Search Results

87 items found matching 1936 Buick Roadmaster 4 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Detachable Center Post Pad

p/n: 50-0119-67

Pad, detachable center post, top and bottom. Brass core, four (4) piece set.

$204.90/set
In Stock
Front Door Vent Window Kit

p/n: 90-0333-90

This front door vent window weatherstrip kit is a six (6) piece set that contains the main vent window seals, base extensions, and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$190.90/set
$181.40/set
5% discount
Kit
Front spring bumper service

p/n: 50-0383-32

Front Spring Bumper. Revulcanization service only.

$178.50/pr.
Call or Email
Windshield Gasket

p/n: 50-0539-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$176.20/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0001-55

This front door vent window weatherstrip set contains the main seals for the vent windows and the base extension pieces for the frame. They are designed and molded from original parts for superior fitment and seal.

$176.00/set
Made to Order Takes 1-2 Days
Front bow weatherstrip

p/n: 70-0046-64

Weatherstrip, convertible top front bow-to-windshield with integral end pads.

$155.80/ea.
Made to Order Takes 2-3 Days
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Transmission mounting pad

p/n: 50-0257-25

Pad, transmission support. Special resilient rubber. Use your original channel, plate and cap. One (1) set, (2 pad per set) per car.

$121.50/set
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 70-0073-29

Grommets, rear bumper. Fully molded rubber. Five inches (5") outside length by three and five eighths inch (3-5/8") outside width by three and five sixteenths inch (3-5/16") inside hole length by one and one fourth inch (1-1/4") inside hole width by one a

$104.10/pr.
In Stock
Front suspension rebound pad

p/n: 50-0083-32

Rebound pad, front suspension, upper arm, on frame. Rubber body, steel core with five sixteenths (5/16) inch stud.

$99.40/pr.
In Stock
Windshield division bar gasket

p/n: 50-0301-51

Gasket set, windshield division post, inner and outer, also acts as retainer for outer division bar chrome molding.

$90.80/set
In Stock
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$90.50/ea.
In Stock
Front spring bumper

p/n: 70-0215-32

Bumpers, front spring, lower arm.

$86.50/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$74.20/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Axle rebound pad

p/n: 50-0294-35

Bumper, rear axle to frame.

$70.50/pr.
Made to Order Takes 1-2 Days
Rear window division bar seal

p/n: 70-0068-82

Seal, rear window divider, inner and outer for two (2) and three (3) light rear windows, two (2) piece set for one (1) division bar.

$69.00/set
In Stock
Brown brake and clutch pad

p/n: 50-0049-89

Pad, brake and clutch pedal. Brown rubber. For black see our #50-0049-22. Full slip-over type as original.Color:brown Width: 3.0 inches.

$67.00/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0049-22

Pad, brake and clutch pedal. Black rubber. For brown see our #50-0049-89. Full slip-over type as original.Width: 3.0 inches. Height: 2.75 inches.

$65.70/pr.
In Stock
Convertible Top - Arm Pad

p/n: 50-0319-67

Bottom pad, right and left side for 3rd bow folding post. Steel core with all original features. Quality rubber.

$63.40/pr.
Made to Order Takes 1-2 Days
Hood corner pad

p/n: 50-0036-42

Pads, hood corners, front. Original type with metal core and retaining tab.Width: 1.625 inches.

$62.50/pr.
In Stock
Hood corner pad

p/n: 70-0047-42

Pads, hood corners, rear. Original style with metal core and metal fastening tabs.

$62.50/pr.
In Stock
Front bumper grommet

p/n: 50-0031-28

Grommets, front bumper. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two inches (2") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by fifteen sixteenths inc

$57.10/pr.
In Stock
Door weatherstrip

p/n: 70-0229-73

Weatherstrip, front door upper hinge, brass core as original.

$54.10/pr.
In Stock
Accelerator pedal pad

p/n: 50-0037-40

Pad, accelerator pedal. Slip-over type with heavy retainer lip to fit over original pedal after stripping old rubber off.Length: 8.625 inches.

