheel standoff post at cowl.

$68.99/pr.
Made to Order Takes 5-7 Days
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$57.79/ea.
Made to Order Takes 5-7 Days
Headlight stanchion pad

p/n: 70-0255-21

Mounting pads, horn and headlight stanchion base to hood latch shelf. Two and one half (2-1/2) inches by four and one fourth (4-1/4) inches.Length: 4.

$56.89/pr.
Made to Order Takes 5-7 Days
Taillight gasket

p/n: 70-0258-15

Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.

$56.89/pr.
Made to Order Takes 5-7 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$54.59/ea.
In Stock
Body mounting pad

p/n: 70-0299-48

Pad, body mounting, for body bracket. Two (2) collars and retaining rings. Four (4) per car.

$52.39/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$51.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$51.99/ea.
In Stock
Starter pedal pad

p/n: 70-1182-18

Pad, starter pedal. Original pattern. Round style.

$51.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$49.99/ea.
In Stock
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$49.69/pr.
Made to Order Takes 5-7 Days
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$46.89/ea.
In Stock
Headlight badge bar bushing

p/n: 70-0115-14

Bushing, headlight to badge bar.

$44.69/pr.
In Stock
Luggage rack pad

p/n: 70-0107-46

Pad, luggage rack to rear apron.

$41.59/pr.
In Stock
Body mounting pad

p/n: 70-0297-48

Pad, body mounting. Three eighths (3/8) inch by two (2) inch by three (3) inch with collar and retainer ring.

$40.89/ea.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$39.19/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Brake shaft stop bumper

p/n: 70-0271-24

Bumper, brake rocker shaft lever stop. Two (2) used per car. Also used as door side bumper for some 1927-31 Cadillacs.

$20.49/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$18.59/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$18.59/ea.
In Stock
Door bumper

p/n: 70-1154-71

Pad, door jamb, rear door fender cut out. One and one half (1-1/2) inch outside diameter, seven eighths (7/8) inch plug.

$17.19/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$16.59/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$15.49/ea.
In Stock