Search Results

78 items found matching 1935 Dodge New Value DU 4 door Sedan - 7 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Swing-Out Windshield Weatherstrip Set

p/n: 70-1276-52

This swing-out windshield weatherstrip set includes the fully molded bottom seal and the rubber strip that runs around the top and sides. The fully molded bottom piece is perfectly formed for the corners and includes a knotch for the windshield crank.

$198.39/set
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$170.39/pr.
In Stock
Horn mounting pad

p/n: 40-0129-21

Pad, horn grille mounting below headlight in fender.

$117.19/pr.
In Stock
Accelerator pedal pad

p/n: 40-0201-40

Pad, accelerator pedal. Black rubber. For brown see our #40-0201-89. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$103.59/ea.
Call or Email
Motor mount service

p/n: 70-2666-11

Engine support, front. Revulcanization service only.

$100.39/ea.
Call or Email
Swing-out Windshield Weatherstrip

p/n: 40-0036-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.99/ea.
In Stock
Swing-out Windshield Weatherstrip

p/n: 40-0033-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$90.79/ea.
In Stock
Swing out windshield seal

p/n: 40-0171-52

Weatherstrip, swing out windshield. Three (3) piece set, consisting of stationary seal for bottom and sides.

$88.89/set
In Stock
Door weatherstrip

p/n: 40-0538-73

Weatherstrip, door bottom, four (4) door. For two (2) door see our #40-0537-73. Held to door by steel strip. Sponge type as original.Width: 1.375 inches.

$87.39/set
In Stock
Fender Welting 1/4" Bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Headlight mounting pad

p/n: 40-0159-14

Pad, headlight mounting. Made with small weatherlip around edge.Length: 5.6875 inches. Width: 2.875 inches.

$77.79/pr.
In Stock
Brown accelerator pedal pad

p/n: 40-0201-89

Pad, accelerator pedal. Brown rubber. For black see our #40-0201-40. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.

$76.49/ea.
In Stock
Front bumper grommet

p/n: 40-0195-30

Grommet, front bumper. Three and one half inch (3-1/2") inch diameter by one and three fourths inch (1-3/4") inside hole diameter by five eighths inch (5/8") height.

$68.39/pr.
In Stock
Taillight mounting pad

p/n: 40-0160-15

Pad, taillight mounting. This is made with small weatherlip around edge.Length: 6.375 inches. Width: 2.75 inches.

$68.39/pr.
Made to Order Takes 1-2 Days
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$67.99/ea.
In Stock
Brown accelerator pedal pad

p/n: 40-0113-89

Pad, accelerator pedal. Brown rubber. For black see our #40-0113-40. Slipover type. Exact pattern, perfect copy in all details.

$66.79/ea.
Made to Order Takes 1-2 Days
Swing-out Windshield Weatherstrip

p/n: 40-0018-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$65.29/ea.
In Stock
Fenderskirt edge seal

p/n: 40-0279-44

Pad, wheel shield. Closely copied from original for perfect fit. Ten (10) foot strip, sufficient for one (1) car.Length: 120.0 inches. Height: .75 inches.

$64.29/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$62.89/pr.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$60.99/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$60.79/ea.
In Stock
Brown gearshift boot

p/n: 40-0111-89

Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.

$57.29/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 40-0272-39

Grommet, fuel filler neck. Oblong shape, fully molded rubber. Four and one fourth inch (4 1/4") outside width by five and five eighths inch (5 5/8") outside length by seven eighths (7/8") height. Two and one sixteenth inch (2 1/16") top hole width by two

$56.29/ea.
Made to Order Takes 1-2 Days
Accelerator pedal pad

p/n: 40-0113-40

Pad, accelerator pedal. Black rubber. For brown see our #40-0113-89. Slipover type. Exact pattern, perfect copy in all details.Length: 8.6875 inches.

$54.89/ea.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 40-0522-21

Grommet, firewall pass through, rectangular. Large type. Also see our #40-0523-21 for smaller type if needed.

$53.99/ea.
Made to Order Takes 1-2 Days
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Five eights (5/8) inch wide, six (6) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications without vent window use a six (6) foot strip. Application

$52.99/ea.
In Stock
Fuel neck grommet

p/n: 40-0139-39

Grommet, fuel filler neck. Fully molded rubber, slightly angled. Four and one half inch (4 1/2") outside width by four and five eighths inch (4 5/8") outside length by two and one fourth inch (2-1/4") inside hole diameter.

