Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

77 items found matching 1932 Cadillac 452B 4 door Phaeton
Fluted radiator hose

p/n: 70-0001-31

Radiator hoses, fluted style. V-12, V-16.

$232.29/pr.
Made to Order Takes 1-2 Days
Motor mount pad

p/n: 70-0742-11

Pad, motor support, rear, at transmission. Four (4) piece set.Height: 1.1875 inches.

$198.69/set
Made to Order Takes 2-3 Days
Front bow weatherstrip

p/n: 70-0137-64

Weatherstrip, front bow-to-windshield, soft rubber, hollow body, proper screw holes, hinged flaps front and back.

$180.29/ea.
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$180.19/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.99/ea.
In Stock
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$142.59/ea.
Made to Order Takes 1-2 Days
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$131.89/set
Made to Order Takes 1-2 Days
Steering column floorplate

p/n: 70-0263-88

Floorplate, steering column and pedals, fully detailed.Length: 5.5 inches. Width: 6.625 inches.

$128.59/ea.
Made to Order Takes 1-2 Days
Hood bumper

p/n: 70-0013-42

Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.

$123.89/set
In Stock
Vacuum brake cylinder boot

p/n: 70-0010-24

Boot, vacuum brake cylinder. Made from durable rubber to original configuration.

$109.99/ea.
In Stock
Brake cable boot

p/n: 70-0067-24

Boot, brake cable at wheel, front and rear.Length: 4.0 inches.

$101.39/pr.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$101.29/pr.
In Stock
Motor mount pad

p/n: 70-1162-11

Pads, front motor mounting. For Cadillac V-8 see our #70-1161-11.

$101.29/pr.
In Stock
Taillight mounting pad

p/n: 70-0216-15

Pads, taillight bracket to fender mounting.Length: 5.75 inches.

$100.99/pr.
Made to Order Takes 1-2 Days
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$99.89/set
In Stock
Side mount spare grommet kit

p/n: 70-1137-37

Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts.

$98.79/set
Made to Order Takes 4 Days
Gearshift floorplate

p/n: 70-0234-88

Floorplate, gearshift and handbrake, with metal insert.

$98.19/ea.
Made to Order Takes 2-3 Days
Convertible post bumper

p/n: 70-0386-67

Pads, folding post bottom, fully molded with brass core. Three sixteenths (3/16) inch by one (1) inch by two and one half (2-1/2) inches.

$85.99/pr.
Made to Order Takes 2-3 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$82.79/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$82.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$82.79/ea.
In Stock
Radiator brace filler strip

p/n: 70-0020-31

Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.

$77.99/pr.
In Stock
Vacuum brake rod cover seal

p/n: 70-0327-24

Cover seal, vacuum brake valve operating rod.

$67.99/ea.
Made to Order Takes 1-2 Days
Hood corner pad

p/n: 50-0036-42

Pads, hood corners, front. Original type with metal core and retaining tab.Width: 1.625 inches.

$67.69/pr.
In Stock
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$55.99/ea.
Made to Order Takes 1-2 Days
Headlight mounting pad

p/n: 70-0256-21

Mounting pad, horn and headlight brace rod to fender. One and one half (1-1/2) inches by three and one eighth (3-1/8) inches outside diameter.

$55.19/pr.
In Stock
Taillight gasket

p/n: 70-0258-15

Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.

$55.19/pr.
Made to Order Takes 1-2 Days
Headlight mounting pad

p/n: 70-0257-14

Mounting pads, horn and headlight stanchion. Two and one half (2-1/2) inches by five (5) inches outside diameter.Length: 5.0 inches. Width: 2.5 inches.

$54.99/pr.
Made to Order Takes 1-2 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$52.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$50.39/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$50.39/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$48.49/ea.
In Stock
Fender light pad

p/n: 70-0692-16

Gasket, fender light.Length: 4.5625 inches.

$48.19/pr.
Made to Order Takes 2-3 Days
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$48.19/pr.
In Stock
Headlight grommet

p/n: 70-0254-14

Grommets, radiator shell headlight crossbar braceHeight: .3125 inches.

$46.59/pr.
Made to Order Takes 1-2 Days
Starter pedal pad

p/n: 70-1183-18

Pad, starter pedal. Original pattern, rectangular style.Length: 2.0625 inches. Width: 1.625 inches.

$45.99/ea.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Headlight stanchion pad

p/n: 70-0614-14

Pad, headlight stanchion to fender.Length: 3.4375 inches.

$43.39/pr.
Made to Order Takes 1-2 Days
Headlight badge bar bushing

p/n: 70-0115-14

Bushing, headlight to badge bar.

$43.29/pr.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$37.99/ea.
In Stock
Horn trumpet grommet

p/n: 70-1199-21

Grommets, horn trumpet mounting. Seven eighths (7/8) inch inside diameter. For the one (1) inch inside diameter see our #70-1200-21.

$34.99/pr.
Made to Order Takes 1-2 Days
Horn trumpet grommet

p/n: 70-1200-21

Grommets, horn trumpet mounting. One (1) inch inside diameter, 1-3/8 inch outside diameter, 9/16 inch high.

$31.69/pr.
In Stock
Body bolt cushion

p/n: 70-0265-48

Cushion for body bolts, for use in metal cups. Fully molded rubber. One and one half inch (1 1/2") outside diameter by seven sixteenths inch (7/16') inside hole diameter by one and one fourth inch (1 1/4") height.

$22.19/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$17.99/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$17.99/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$15.99/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$14.99/ea.
In Stock
Door bumper

p/n: 70-1158-71

Pad, door jamb, (door side bumper).Length: 1.25 inches. Width: 1.125 inches.

$12.89/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$11.49/ea.
In Stock