Search Results
Please click on the part name in red in order to get a complete description.
Runningboard matting
p/n: 70-0420-49
Runningboard matting. Fully molded rubber strips with full length steel cores molded in.
Runningboard matting
p/n: 11-0003-49
Edge panel, runningboard. Exact copy including 1/4 inch mounting studs. A perfect replica in highest quality material. 43-1/2 inch long.
Vibration damper service
p/n: 30-0376-12
Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.
Front spring mounting block
p/n: 11-0015-33
Shock insulator or mounting block, front spring, both ends. Four (4) piece set.
Motor mount service
p/n: 11-0018-11
Motor Mount, Revulcanization service only. NOTE: This is a difficult disassembly job requiring removal of rivets and re-riveting after revulcanization.
Motor Mount
p/n: 70-0300-11
Motor mount. Intermediate motor mount for support bolts. Split in half if needed at installation. Four (4) piece set.
Brake and clutch pedal pad
p/n: 11-0023-22
Pedal pad, clutch and brake. Original pattern, superior workmanship.
Steering column floorplate
p/n: 11-0004-36
Floor plate, steering column and pedal. Brass core as original, fully detailed.
Carpet heel plate
p/n: 11-0009-88
Heel plate, carpet. Steel core and tabs, tread pattern matching other parts.
Motor Mount
p/n: 70-0443-11
Rear motor support pad at transmission. Four (4) piece set after splitting.
Distributor boot
p/n: 70-0004-21
Boot, distributor dust and moisture. Original equipment, exact copy. V-16 only.
Gearshift floorplate
p/n: 40-0137-88
Floorplate, gearshift and handbrake cover. Steel core as original, with exact rubber pattern.Length: 13.125 inches. Width: 10.875 inches.
Gearshift floorplate
p/n: 40-0156-88
Floorplate, gearshift and handbrake. Hole cover, grass core as original.Length: 12.50 inches. Width: 9.0 inches.
Gearshift floorplate
p/n: 40-0017-88
Floorplate, gearshift and handbrake. Full metal insert as original.Length: 13.125 inches.
Accelerator pedal pad
p/n: 40-0014-40
Accelerator pedal. Perfect copy in every detail, including heavy two (2) piece metal core with mounting tabs as original.Length: 10.3125 inches.
Door check strap
p/n: 40-0536-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing, molded-in steel shank and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Gearshift floorplate
p/n: 17-0005-24
Floorplate, gearshift and handbrake, black rubber only.Length: 10.625 inches. Width: 8.875 inches.
Steering column floorplate
p/n: 40-0152-88
Floorplate, steering column and pedals. Perfect detail with brass core. (Similar to our #40-0145-88, compare sketches with your original to match).
Steering column floorplate
p/n: 17-0004-36
Floorplate, steering column and pedal, black rubber only, close original detail.Width: 11.75 inches. Height: 7.75 inches.
Windshield Weatherstrip Channel
p/n: 17-0032-52
12 (twelve) foot strip of windshield weatherstrip channel. Seals windshield glass to body and protects interior of vehicle.
Motor Mount
p/n: 70-0442-11
Rear motor mount support pad at transmission. Four (4) piece set after splitting. V-8 and V-12
Front bow weatherstrip
p/n: 70-0137-64
Weatherstrip, front bow-to-windshield, soft rubber, hollow body, proper screw holes, hinged flaps front and back.
Hood hinge top strap pivot
p/n: 70-0045-42
Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.
Door check strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Handbrake floorplate
p/n: 11-0005-24
Floor plate, handbrake lever. Brass core as original, fully detailed.
Gearshift floorplate
p/n: 40-0058-88
Floorplate, gearshift and handbrake. Fine detail, metal core as original.Length: 8.125 inches.
Muffler bypass floor plate
p/n: 11-0006-88
Floor plate, muffler bypass control. Brass core as original, fully detailed.
Windshield Weatherstrip Seal Set
p/n: 70-0015-52
Three piece set includes two 15" Single-Flap side weatherstrip seals and one 45" Double-Flap bottom weatherstrip seal. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly. Exact reproducti
Side roof rail weatherstrip
p/n: 14-0001-80
Fifteen (15) foot strip for convertible side window fits aluminum retainer channel.Length: 180.0 inches. Width: .9375 inches.
Ferrule installing tool
p/n: 70-0662-69
Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.
Hinge Pillar Weatherstrip
p/n: 70-0734-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Front apron crossbar grommet
p/n: 17-0002-45
Grommets, front apron crossbar, right and left. Top quality material and detail.
Vacuum cylinder diaphram
p/n: 50-0063-24
Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.
Rumbleseat step pad
p/n: 11-0012-87
Cover, rumbleseat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Rigid run channel
p/n: 70-0130-58
Special channel, felt lined rubber, for door upper front post for convertibles with cast upper post. Each piece sixteen (16) inches long.Length: 16.
Shock and stabilizer seal
p/n: 70-1185-33
Seals, shock absorber and rear stabilizer link. Eight (8) piece set.
Windshield Weatherstrip Seal Set
p/n: 70-0016-52
Three piece set includes two 16-1/2" side weatherstrip channels and one 48" bottom weatherstrip channel. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly. Exact reproduction of original
Brake and clutch pedal pad
p/n: 11-0008-22
Pad, brake and clutch pedal. Perfect copy of original, superior material and workmanship.
Hood bumper
p/n: 70-0013-42
Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.
Axle rebound pad
p/n: 40-0373-32
Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.
Headlight bar grommet
p/n: 11-0002-14
Grommet, headlight bar-to-radiator shell. Includes clearance groove, faithful detail. 1-1/8 inch inside diameter.
Side mount spare grommet kit
p/n: 70-1135-37
Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts. Six (6) piece set.
Firewall Grommet
p/n: 17-0044-20
Grommet or plug, firewall pass through for six (6) wires or cables. Eight (8) cylinder models only. For twelve (12) cylinder see our #17-0045-20.
Front apron crossbar grommet
p/n: 70-1131-45
Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.5 inches.
Steering Column Grommet
p/n: 30-0046-36
Steering column to toe board grommet. Made with a brass core, like original. For one and one half (1-1/2) inch steering column tube.
Front apron crossbar grommet
p/n: 70-1130-45
Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.
Axle rebound pad
p/n: 30-0054-32
Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.
Firewall grommet
p/n: 17-0045-20
Grommet or plug, firewall pass through for eight (8) wires or cables. Twelve (12) cylinder models only. For eight (8) cylinder see our #17-0044-20.
Body mounting pad
p/n: 70-0298-48
Pads, body mounting for front bracket, right and left. Three eighths (3/8) inch by two and three fourths (2-3/4) inch by four (4) inches with two (2) collars and retaining rings. Two (2) required per car.
Vacuum brake cylinder boot
p/n: 70-0010-24
Boot, vacuum brake cylinder. Made from durable rubber to original configuration.
Axle rebound pad
p/n: 30-0043-32
Pads, front axle rebound. Correct shape and design like original.Length: 3.625 inches. Width: 2.125 inches. Height: 2.125 inches.
Axle rebound pad
p/n: 10-0003-35
Pad, rear axle rebound, perfect duplication. Length: 4.0 inches. Height: 1.25 inches.
Firewall grommet
p/n: 70-1148-21
Grommet set, firewall, intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Six (6) piece set.
Fender to radiator seal
p/n: 40-0085-44
Anti-squeak or welt radiator shell to fender.Length: 11.25 inches.
Side mount spare grommet kit
p/n: 70-1134-37
Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts. Six (6) piece set.
LaSalle monogram pedal pad
p/n: 70-0037-22
LaSalle pedal pads, clutch and brake, excellent copy from authentic original with LaSalle monogram.
Axle rebound pad
p/n: 10-0002-35
Pad, front axle rebound, including bolt hole. Excellent copy, highest grade material.Width: 2.25 inches. Height: 1.50 inches.
Accelerator pedal service
p/n: 27-0049-40
Pedal pad, accelerator. Revulcanization service only.Length: 9.0625 inches.
Convertible top arm pad
p/n: 30-0065-67
Pads, folding top swinging arms, right and left, dovetail cross section.Length: 3.50 inches. Width: 1.6875 inches.
Front bow weatherstrip
p/n: 30-0066-67
Pad, folding top, front frame to windshield. Five sixteenths (5/16) inch by one half (1/2) inch rectangular section, fifty (50) inches long.Length: 50.
Cadillac Motors pedal pad
p/n: 70-0076-22
Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.
Firewall grommet kit
p/n: 70-1149-21
Grommets, firewall, intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Six (6) piece set.
Shock and stabilizer seal
p/n: 70-1184-33
Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.
Side mount spare grommet kit
p/n: 70-1136-37
Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts. Six (6) piece set.
Firewall Grommet Set
p/n: 70-1147-21
Grommet set, firewall, intended for spark and choke rods, fuel line, oil gauge line and radiator brace rods. Six (6) piece set.
Hood ventilator bumper kit
p/n: 70-0011-42
Pad set, hood vent door open limit. Set of twenty (20) pads for one (1) hood, including split rivets for installing.
Motor mount pad
p/n: 70-1161-11
Pads, front motor mounting. For cars with round cone-type front mounts. For Cadillac V-12 and V-16 see our #70-1162-11.
Luggage rack grommet
p/n: 17-0021-46
Grommet, luggage rack support arm through body.Length: 2.25 inches. Width: 1.25 inches.
Cadillac V-8 pedal pad
p/n: 70-0148-22
Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.
Rumbleseat step pad
p/n: 40-0124-44
Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
LaSalle monogram
p/n: 70-0056-49
LaSalle monograms for center of runningboard matting, exact copy, to be in-laid.
Headlight grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Shock absorber arm seal
p/n: 40-0081-32
Dust seal set, shock absorber link, rubber only. Eight (8) piece set.
Front spring bumper
p/n: 50-0238-35
Bumpers, front spring, Two (2) per car.Width: 2.0 inches. Height: 1.75 inches.
Rumbleseat step pad
p/n: 40-0012-44
Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.
Starter pedal pad
p/n: 40-0158-21
Pad, starter pedal. Rectangular outline, curved as original to fit oval steel pedal core, proper tread pattern to match other pedals.
Brake and clutch pedal pad
p/n: 40-0072-22
Pad, brake and clutch pedal.Length: 3.9375 inches. Width: 2.9375 inches.
Fender Welting 1/4" Bead 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.
Fender welting 3/16 bead 50ft
p/n: 70-1100-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Fender welting 50ft chrome
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Windshield stanchion base pad
p/n: 40-0244-52
Mounting pad. Windshield post in open cars. 6 cylinder
Side mount spare wheel grommet
p/n: 60-0002-37
Grommet, sidemount wheel carrier brace support-at-cowl panel. Heavy brass core, flexible neck, close copy of original.