$52.70/ea.
In Stock
Fuel neck grommet

p/n: 70-0050-39

Grommet, fuel filler neck. Fully duplicates original with large retaining flange. Flexible, molded rubber. Four and one eighth inch (4 1/8") outside diameter by two and three sixteenth inch (2 3/16") inside hole diameter by fifteen sixteenths inch (15/16"

$52.40/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Taillight Mounting Pad

p/n: 50-0069-15

Taillight mounting pad. Replaces #1292638-40.

$50.50/pr.
In Stock
Headlight Mounting Pad

p/n: 50-0068-14

Headlight mounting pad. Replaces #1292766.

$49.50/pr.
In Stock
Cowl Vent Weatherstrip

p/n: 70-0224-54

Weatherstrip, cowl vent. Original solid rubber configuration, not a sponge substitute. A top quality part for your classic vehicle restoration.

$46.30/ea.
In Stock
Convertible Top - Rest Block

p/n: 50-0318-67

Rest block, convertible top. Two (2) required per car. Fits into dovetail retainer. Length: 1.375 inches. Width: 1.125 inches.

$45.50/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Rumbleseat step mounting pad

p/n: 70-0043-44

Pad, rumbleseat step mounting for fender, double beaded edge per original.Width: 4.375 inches.

$43.20/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Radio antenna end loop

p/n: 70-0105-21

End loop, radio antenna. Cord reinforced rubber with metal grommet. Mounted on runningboard on some models.

$38.20/ea.
In Stock
Antenna boot

p/n: 70-0212-21

Boot, runningboard antenna wire connection.

$34.70/ea.
In Stock
Side mount cover pad

p/n: 70-0077-37

Pads, channel type, for sidemount covers. Eight (8) piece set.Width: .25 inches. Height: .6875 inches.

$33.70/set
Made to Order Takes 3 Days
Bowdrill cloth tape

p/n: 70-1175-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or

$32.80/ea.
In Stock
Rear Spring Pad

p/n: 70-0245-32

Pad, rear spring insulator for two and one fourth (2-1/4) inch wide springs. (see our number 70-0191-32 for two (2) inch springs). Four (4) per vehicle.

$26.90/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Windshield division bar gasket

p/n: 70-0059-51

Gasket, set, inner and outer, for divided windshield center post. Two (2) piece set.

$25.60/set
In Stock
Firewall grommet

p/n: 50-0396-20

Grommet, firewall for wiring harness and other usage.Width: 2.0 inches. Height: 1.4375 inches.

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Bowdrill cloth tape

p/n: 70-1172-65

Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our

$15.50/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$15.40/ea.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$14.90/ea.
In Stock
Wiper transmission gasket

p/n: 70-1196-53

Mounting gasket, windshield wiper transmission.Width: 2.5 inches.

$14.40/pr.
In Stock
Tan bowdrill cloth tape

p/n: 70-1173-65

Tape, brown (tan) bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Two and one half (2-1/2) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such

$13.90/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Door bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$9.40/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door weatherstrip

p/n: 70-0066-73

Seal, door bottom, held by metal track or by clips. (See our # 70-0391-73 for clips). 2 door styles need about seven (7) foot per car.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Roof Rail Weatherstrip

p/n: 70-1170-99

Weatherstrip, side roof rail. Three fourths inches (3/4") wide. Fits into metal channel retainer. See our #70-1172-65 and #70-1173-65 for cloth covering. Note: Order twelve feet (12') for two (2) door models, fourteen feet (14') for four (4) door

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1191-52

Gasket, window, for models without chrome reveal molding.

$5.40/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Side mount tire cover seal

p/n: 50-0541-37

Seal or strip, side mount tire cover.Width: .28125 inches. Height: .15625 inches.

$3.40/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock
Wiring grommet

p/n: 32-0047-14

Grommet, electric wire through body for head and taillights. Sheet Metal Hole: 11/16" Center Hole: 3/8" Outside Diameter: 1" Slot Width: 1/16"

$3.40/ea.
In Stock
Door weatherstrip fastener

p/n: 70-0391-73

Clip, door bottom weatherstrip retaining, for our #70-0066-73 lower door weatherstrip, to fit one fourth (1/4) inch holes. Doors usually require one clip per every six (6) inches. Estimate needs accordingly.

$2.50/ea.
In Stock