Search Results

78 items found matching 1933 Chrysler Imperial CQ 2 door Coupe
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Transmission handbrake damper service

p/n: 40-0351-12

Plate assembly transmission damper, brake drum, parking or hand. Revulcanization service only.

$224.30/ea.
Call or Email
Accelerator pedal pad

p/n: 40-0014-40

Accelerator pedal. Perfect copy in every detail, including heavy two (2) piece metal core with mounting tabs as original.Length: 10.3125 inches.

$190.50/ea.
Made to Order Takes 2-3 Days
Windshield Weatherstrip Channel

p/n: 17-0032-52

12 (twelve) foot strip of windshield weatherstrip channel. Seals windshield glass to body and protects interior of vehicle.

$179.60/ea.
In Stock
Accelerator pedal pad

p/n: 40-0524-40

Accelerator pedal. Perfect copy in every detail, including heavy one (1) piece metal core with mounting tabs as original.Length: 10.375 inches.

$177.70/ea.
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Side roof rail weatherstrip

p/n: 40-0095-65

Weatherstrip, convertible top to side windows. Fifteen sixteenths (15/16) inch by five eighths (5/8) inch. Sold in twelve (12) foot strips only.

$120.10/ea.
In Stock
Side mount grommet

p/n: 40-0005-37

Grommets, sidemount support arm on fender. Two and one half (2-1/2) inch inside diameter by four and seven eighths (4-7/8) inch outside diameter.

$112.70/pr.
Made to Order Takes 1-2 Days
Headlight mounting pad service

p/n: 40-0312-14

Anchor pad, head light crossbar to radiator shell. Right and left. Revulcanization service only.

$112.50/pr.
Call or Email
Rear bumper grommet

p/n: 40-0112-30

Grommets, rear bumper symmetrical, right and left. Perfect detailing on both inner and outer surfaces. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and one fourths inch (2-1/4") outside width by one and three fourths i

$112.10/pr.
In Stock
Windshield Filler

p/n: 40-0319-52

Filler or plug, windshield upper corner.

$108.30/set
In Stock
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.40/ea.
In Stock
Exhaust system hanger service

p/n: 40-0350-13

Muffler support hanger insulator assembly. Revulcanization service only.

$93.30/ea.
Call or Email
Side mount grommet

p/n: 40-0039-37

Grommets, sidemount.Length: 5.75 inches.

$87.50/pr.
In Stock
Shock absorber arm seal

p/n: 40-0081-32

Dust seal set, shock absorber link, rubber only. Eight (8) piece set.

$81.10/set
Made to Order Takes 1-2 Days
Rumbleseat step pad

p/n: 40-0012-44

Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.

$77.60/ea.
In Stock
Brake and clutch pedal pad

p/n: 40-0072-22

Pad, brake and clutch pedal.Length: 3.9375 inches. Width: 2.9375 inches.

$77.10/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Brake and clutch pedal pad

p/n: 40-0038-22

Pad, brake and clutch pedal. See also our #40-0072-22.Length: 3.8125 inches. Width: 2.3125 inches.

$69.10/pr.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$65.30/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$60.40/pr.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$58.60/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$58.40/ea.
In Stock
Windshield weatherstrip

p/n: 40-0320-52

Seal, windshield. Lower, glass frame to cowl. Approximately four (4) foot strip. Note: for 2 piece windshields

$58.40/ea.
In Stock
Fuel neck grommet

p/n: 40-0091-39

Grommet, fuel filler neck. Fully molded large oval style. Bottom is flat. Four and one half inch (4 1/2") outside width by five by one half inch (5 1/2") outside length. Two and five sixteenths inch (2-5/16") inside hole diameter by three fourths inch (3/

$56.10/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Cowl vent gasket

p/n: 40-0170-54

Gasket, cowl vent, high grade sponge for twin cowl vents of thirty four (34) inch circumference.Length: 34.0 inches. Width: .75 inches. Height: .

