Search Results

119 items found matching 1941 Cadillac Series 75 0 door Chassis
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Brown automatic floorplate kit

p/n: 70-1219-89

Floor panels, pedal and steering column, tan rubber to match pedals. For hydramatic shift. Three (3) piece set. For manual shift see our #70-1218-89. We also have these avaliable in black. See parts #70-1218-88 (manual shift) and #70-1219-88 (hydramatic s

$189.60/set
Made to Order Takes 1-2 Days
Brown manual floorplate kit

p/n: 70-1218-89

Floor panels, pedal and steering column, tan rubber to match pedals. For manual shift. Three (3) piece set. For hydramatic shift see our #70-1219-89. We also have these avaliable in black. See parts #70-1218-88 (manual shift) and #70-1219-88 (hydramatic s

$189.60/set
In Stock
Black manual floorplate kit

p/n: 70-1218-88

Floor panels, pedal and steering column, black rubber. For manual shift. Three (3) piece set. For hydramatic shift see our #70-1219-88. We also have these avaliable in tan. See parts #70-1218-89 (manual shift) and #70-1219-89 (hydramatic shift).

$182.10/set
In Stock
Hood to cowl weatherstrip

p/n: 70-1208-42

Weatherstrip, hood to cowl. To facilitate manufacturing, some may be made in two sections.

$169.60/ea.
In Stock
Taillight mounting pad

p/n: 70-1212-15

Pads, taillight mounting. Compound curved right and left hand custom molded pads. Also order the special design weatherproof gaskets for the lenses our #70-1213-15.

$163.40/pr.
In Stock
Front fender shield filler

p/n: 70-0680-44

Filler, front fender dust shield, inner fender to frame including over upper control arm and around battery. Die cut from cotton reinforced sheet rubber.

$159.30/set
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0574-33

Kit, front stabilizer bar link assembly replacement. Twenty two (22) piece set for both sides of one (1) car. Hex head bolt. 3/8"-16nc x 8-7/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$111.60/set
In Stock
License light mounting pad

p/n: 70-1221-17

Pad set, license light mount and lens gasket.Length: 12.625 inches.

$101.00/set
In Stock
Coil spring insulator pad

p/n: 70-0801-32

Pad, coil spring insulator. Molded four (4) piece set for one (1) car.

$100.60/set
In Stock
Rear window division bar seal

p/n: 70-0414-82

Pad set, back window division bar. Molded with screw clearances. Four (4) piece set.

$100.10/set
Made to Order Takes 1-2 Days
Front spring bumper

p/n: 70-0172-32

Bumpers, front spring. Lower arm, original copy, integral molded plate and stud, three eighths (3/8) inch standard thread, for installing.

$100.00/pr.
In Stock
Parking light gasket

p/n: 70-0190-16

Gasket set, parking light and front turn signal. Four (4) piece set.

$95.40/set
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front spring bumper

p/n: 70-0171-32

Bumper, front spring, upper arm (on frame).

$75.60/pr.
In Stock
Brown accelerator pedal pad

p/n: 70-0208-89

Pad, accelerator pedal. Brown rubber. For black see our #70-0208-40. Made to slip over old metal core after removing old rubber.

$71.90/ea.
Made to Order Takes 1-2 Days
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$70.10/pr.
In Stock
Fog light gasket

p/n: 70-0440-45

Gaskets, auxiliary light (fog light) opening cover to fender.

$67.20/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$62.30/pr.
In Stock
Brown brake and clutch pad

p/n: 70-0176-89

Pads, brake and clutch pedals. Brown rubber. For black see our #70-0176-22.Color:brown Length: 3.8125 inches.

$60.40/ea.
In Stock
Gravel shield anti-squeak

p/n: 70-0462-45

Seal, rear gravel deflector to bumper face bar (staples to gravel deflector), three thirty seconds (3/32) inches by one and three fourths (1-3/4) inch

$59.20/ea.
In Stock
Accelerator pedal pad

p/n: 70-0208-40

Pad, accelerator pedal. Black rubber. For brown see our #70-0208-89. Made to slip over old metal core after removing old rubber.Length: 8.25 inches.

