Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

82 items found matching 1934 Chevrolet Master 2 door Convertible
Front Door Vent Window Set

p/n: 90-0336-90

This front door vent window weatherstrip set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$204.30/set
$193.99/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0004-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$186.89/pr.
Made to Order Takes 5-7 Days
Front bow weatherstrip

p/n: 70-0137-64

Weatherstrip, front bow-to-windshield, soft rubber, hollow body, proper screw holes, hinged flaps front and back.

$180.29/ea.
Made to Order Takes 5-7 Days
Motor mount service

p/n: 60-0422-11

Motor mount, front (engine front support). Two (2) required per car. Revulcanization service only. Send in both parts of your old motor mounts.

$178.99/pr.
Call or Email
Windshield frame mounting pad

p/n: 60-0450-52

Mounting pad, windshield lower frame to body. Forty eight (48) inches long. Molded in two (2) parts with joint in center. Canvas base as original.

$169.19/ea.
Made to Order Takes 5-7 Days
Motor mount service

p/n: 60-0390-11

Cushion, motor mount, side. Two (2) per car. Revulcanization service only.Width: 2.5625 inches.

$160.79/pr.
Call or Email
Motor Mount

p/n: 60-0305-11

Side frame bracket to clutch. Housing bracket, 2-1/8" diameter, 2-1/4" high, round type.

$158.59/pr.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.99/ea.
In Stock
Motor mount service

p/n: 60-0502-11

Insulator, motor support, front.Length: 7.5 inches.

$128.59/ea.
Call or Email
Transmission mounting pad

p/n: 60-0303-25

Insulator replacement set. 2-piece unit of special soft rubber to be used with original steel channel and plate.

$103.79/set
Made to Order Takes 5-7 Days
Rumbleseat step pad

p/n: 60-0501-45

Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.

$88.49/ea.
Made to Order Takes 5-7 Days
Rear spare wheel carrier pad

p/n: 60-0164-37

Pad, rear mounted spare wheel support. Seven (7) inch by seven (7) inch, three (3) hole pattern, brass core as original.Width: 7.0 inches. Height: 7.

$84.19/ea.
Made to Order Takes 5-7 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$82.79/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$82.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$82.79/ea.
In Stock
Front spring bumper

p/n: 60-0021-35

Rebound bumper, front spring and rear spring for beam axle cars, steel ring reinforced as original.Height: 2.4375 inches.

$80.99/pr.
In Stock
Hood corner pad

p/n: 60-0053-42

Pads, hood rear corners, right and left. Metal core as original, with metal tabs for securing to hood.Width: 1.3125 inches. Height: 1.50 inches.

$78.29/pr.
In Stock
Side mount spare wheel grommet

p/n: 60-0331-37

Grommet, sidemount wheel carrier-through-fender, right and left.

$75.99/pr.
Made to Order Takes 5-7 Days
Hood corner pad

p/n: 60-0052-42

Pads, hood front corners, right and left. Metal core as original, with metal tabs for securing to hood.Width: 1.0 inches. Height: 1.25 inches.

$63.29/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$59.89/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$56.59/pr.
In Stock
Brake cable boot

p/n: 60-0155-24

Boot, rear, brake cable end at brake backing plate. Three and one half (3-1/2) inches long.Length: 3.50 inches.

$53.39/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$51.79/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$50.39/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$50.39/ea.
In Stock
Bowtie emblem pedal pad

p/n: 60-0043-22

Pads, brake and clutch pedals. One and seven eighths (1-7/8) inch by four (4) inch overall. Excellent detail with bowtie emblem like original.

$49.79/pr.
In Stock
Accelerator pedal pad

p/n: 60-0430-40

Cover, accelerator pedal. Exact pattern of original. Slipover type. Use your old steel core.Length: 7.875 inches.

$48.69/ea.
Made to Order Takes 5-7 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$48.49/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 60-0191-87

Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$48.49/pr.
Made to Order Takes 5-7 Days
Accelerator rod seal

p/n: 60-0086-40

Grommet, accelerator rod through toe board. Brass core as original.

$46.79/ea.
Made to Order Takes 5-7 Days
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Exhaust support grommet

p/n: 60-0404-13

Grommet, muffler pipe support.Length: 3.125 inches.

$41.69/ea.
Made to Order Takes 5-7 Days
Horn button contact cushion

p/n: 60-0344-21

Cushion, horn blowing button.Height: 1.0 inches.

$39.59/ea.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$37.99/ea.
In Stock
Taillight mounting pad

p/n: 60-0075-15

Pad, taillight and license bracket mounting. Two and five eighths (2-5/8) inch by four and one half (4-1/2) inch.Length: 4.5 inches. Width: 2.625 inches.

$36.89/ea.
In Stock
Cowl vent gasket

p/n: 60-0339-54

Gasket, cowl vent cover.Width: 18.25 inches. Height: 4.0 inches.

$33.59/ea.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$33.49/ea.
In Stock
Headlight mounting pad

p/n: 60-0363-14

Pad, headlight support to radiator shell.

$27.29/pr.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$25.69/ea.
In Stock
Door alignment pad

p/n: 70-1821-71

Wedge pads, door aligning.Length: 1.125 inches. Width: .5 inches. Height: .875 inches.

$24.99/pr.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$23.49/ea.
In Stock
Brown steering column cushion

p/n: 60-0012-89

Grommet, steering column to cowl, for U-bolt clamp. Brown rubber. For black see our #60-0012-36.Color:brown Height: 1.25 inches.

$22.89/ea.
In Stock
Steering column cushion

p/n: 60-0012-36

Grommet, steering column to cowl, for U-bolt clamp. Black rubber. For brown see our #60-0012-89.Height: 1.25 inches.

$21.99/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$21.89/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$18.29/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$17.99/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$17.99/ea.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$17.39/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$15.99/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$14.99/ea.
In Stock