Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

65 items found matching 1932 Chevrolet Confederate 2 door Convertible
Motor mount service

p/n: 60-0506-11

Motor Mount, rear support. Revulcanization service only. Send in old steel cores, two (2) pieces each support.Length: 3.375 inches. Width: 2.5 inches.

$189.49/pr.
Call or Email
Front bow weatherstrip

p/n: 70-0137-64

Weatherstrip, front bow-to-windshield, soft rubber, hollow body, proper screw holes, hinged flaps front and back.

$174.99/ea.
Made to Order Takes 1-2 Days
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Transmission mount service

p/n: 60-0504-25

Insulator support, frame to free wheeling unit. Revulcanization service only.

$130.99/ea.
Call or Email
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Side mount spare wheel grommet

p/n: 60-0002-37

Grommet, sidemount wheel carrier brace support-at-cowl panel. Heavy brass core, flexible neck, close copy of original.

$77.29/ea.
In Stock
Rear spring bumper

p/n: 60-0137-32

Bumper, rear spring. Fits original retainer.Width: 2.5625 inches.

$69.19/pr.
In Stock
Windshield weatherstrip

p/n: 70-0078-52

Weatherstrip, lower windshield. Four (4) foot strip.

$67.39/ea.
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$58.69/ea.
In Stock
Windshield Mounting Pad

p/n: 60-0361-52

Pad, windshield side arm-to-cowl.Width: 3.1875 inches.

$52.79/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Bowtie emblem pedal pad

p/n: 60-0043-22

Pads, brake and clutch pedals. One and seven eighths (1-7/8) inch by four (4) inch overall. Excellent detail with bowtie emblem like original.

$46.49/pr.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 60-0191-87

Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$45.19/pr.
In Stock
Brake and clutch shank seal

p/n: 60-0019-24

Seal, brake and clutch pedal shank to floorboard. Single bellows rubber cup, seals air drafts around pedals.

$44.99/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Horn button contact cushion

p/n: 60-0344-21

Cushion, horn blowing button.Height: 1.0 inches.

$36.89/ea.
In Stock
Rumbleseat lid corner pad

p/n: 70-0120-87

Pad, rumbleseat lid corner, Compare with our #60-0191-87.Length: .75 inches.

$36.39/pr.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Brake shaft bushing

p/n: 60-0371-24

Bushing, brake cross shaft bracket.

$34.39/pr.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$31.19/ea.
In Stock
Cowl vent gasket

p/n: 60-0131-54

Gasket, cowl vent. One fourth (1/4) inch by five sixteenths (5/16) inch, for five (5) inch by fifteen (15) inch top cowl vent. Sponge type.Width: 15.

$30.99/ea.
In Stock
Accelerator rod button cover

p/n: 60-0357-40

Cover, accelerator rod button. Round slip-over type. Good copy with bow tie center.Height: .4375 inches.

$28.19/ea.
In Stock
Steering column spacer

p/n: 60-0563-32

Spacer, steering column to dash at U-clamp.Length: 2.50 inches.

$26.49/ea.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$23.89/ea.
In Stock
Door alignment pad

p/n: 70-1821-71

Wedge pads, door aligning.Length: 1.125 inches. Width: .5 inches. Height: .875 inches.

$23.29/pr.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$21.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$16.79/ea.
In Stock
Starter button cover

p/n: 60-0358-21

Cover, starter rod button, round slip over type. One and seven sixteenths (1-7/16) inch outside diameter. Good copy with bow tie center.Height: .

$16.79/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$14.99/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$10.29/ea.
In Stock
Door bumper

p/n: 70-1155-71

Pad, door jamb (door side bumper).Length: 1.25 inches. Width: .9375 inches.

$10.29/ea.
In Stock
1/8" Fabric Hood Lacing

p/n: 60-0578-42

Fabric hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
3/16" Fabric Hood Lacing

p/n: 70-2221-42

Hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$8.59/ea.
In Stock
Handbrake lever anti-rattle

p/n: 60-0531-24

Spacer, anti-rattle, handbrake lever sector rod, between release rod and handbrake lever.Width: .6875 inches. Height: .6875 inches.

$8.49/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$8.39/ea.
In Stock
Hood bumper

p/n: 60-0035-42

Bumper, hood latch bracket.Width: .625 inches. Height: .5625 inches.

$7.99/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.99/ea.
In Stock
Side Roof Rail Weatherstrip

p/n: 70-0060-65

Weatherstrip, side roof rail. Made from dense rubber extrusion. Available by the foot.

$7.89/ft.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.89/ea.
In Stock
Door Handle Grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.69/ea.
In Stock
Leaf spring eye seal

p/n: 27-0059-35

Seal or cover, leaf spring eye or shackle bolt end.

$7.39/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$7.39/ea.
In Stock