Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

92 items found matching 1938 Pontiac Series 26 4 door Convertible
Detachable center post pad

p/n: 70-0248-67

Pads, center body removable pillar, Brass core, four (4) piece set.

$240.59/set
Made to Order Takes 5-7 Days
Front Door Vent Window Set

p/n: 90-0445-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$223.69/set
Kit
Front Door weatherstrip

p/n: 90-0102-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$205.29/set
In Stock
Motor mount service

p/n: 27-0038-11

Insulator, engine support rear. Two (2) per car. Revulcanization service only.Length: 4.0 inches.

$190.29/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0006-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$180.89/pr.
Made to Order Takes 5-7 Days
Rear Door weatherstrip

p/n: 90-0103-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$160.59/set
Made to Order Takes 5-7 Days
Windshield Gasket

p/n: 70-0601-50

This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$135.99/ea.
In Stock
Windshield Gasket

p/n: 70-1785-50

This Windshield Gasket mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$135.99/ea.
In Stock
Motor mount service

p/n: 27-0037-11

Insulator, engine support, front. One (1) per car. Revulcanization service only.Length: 5.625 inches.

$126.49/ea.
Call or Email
Convertible Front Header Bow Weatherstrip

p/n: 70-0138-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, OUTER, right and left. This weatherstrip is molded with necessary pre-drilled end hook and screw openings to the proper clearance.

$123.59/pr.
Made to Order Takes 5-7 Days
Convertible Front Header Bow Weatherstrip

p/n: 70-0157-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, INNER, right and left.

$117.79/pr.
Made to Order Takes 5-7 Days
Front bumper grommet

p/n: 27-0008-28

Grommet, front bumper. Hollow construction, with retaining flange as original, fully detailed copy. Fully molded rubber. Four and nine sixteenths inch (4-9/16") outside length by two and one half inch (2-1/2") outside width by one and five eighths inch (1

$112.39/pr.
Made to Order Takes 5-7 Days
Accelerator pedal service

p/n: 27-0070-40

Accelerator pedal. Black rubber. For brown see our #27-0070-89. Revulcanization service only.

$106.89/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1128-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$100.99/ea.
In Stock
Brown accelerator service

p/n: 27-0070-89

Accelerator pedal. Brown rubber. For black see our #27-0070-40. Revulcanization service only.

$93.79/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1129-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$92.29/ea.
In Stock
Front bumper grommet

p/n: 27-0004-28

Grommet, front or rear bumper. Hollow construction, perfect fit. Note: In 1935 this grommer is used on the front bumper. In 1937-1938: this bumper is used on the rear bumper

$86.59/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$85.39/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$85.39/ea.
In Stock
Fender Welting with 3/16 Bead - 50 Ft. Roll

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$85.39/ea.
In Stock
Front spring bumper

p/n: 27-0007-32

Bumper, front spring, lower.Height: 3.25 inches.

$82.69/pr.
Made to Order Takes 5-7 Days
Hinge post weatherstrip

p/n: 70-0383-73

Weatherstrip, hinge post at instrument panel. Steel inserts at holes

$82.49/pr.
Made to Order Takes 5-7 Days
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$78.69/pr.
In Stock
Front stabilizer bushing

p/n: 27-0014-34

Bushing, front stabilizer bar insulator.Length: 2.125 inches. Width: .6875 inches.

$77.99/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$72.19/set
In Stock
Brown brake and clutch pad

p/n: 25-0024-89

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Brown rubber. For black see our #25-0024-22.

$66.59/pr.
Made to Order Takes 5-7 Days
Fuel Neck Grommet

p/n: 27-0006-41

Grommet, fuel filler neck, with retaining flange as original.

$66.59/ea.
Made to Order Takes 5-7 Days
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$66.59/set
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper Pair - for upper control arm on frame.

$64.99/pr.
In Stock
Brake and clutch pedal pad

p/n: 25-0024-22

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Black rubber. For brown see our #25-0024-89.Length: 3.125 inches.

$64.69/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$58.39/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

This Beltline Weatherstrip is sold as a three (3) foot pair. The beltline is used for side window inner and/or outer, front and/or rear doors. Available in a 3ft pair.

$55.49/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0695-74

Division bar seal. Proper cross section rubber molded to original style metal with authentic attaching tabs. Note: used on front door vent assembly for selected 1937-38 convertible models and rear door vent on selected 1940-42 four door model

$54.69/pr.
In Stock
Brown gearshift boot

p/n: 50-0035-89

Boot, gearshift. Brown rubber. For black see our #50-0035-24.Color:brown Width: 2.8125 inches.

$53.99/ea.
Made to Order Takes 5-7 Days
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$53.39/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$51.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$51.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25 Ft. Roll

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$49.99/ea.
In Stock
Horn button contact cushion

p/n: 50-0409-21

Separator, horn contact. For standard or non-flexible wheel.

$49.19/ea.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$46.89/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$45.89/ea.
In Stock
Radio Antenna End Loop

p/n: 70-0105-21

End loop, radio antenna. Cord reinforced rubber with metal grommet. Mounted on running board on some models.

$45.79/ea.
In Stock
Antenna Boot

p/n: 70-0212-21

Boot, running board antenna wire connection.

$41.59/ea.
In Stock
Gearshift boot

p/n: 50-0035-24

Boot, gearshift. Black rubber. For brown see our #50-0035-89.Width: 2.8125 inches.

$40.79/ea.
Made to Order Takes 5-7 Days
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$39.19/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$32.99/ea.
Made to Order Takes 5-7 Days
Starter pedal pad

p/n: 25-0049-89

Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.

$31.39/ea.
Made to Order Takes 5-7 Days
Battery carrier edge liner

p/n: 27-0091-21

Seal strip, battery to fender apron. Two (2) correct cross section strips nineteen (19) inches long.

$30.39/set
Made to Order Takes 5-7 Days
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$28.69/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock