Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

132 items found matching 1940 Buick Century 2 door Convertible
Motor mount service

p/n: 50-0295-11

Motor mount, rear. Revulcanization service only.

$254.79/pr.
Call or Email
Front Door Vent Window Set

p/n: 90-0364-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$211.00/set
$200.49/set
5% discount
Kit
Motor mount service

p/n: 50-0279-11

Motor mount, front. Two (2) per car. Revulcanization service only.

$193.99/pr.
Call or Email
Windshield Gasket

p/n: 70-0678-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$184.49/ea.
Made to Order Takes 5-7 Days
Front Door Vent Window Weatherstrips

p/n: 38-0014-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$157.99/pr.
Made to Order Takes 5-7 Days
Transmission mount service

p/n: 50-0315-25

Mounting pad, transmission (also called insulator or support pad). Revulcanization service only.Length: 5.0 inches. Width: 3.4375 inches.

$155.59/ea.
In Stock
Convertible Front Header Bow Weatherstrip

p/n: 70-0138-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, OUTER, right and left. This weatherstrip is molded with necessary pre-drilled end hook and screw openings to the proper clearance.

$119.89/pr.
Made to Order Takes 5-7 Days
Convertible Front Header Bow Weatherstrip

p/n: 70-0157-64

This convertible soft top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible soft top to seal to the windshield, INNER, right and left.

$114.29/pr.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0796-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$106.99/ea.
In Stock
Front or Rear Door Seals

p/n: 90-0130-72

Door edge weatherstrip. Two door seals. Used for the front doors on Chevrolet, Oldsmobile & Pontiac models. Also used for the front or rear doors on Buick models. If needing all four (4) door seals for Buick purchase two (2) pairs. This part is the primar

$106.69/set
In Stock
Accelerator pedal service

p/n: 50-0414-40

Pedal, accelerator. Revulcanization service only. Includes new rubber sockets for hinges.Length: 9.125 inches.

$99.79/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$97.99/ea.
In Stock
Convertible top arm pad

p/n: 70-0503-67

Pads, folding post with brass core.

$94.19/pr.
Made to Order Takes 5-7 Days
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

$92.59/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$82.79/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$82.79/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$82.79/ea.
In Stock
Steering column floorplate

p/n: 50-0415-36

Floorplate, steering column. Black rubber. For brown see our #50-0415-89.Length: 4.125 inches. Width: 4.125 inches.

$81.19/ea.
Made to Order Takes 5-7 Days
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$80.49/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$77.99/pr.
In Stock
Convertible top arm pad

p/n: 70-1217-67

Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core, close copy.

$75.59/pr.
In Stock
Parking light mounting pad

p/n: 50-0058-16

Pad, parking light (fender light).Width: 17.0 inches.

$70.39/pr.
In Stock
Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$69.59/pr.
In Stock
Door bumper

p/n: 70-0168-71

Bumper, door side. Square type held by four (4) screws, metal core as original.

$67.69/pr.
In Stock
Front bumper grommet

p/n: 50-0043-28

Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") i

$66.19/pr.
In Stock
Turn signal mounting pad

p/n: 50-0112-17

Mounting pad, turn signal.Width: 11.625 inches.

$65.99/ea.
Made to Order Takes 5-7 Days
Rear bumper grommet

p/n: 50-0044-29

Grommets, rear bumper. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by two and seven eighths inch (2-7/8") outside width by one and seven eighths inch (1-7/8") inside hole length by five eighths inch (5/8") inside hole width by

$65.29/pr.
Made to Order Takes 5-7 Days
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$64.59/set
In Stock
Rear stabilizer bushing

p/n: 50-0171-34

Bushings, rear stabilizer bar mounting. Fully molded rubber. One and one half inch (1 1/2") length by one and one fourth inch (1 1/4" outside diameter by nine sixteenths inch (9/16") inside hole diameter.

$64.29/pr.
Made to Order Takes 5-7 Days
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$58.69/pr.
In Stock
Front bow weatherstrip

p/n: 60-0440-64

Weatherstrip, front bow to windshield, outer. Installs on convertible top. Approximately four (4) foot ten (10) inches long.

$57.29/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$56.59/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$56.59/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$53.79/pr.
In Stock
Taillight mounting pad

p/n: 50-0052-15

Taillight mounting pad. Replaces #1309896-99.

$53.59/pr.
Made to Order Takes 5-7 Days
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$53.39/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0696-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$52.99/pr.
In Stock
Headlight Door To Lens Ring Seals

p/n: 70-0389-14

This Headlight Door To Lens Ring seal pair is designed from the original part for superior fitment and function. The part works to seal between the headlight door housing and the headlight retaining ring. The part is a single lip type seal for sealed beam headlights.

$52.29/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$51.39/pr.
In Stock
Cowl vent hose

p/n: 50-0259-54

Hose, cowl vent gutter drain.Length: 7.0 inches.

$50.99/ea.
In Stock
Convertible Top Front Bow Weatherstrip

p/n: 70-0100-64

This convertible top Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This header seal installs directly to the windshield frame to seal between the soft top and the top of the windshield.

$50.39/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$50.39/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$50.39/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 6ft lengths.

$50.39/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$48.49/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$47.69/pr.
In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$45.39/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$44.49/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$41.79/pr.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$37.99/ea.
In Stock