Search Results

52 items found matching 1934 Dodge Deluxe DR 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Rear bumper grommet

p/n: 40-0112-30

Grommets, rear bumper symmetrical, right and left. Perfect detailing on both inner and outer surfaces. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and one fourths inch (2-1/4") outside width by one and three fourths i

$112.10/pr.
In Stock
Accelerator pedal pad

p/n: 40-0201-40

Pad, accelerator pedal. Black rubber. For brown see our #40-0201-89. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$100.50/ea.
Call or Email
Swing-out Windshield Weatherstrip

p/n: 40-0033-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$87.20/ea.
In Stock
Swing out windshield seal

p/n: 40-0171-52

Weatherstrip, swing out windshield. Three (3) piece set, consisting of stationary seal for bottom and sides.

$85.40/set
In Stock
Rear spare wheel carrier seal

p/n: 40-0141-37

Grommet, rear spare wheel carrier.Some models require 3 pieces (1-1/2 prs).Length: 3.375 inches.

$81.70/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Brown accelerator pedal pad

p/n: 40-0201-89

Pad, accelerator pedal. Brown rubber. For black see our #40-0201-40. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$73.50/ea.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$65.30/ea.
In Stock
Fenderskirt edge seal

p/n: 40-0279-44

Pad, wheel shield. Closely copied from original for perfect fit. Ten (10) foot strip, sufficient for one (1) car.Length: 120.0 inches. Height: .75 inches.

$61.70/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$60.40/pr.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$58.60/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$58.40/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Brown gearshift boot

p/n: 40-0111-89

Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.

$55.00/ea.
In Stock
Side mount clamp cushion

p/n: 40-0138-37

Cushion, sidemount clamp. Two and one eighth (2-1/8) inch by four and five eighths (4-5/8) inch.Length: 4.625 inches. Width: 2.125 inches.

$50.10/ea.
In Stock
Gearshift boot

p/n: 40-0111-88

Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.

$46.10/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$38.20/pr.
In Stock
Horn trumpet grommet

p/n: 40-0086-21

Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.

$38.10/pr.
Made to Order Takes 1-2 Days
Bowdrill cloth tape

p/n: 70-1175-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or

$32.80/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$29.50/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$15.80/ea.
In Stock
Bowdrill cloth tape

p/n: 70-1172-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our

$15.50/ea.
In Stock
Door bumper

p/n: 40-0215-70

Bumper, door check link.

$14.90/ea.
In Stock
Tan bowdrill cloth tape

p/n: 70-1173-65

Tape, brown (tan) bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such

$13.90/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$12.20/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Door and trunk handle gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$10.90/ea.
In Stock
Door bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$10.60/ea.
In Stock
Door bumper

p/n: 40-0154-70

Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface.Length: 1.0 inches.

$8.50/ea.
In Stock
Spare wheel carrier grommet

p/n: 32-0253-37

Grommet, rear spare wheel carrier mounting bracket. Sheet Metal Hole: 1-1/16" Center Hole: 5/8" Outside Diameter: 2-1/16" Slot Width: 3/32"

$8.30/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$6.80/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.40/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.40/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock