Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

83 items found matching 1937 Plymouth Deluxe P4 2 door Coupe
Front Door Vent Window Weatherstrips

p/n: 40-0173-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$200.59/pr.
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$170.39/pr.
In Stock
Quarter window weatherstrip

p/n: 40-0461-77

Weatherstrip, fixed quarter window. Vulcanized into ring.

$155.59/pr.
In Stock
Suspension arm bumper

p/n: 40-0384-32

Bumper, front or rear axle. Revulcanization service only.

$153.89/pr.
Call or Email
Rear Window Gasket

p/n: 40-0400-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$144.49/ea.
Made to Order Takes 2-3 Days
Gearshift floorplate

p/n: 40-0108-88

Floorplate, gearshift. Black rubber. For brown see our #40-0108-89. Perfect copy of beading. Steel core as original, but without cover boot.

$125.49/ea.
Made to Order Takes 2-3 Days
Handbrake floorplate

p/n: 40-0109-24

Floorplate, handbrake. Black rubber. For brown see our #40-0109-89. Brass core, made flat, to be bent as required.Length: 7.25 inches.

$108.89/ea.
Made to Order Takes 2-3 Days
Motor mount service

p/n: 40-0410-11

Front motor mount. Revulcanization service only. Send in core and allow three weeks for service. 6 cylinders only.

$107.89/ea.
Call or Email
Front bumper grommet

p/n: 40-0057-30

Grommets, front bumper. Fully molded rubber, inside hole slightly rectangular. Four and one half inche (4-1/2") length by three and three eighths inch (3-3/8") width by one and three eighths inch (1-3/8") inside hole length by one and one fourth inch (1-1

$107.59/pr.
In Stock
Bumper grommet

p/n: 40-0047-30

Grommets, front and rear bumpers, right and left. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width

$105.39/pr.
In Stock
Bumper grommet

p/n: 40-0048-30

Grommets, bumper. Some front and some rear, right and left. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by three and one fourth inch (3-1/4") outside width by one and three fourths (1-3/4") inside hole length by seven

$103.99/pr.
In Stock
Windshield Weatherstrip

p/n: 40-0329-50

This swing-out windshield gasket is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$103.99/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$97.99/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$85.99/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0121-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.

$80.99/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0107-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.

$74.99/pr.
In Stock
Brown steering column grommet

p/n: 40-0144-89

Grommet, steering column to toe board. Brown rubber. For black see our #40-0144-36. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.

$68.39/ea.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$67.99/ea.
Made to Order Takes 1-2 Days
Brake and clutch pedal pad

p/n: 40-0107-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0107-89. Full slip over type to fit old pedal.

$66.89/pr.
Made to Order Takes 1-2 Days
Brown accelerator pedal pad

p/n: 40-0113-89

Pad, accelerator pedal. Brown rubber. For black see our #40-0113-40. Slipover type. Exact pattern, perfect copy in all details.

$66.79/ea.
Made to Order Takes 1-2 Days
Swing-out Windshield Weatherstrip

p/n: 40-0018-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$65.29/ea.
In Stock
Fenderskirt edge seal

p/n: 40-0279-44

Pad, wheel shield. Closely copied from original for perfect fit. Ten (10) foot strip, sufficient for one (1) car.Length: 120.0 inches. Height: .75 inches.

$64.29/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$62.89/pr.
In Stock
Brake and clutch pedal pad

p/n: 40-0121-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0121-89. Oval style, perfect copy.

$61.99/pr.
In Stock
Door weatherstrip

p/n: 40-0537-73

Weatherstrip, door bottom, two (2) door. For four (4) door see our #40-0538-73. Held to door by steel strip. Sponge type as original.Width: 1.375 inches.

$61.99/set
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$60.99/pr.
In Stock
Brown gearshift boot

p/n: 40-0111-89

Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.

$57.29/ea.
In Stock
Cowl vent gasket

p/n: 40-0225-54

Gasket, cowl vent.Length: 16.50 inches.

$55.49/ea.
In Stock
Fuel neck grommet

p/n: 40-0043-39

Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.

$55.49/ea.
In Stock
Accelerator Pedal Pad

p/n: 40-0113-40

Pad, accelerator pedal. Black rubber. Slipover type. Exact pattern, perfect copy in all details.

$54.89/ea.
Made to Order Takes 1-2 Days
Steering column grommet

p/n: 40-0144-36

Grommet, steering column to toe board. Black rubber. For brown see our #40-0144-89. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.

$54.89/ea.
In Stock
Taillight mounting pad

p/n: 40-0136-15

Pad, taillight mounting.Length: 4.25 inches.

$54.89/pr.
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 40-0217-24

Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.

$52.49/pr.
In Stock
Gearshift boot

p/n: 40-0111-88

Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.

$49.89/ea.
In Stock
License light mounting pad

p/n: 40-0135-17

Pad, license light mounting.Length: 5.25 inches. Width: 3.875 inches.

$49.89/ea.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$41.39/pr.
In Stock
Starter button

p/n: 40-0302-89

Button, starter pedal rod. Brown rubber.

$39.19/ea.
Made to Order Takes 1-2 Days
License light mounting pad

p/n: 40-0174-17

Pad, license light mounting. Plain type without edge bead as original.Length: 8.0 inches. Width: 3.25 inches.

$36.69/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Accelerator rod seal

p/n: 40-0205-88

Seal, accelerator rod through floorboard.

$33.59/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$31.99/pr.
In Stock
Firewall grommet

p/n: 40-0222-21

Grommet, firewall, for throttle cable, wiper vacuum line and cowl vent drain hole. Three (3) holes (9/16", 3/8", 1/4").

$31.99/ea.
In Stock
Firewall grommet

p/n: 40-0221-21

Grommet, firewall, for speedometer cable, oil tube, temp. tube, 3 holes (5/16", 1/4", 3/16").

$31.19/ea.
In Stock
Firewall grommet

p/n: 40-0223-21

Grommet, firewall, plain (no holes), for various uses.

$28.29/ea.
Made to Order Takes 1-2 Days