$54.10/pr.
In Stock
Hood bumper

p/n: 40-0164-42

Pad, hood panel center bracket. Hollow, to fit over original steel bracket.Length: 1.375 inches. Width: 1.375 inches.

$54.00/pr.
In Stock
Side mount cover pad

p/n: 40-0314-37

Anti-rattle, spare wheel cover in fenderwell.Width: .25 inches.

$53.80/pr.
In Stock
Vacuum clutch cylinder boot

p/n: 40-0084-24

Boot, automatic clutch vacuum cylinder rod.Length: 4.0 inches.

$53.60/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 40-0067-39

Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.

$51.60/ea.
In Stock
Hood bumper

p/n: 40-0354-42

Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.

$51.60/pr.
In Stock
Gearshift boot

p/n: 40-0074-88

Dust cover, gearshift lever. Elbow type.

$50.10/ea.
Made to Order Takes 1-2 Days
Side mount grommet

p/n: 40-0165-37

Grommet, spare wheel mounting brace, side mounted spares.

$50.10/pr.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0163-88

Dust cover, gearshift lever.

$47.60/ea.
In Stock
Door weatherstrip

p/n: 40-0208-73

Weatherstrip, door bottom on door. Three thirty seconds (3/32) inch thick, two (2) inch wide, perforated for retaining screws. Forty eight (48) inch strip.

$44.00/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$38.20/pr.
In Stock
Horn trumpet grommet

p/n: 40-0086-21

Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.

$38.10/pr.
Made to Order Takes 1-2 Days
Flexible run channel

p/n: 40-0309-57

Channel, side window glass, vertical run. (Use our #40-0280-57 across top).

$34.60/pr.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$29.50/pr.
In Stock
Taillight mounting pad

p/n: 40-0061-15

Pad, taillight mounting.Chrysler 1932-33 Pad, tail light mounting. Chrysler and other WPC cars. Chrysler 1932-33 Pad, rumbleseat step mounting.

$23.40/ea.
In Stock
Hood bumper

p/n: 70-1507-42

Bumper, hood side panel. Metal core as original, six (6) per car.

$20.80/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Brake shaft stop bumper

p/n: 40-0343-24

Cushion cap assembly, brake and clutch pedal stop screw. Brass cap with vulcanized rubber pad.Height: .50 inches.

$17.60/ea.
In Stock
Door bumper

p/n: 40-0316-70

Bumper, door side, lower, on lock post. Retained by dovetail tapping plate.Length: 1.5625 inches. Width: 1.5625 inches.

$16.10/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$15.80/ea.
In Stock
Door bumper

p/n: 40-0215-70

Bumper, door check link.

$14.90/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$12.20/ea.
In Stock
Battery cable grommet

p/n: 40-0322-21

Grommet, battery ground cable through frame.

$12.10/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Door bumper

p/n: 40-0315-70

Bumper, door side on hinge post.

$11.70/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Door and trunk handle gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$10.90/ea.
In Stock
Door bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$10.60/ea.
In Stock
Battery cable grommet

p/n: 40-0333-21

Grommet, battery hot cable through frame. Three fourths (3/4) inch inside diameter for one and three sixteenths (1-3/16) inch hole through frame.

$10.30/ea.
Made to Order Takes 1-2 Days
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$9.40/ea.
In Stock
Door bumper

p/n: 40-0154-70

Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface.Length: 1.0 inches.

$8.50/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$6.80/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.40/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0231-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose.

$4.70/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.40/ft.
In Stock
Wiper control grommet

p/n: 32-0317-52

Grommet, windshield wiper shaft through body. Two (2) per car. Sheet Metal Hole: 7/16" Center Hole: 1/4" Outside Diameter: 3/4" Slot Width: 1/16"

$3.00/ea.
In Stock
Hood bumper

p/n: 33-1285-42

Pads, hood vent door. Self-retaining. Twenty (20) needed per car.

$2.50/ea.
In Stock