Search Results

56 items found matching 1932 Packard Light Eight 2 door Roadster
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Vibration damper service

p/n: 30-0376-12

Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.

$705.30/ea.
Call or Email
Prop shaft support service

p/n: 30-0526-24

Support, drive shaft intermediate bearing retainer. Revulcanization service only.

$610.50/ea.
Call or Email
Motor mount service

p/n: 30-0403-11

Insulator, motor mount support, rear. Revulcanization service only.

$519.40/pr.
Call or Email
Motor mount service

p/n: 30-0509-11

Insulator, rear engine support. Revulcanization service only. Found on an original 900, but different from our #30-0403-11.

$493.50/pr.
Call or Email
Motor mount service

p/n: 30-0508-11

Insulator, front engine support. Revulcanization service only. Found on an original 900, but different from our #30-0402-11.

$469.60/pr.
Call or Email
Motor mount service

p/n: 30-0402-11

Insulator, motor mount support. Front right and left. Revulcanization service only.

$305.20/pr.
Call or Email
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$169.70/ea.
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Windshield weatherstrip

p/n: 30-0256-52

Weatherstrip, cowl to windshield. Glass frame. Three (3) piece set of right and left molded ends plus center section of soft yielding rubber.

$153.70/set
Made to Order Takes 1-2 Days
Headlight mounting pad set

p/n: 30-0236-14

Pad set, headlight mounting. Six (6) piece replacement set. Sold in complete sets only.

$153.50/set
In Stock
Windshield weatherstrip

p/n: 30-0083-52

Pad/Seal, windshield frame, lower. Forty six (46) inches overall.Length: 46.0 inches.

$114.90/ea.
In Stock
Axle rebound pad

p/n: 30-0054-32

Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.

$104.90/pr.
In Stock
Headlight mounting pad

p/n: 30-0291-14

Pads, headlight support bar to fender. Molded right and left.Length: 3.75 inches. Width: 3.75 inches.

$98.70/pr.
In Stock
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.40/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Cowl vent gasket

p/n: 30-0097-54

Gaskets, side cowl vent. One fourth (1/4) inch square cross section.

$72.80/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock
Fuel neck grommet

p/n: 30-0158-41

Grommet, filler neck to body.

$58.90/ea.
In Stock
Radiator mounting pad

p/n: 30-0395-31

Spacer or Pad, radiator anchorage stud, upper stud. One (1) pair required per car.Length: 2.5625 inches.

$52.20/pr.
In Stock
Hood rest pad

p/n: 30-0222-42

Pads, hood inner rest center. Rubber only, fits original bracket.Length: 2.0625 inches. Width: .6875 inches.

$50.00/pr.
In Stock
Cowl vent gasket

p/n: 30-0096-54

Gasket, top cowl vent. Closed cell sponge rubber. One half (1/2) inch by three fourths (3/4) inch. Rectangular cross section.

$49.90/ea.
In Stock
Radiator mounting pad

p/n: 30-0209-31

Shim, radiator core mounting stud spacer. Fully molded rubber. Use as required. Comes as a pair of two (2). Two and seven eighths inch (2 7/8") square by five eighths inch (5/8") inside hole diameter by three eighths inch (3/8") height.

$49.40/pr.
Made to Order Takes 1-2 Days
Front fender center pad

p/n: 30-0237-44

Pad, separator, front fender center joint. Correct shape and form.Length: 3.0 inches. Width: 3.0 inches.

$48.60/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch pedal bumper

p/n: 30-0380-20

Bumper, inclined toe board pedal hole, carried on toe board to meet our #30-0055-24 pedal. dust cover.

$40.40/pr.
In Stock
Headlight stanchion pad

p/n: 30-0240-14

Cushion (rubber washer), front light to radiator shell. One (1) pair required per car.

$38.00/pr.
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 30-0055-24

Seals, brake and clutch pedal shanks, against underside of floorboard.Length: 2.5625 inches. Width: 1.75 inches.

$37.40/pr.
In Stock
Radiator mounting pad

p/n: 30-0451-31

Spacer or Pad, lower radiator anchor stud. Used in conjunction with our #30-0395-31.Height: .3125 inches.

$36.60/pr.
In Stock
Spring eye bushing

p/n: 30-0081-32

Bushing, spring eye leaf, rear of front spring; or front of rear spring.

$33.00/ea.
In Stock
Bowdrill cloth tape

p/n: 70-1175-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or

$32.80/ea.
In Stock
Firewall grommet

p/n: 30-0319-21

Grommet, water temperature coil wire through firewall. Good reproduction of part that always needs replacement when restoring.Height: 1.50 inches.

$31.90/ea.
In Stock
Taillight gasket

p/n: 30-0523-15

Gasket, taillight door. Two (2) strips twelve (12) inches long.Length: 12.0 inches. Width: .25 inches.

$29.70/pr.
In Stock
Spring shackle bushing

p/n: 30-0076-32

Bushing, spring shackle, front spring, front end; or rear spring, rear end. Two and one eighth (2-1/8) inch long. Sixteen (16) required per car.

$23.40/ea.
In Stock
Door bumper

p/n: 30-0152-71

Bumper, door, rubber, round style, screw retained. One and five sixteenths (1-5/16) inch diameter.

$20.40/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door bumper

p/n: 30-0002-71

Bumper, door side. One and one fourth (1-1/4) inch by two (2) inch.Length: 2.0 inches. Width: 1.25 inches.

$16.70/ea.
In Stock
Bowdrill cloth tape

p/n: 70-1172-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our

$15.50/ea.
In Stock
Door bumper

p/n: 30-0021-71

Pad, door jamb.Length: 1.50 inches. Width: 1.25 inches.

$14.50/ea.
In Stock
Tan bowdrill cloth tape

p/n: 70-1173-65

Tape, brown (tan) bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such

$13.90/ea.
In Stock
Door bumper

p/n: 30-0032-71

Pad, for door. Circular shape, one and one fourth (1-1/4) inch diameter.

$13.00/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Side roof rail weatherstrip

p/n: 30-0035-65

Weatherstrip, side window, rubber only. Fits in metal retainer as shown.Width: 1.0625 inches. Height: .50 inches.

$6.20/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.40/ft.
In Stock
Bijur lubricator spring seal

p/n: 30-0434-32

Seal, spring shackle. For models with Bijur lubrication systems.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Grommet

p/n: 32-0155-37

Grommet, sidemount upper. Sheet Metal Hole: 7/8" Center Hole: 1/2" Outside Diameter: 1-5/16" Slot Width: 1/16"

$4.00/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock