Search Results

61 items found matching 1933 Dodge Model DO 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Rear bumper grommet

p/n: 40-0112-30

Grommets, rear bumper symmetrical, right and left. Perfect detailing on both inner and outer surfaces. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and one fourths inch (2-1/4") outside width by one and three fourths i

$112.10/pr.
In Stock
Accelerator pedal pad

p/n: 40-0201-40

Pad, accelerator pedal. Black rubber. For brown see our #40-0201-89. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$100.50/ea.
Call or Email
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.40/ea.
In Stock
Swing out windshield seal

p/n: 40-0171-52

Weatherstrip, swing out windshield. Three (3) piece set, consisting of stationary seal for bottom and sides.

$85.40/set
In Stock
Rumbleseat step pad

p/n: 40-0124-44

Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.

$84.70/ea.
Made to Order Takes 1-2 Days
Rear spare wheel carrier seal

p/n: 40-0141-37

Grommet, rear spare wheel carrier.Some models require 3 pieces (1-1/2 prs).Length: 3.375 inches.

$81.70/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Brown accelerator pedal pad

p/n: 40-0201-89

Pad, accelerator pedal. Brown rubber. For black see our #40-0201-40. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$73.50/ea.
In Stock
Rear Bumper Grommet

p/n: 40-0296-30

Grommets, rear bumper clamp to frame end. Comes as a four (4) piece set. Fully molded rubber. Two and five eighths inch (2-5/8") outside length by two inches (2") outside width by five eighths inch (5/8") height.

$66.90/set
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$65.30/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$60.40/pr.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$58.60/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$58.40/ea.
In Stock
Fuel neck grommet

p/n: 40-0091-39

Grommet, fuel filler neck. Fully molded large oval style. Bottom is flat. Four and one half inch (4 1/2") outside width by five by one half inch (5 1/2") outside length. Two and five sixteenths inch (2-5/16") inside hole diameter by three fourths inch (3/

$56.10/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Cowl vent gasket

p/n: 40-0170-54

Gasket, cowl vent, high grade sponge for twin cowl vents of thirty four (34) inch circumference.Length: 34.0 inches. Width: .75 inches. Height: .

$54.10/pr.
In Stock
Hood bumper

p/n: 40-0164-42

Pad, hood panel center bracket. Hollow, to fit over original steel bracket.Length: 1.375 inches. Width: 1.375 inches.

$54.00/pr.
Made to Order Takes 1-2 Days