$52.19/ea.
In Stock
Side mount clamp cushion

p/n: 40-0138-37

Cushion, sidemount clamp. Two and one eighth (2-1/8) inch by four and five eighths (4-5/8) inch.Length: 4.625 inches. Width: 2.125 inches.

$52.19/ea.
In Stock
Gearshift boot

p/n: 40-0111-88

Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.

$49.89/ea.
In Stock
Starter pedal pad

p/n: 40-0200-21

Pad, starter pedal. Excellent quality with detail and workmanship as found in original.

$49.89/ea.
Made to Order Takes 1-2 Days
Taillight mounting pad

p/n: 40-0198-15

Pad, taillight mounting. Plain type, no bead.Length: 6.0625 inches. Width: 2.375 inches.

$49.89/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Spare wheel mounting pad

p/n: 40-0199-37

Pad, rear spare wheel bracket mounting.Length: 6.0 inches.

$44.99/pr.
Made to Order Takes 2-3 Days
Flexible Run Channel

p/n: 70-1107-57

Channel, flexible window run, un-beaded. Five eighths (5/8) inch wide, five (5) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications with vent window use a five (5) ft. strip. Applications

$44.79/ea.
In Stock
Trunk bumper

p/n: 33-0203-85

Bumper, trunk lid.

$41.89/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$41.39/pr.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Firewall grommet

p/n: 40-0523-21

Grommet, firewall pass through, rectangular. Also see our #40-0522-21 for larger type if needed.

$34.39/ea.
In Stock
Accelerator rod seal

p/n: 40-0205-88

Seal, accelerator rod through floorboard.

$33.59/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$31.99/pr.
In Stock
Door handle gasket

p/n: 40-0191-70

Pad, outside door handle escutcheon. Compare with our #40-0207-70.

$26.89/pr.
In Stock
Firewall grommet

p/n: 40-0204-21

Grommet, wire harness through firewall. Made with quality rubber as original.

$26.79/ea.
In Stock
Cowl drain gutter hose grommet

p/n: 40-0202-54

Grommet, cowl drain. One and seven sixteenths (1-7/16) inch outside diameter for seven sixteenths (7/16) inch drain hose through firewall.

$23.79/ea.
In Stock
Brown steering column cushion

p/n: 60-0012-89

Grommet, steering column to cowl, for U-bolt clamp. Brown rubber. For black see our #60-0012-36.Color:brown Height: 1.25 inches.

$21.29/ea.
In Stock
Steering column cushion

p/n: 60-0012-36

Grommet, steering column to cowl, for U-bolt clamp. Black rubber. For brown see our #60-0012-89.Height: 1.25 inches.

$20.49/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Exhaust Support Grommet

p/n: 60-0031-13

Grommet, rear and middle muffler hanger.Height: .8125 inches.

$17.69/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$17.19/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$13.29/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$12.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Door and trunk handle gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$11.89/ea.
In Stock
Door handle gasket

p/n: 40-0133-70

Pad, door handle escutcheon. Two and three fourths (2-3/4) inch by one and one fourth (1-1/4) inch.Width: 2.75 inches. Height: 1.25 inches.

$11.69/ea.
In Stock
Door bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$11.49/ea.
In Stock
Roof insert seal

p/n: 20-0102-45

Seal, top insert for closed cars without turret top. Fits groove between cloth top center panel and steel surround.

$10.59/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.79/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.79/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$8.59/ea.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$7.39/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.99/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.99/ft.
In Stock
Door weatherstrip

p/n: 40-0487-73

Weatherstrip, door bottom.Width: 1.375 inches.

$6.79/ft.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$6.49/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$6.39/ft.
In Stock
Window weatherstrip

p/n: 30-0044-77

Channel, back window. Extra light, plain channel for one fourth (1/4") inch glass. Three thirty seconds (3/32") inch thick wall.Width: .4375 inches.

$5.99/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.89/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.89/ft.
In Stock
Windshield weatherstrip

p/n: 40-0015-52

Channel, windshield mounting with three eighths (3/8) inch wide opening and one eighth (1/8) inch diameter retaining bead, for metal frame around

$5.89/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.79/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$5.19/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.69/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$4.39/ft.
In Stock
Sash Channel Filler, 1/32" Cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$4.39/ft.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.79/ft.
In Stock