$57.90/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Window pinchweld seal

p/n: 70-0096-52

Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.

$54.40/ea.
In Stock
Gearshift knob

p/n: 30-0153-24

Knob, gearshift. Rubber only for flanged top nut on gearshift lever.

$52.80/ea.
In Stock
Front and rear bumper spacer

p/n: 70-0184-30

Spacer or mute, front and rear bumper mounting bar to gravel deflector. Fully molded rubber. Two and nine sixteenths inch (2-9/16") outside length by seven eighths inch (7/8") width by thirteen sixteenths inch (13/16") height.

$52.40/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Gravel shield anti-squeak

p/n: 70-0461-45

Gasket strip, rear valance on gravel shield to body. One thirty seconds (1/32) inch by one and three fourths (1-3/4) inch by six (6) foot. Customer to cut bolt clearance as needed.

$51.80/ea.
Made to Order Takes 2-3 Days
Fresh air intake plug

p/n: 70-0187-31

Gasket, firewall opening for fresh air intake.

$50.90/ea.
In Stock
Taillight lens gasket

p/n: 70-1213-15

Gasket, taillight lens. For the main pad order our #70-1212-15.Length: 6.875 inches.

$50.00/pr.
In Stock
Hood bumper

p/n: 70-0409-42

Bumpers, hood top panel at cowl. One half (1/2) inch by one half (1/2) inch by three and one fourth (3-1/4) inch. Held in place by screws. Two (2) to four (4) per car as required.

$48.30/pr.
In Stock
Brake and clutch pedal pad

p/n: 70-0176-22

Pads, brake and clutch pedals. Black rubber. For brown see our #70-0176-89.

$47.60/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

Gasket, windshield center post, "H" section, properly sized, requires fitting to top and bottom, not drilled.

$45.30/ea.
In Stock
Brake and clutch shank seal

p/n: 70-0192-23

Grommets, clutch and brake pedal shank. Hollow accordion action type, not a sponge ring.

$44.70/pr.
In Stock
Cowl vent hose

p/n: 50-0259-54

Hose, cowl vent gutter drain.Length: 7.0 inches.

$44.00/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Door weatherstrip

p/n: 60-0114-73

Weatherstrip, door bottom, sponge constant section, solid skin surface, superior quality. Sold in six (6) foot strips only.Length: 72.0 inches.

$41.60/ea.
In Stock
Cowl vent hose

p/n: 60-0457-54

Hose, cowl vent drain. Seems to be correct for some models rather than our #50-0259-54.

$41.00/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Coil wire sleeve

p/n: 70-0546-21

Nipple, coil wire to distributor at coil end.

$37.00/ea.
In Stock
Firewall grommet

p/n: 70-0185-20

Grommet, firewall, main wiring harness plus up to five (5) accessory wires.

$34.80/ea.
In Stock
Trunk hinge mounting pad

p/n: 70-1231-87

Mounting pads, trunk hinge. Four (4) piece set.Length: 8.8125 inches.

$32.80/set
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Exhaust system hanger

p/n: 70-0631-27

Insulator, exhaust system, muffler pipe bracket. Also intermediate pipe bracket on extra-long body styles. Two (2) required per car, most models.

$24.80/ea.
In Stock
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$23.90/ea.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$22.40/ea.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$22.00/ea.
In Stock
Antenna mount pad

p/n: 70-0392-19

Mounting pad, vacuum operated fender mounted antenna with one and one half (1-1/2) inch base.

$21.30/ea.
In Stock
Hood rest roller

p/n: 70-0196-42

Roller, hood rear center rest.

$21.30/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Ferrule and grommet kit

p/n: 70-0597-69

Ferrule and grommet set, outside door handle. Cadmium plated ferrule with rubber sleeve. Two (2) piece set for one (1) door.

$18.60/set
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Lower suspension arm dust seal

p/n: 70-0625-32

Dust seal, lower suspension arm bushing. Four (4) required per car.

$17.50/ea.
In Stock
Firewall grommet

p/n: 70-0198-20

Grommet, firewall, parking brake cable, has three eighths (3/8) inch angular hole through one and one fourth (1-1/4) inch diameter grommet.

$16.70/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Stabilizer grommet

p/n: 70-0221-33

Grommet, rear stabilizer bar (angular sway bar). Four (4) required per car. Fully molded rubber. One and three fourths inch (1 3/4") outside diameter by five eighths inch (5/8") inside hole diameter by three fourths inch (3/4") circular base height by one

$15.40/ea.
In Stock
Hood rest pad

p/n: 70-0139-42

Pad, hood rest (hood bumper). In years 1941-47 purchase six (6) per car. In year 1948-1949 purchase two (2) per car.

$14.20/ea.
In Stock
Body mounting pad

p/n: 70-0235-48

Pad, body mounting. Fully molded rubber with locating collar. Rectangular shaped. Three inches (3") length by two inches (2") width by fifteen sixteenths inch (15/16") locating collar outside diameter by one half inch (1/2") inside hole diameter. Three ei

$14.00/ea.
In Stock
Lower suspension arm dust seal

p/n: 70-0624-32

Dust seal, "O" ring. Lower suspension arm pin bushing. Four (4) required per car.Height: .25 inches.

$13.20/ea.
In Stock
Shock absorber bushing

p/n: 70-0545-33

Bushing, rear shock absorber link, upper and lower end. Seven eighths (7/8) inch outside diameter, nine sixteenths (9/16) inch inside diameter, thirteen sixteenths (13/16) inch long. Four (4) per car.

$12.10/ea.
In Stock
Floor Pan Plug

p/n: 35-0576-45

Plug, floor pan, oval, self-retaining, fits one fourth (1/4) inch by nine sixteenths (9/16) inch hole. Width: .75 inches.

$11.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$10.60/ea.
In Stock
Hood lock pad

p/n: 70-0188-42

Grommet pad, hood lock pilot.

$10.50/ea.
In Stock
Body mounting pad

p/n: 50-0131-48

Pad, body mounting. Fully molded rubber with locating collar. Two inch (2") square by thirteen sixteenths inch (13/16") locating collar outside diameter by one half inch (1/2") locating collar inside diameter. Three eights inch (3/8") square base height b

$9.90/ea.
In Stock
Rear spring bushing

p/n: 70-0182-32

Bushing, rear spring and shackle, lower. Requires 8 per car.

$9.40/ea.
In Stock
Door lock mounting pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$9.10/pr.
In Stock
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$7.90/ea.
In Stock
Shift lever bushing

p/n: 70-2026-26

Bushing, lower shift levers and adjustable eye. Includes metal tube bearing. Used on transmission shifter rods.

$7.90/ea.
In Stock
Firewall plug

p/n: 32-1215-20

Plug, firewall access hole, for wire, cable, tubes, etc. in firewall. Sheet Metal Hole: 1" Large Hole: 1/4" Small Hole: 1/8" Outside Diameter: 1-5/16" Slot Width: 1/16"

$7.80/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Body mounting pad

p/n: 70-0264-48

Cushion, body bolts under washer below bracket. Fully molded rubber. One and one half inch (1 1/2") inch outside diameter by seventeen thirty seconds inch (17/32") inside hole diameter by one fourth inch (1/4") height.

$7.40/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Firewall plug

p/n: 35-1214-20

Plug, firewall access hole, for unused holes in firewall.

$6.90/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock
Wiring grommet

p/n: 32-0464-15

Grommet, taillight wires through inner wheel housing. Sheet Metal Hole: 1" Center Hole: 3/8" Outside Diameter: 1-3/8" Slot Width: 1/16"

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Front fender dust shield clip

p/n: 70-0681-44

Clip, front fender dust shield filler to frame. Spring tempered wire, to original configuration. Up to sixteen (16) per car required.Width: 3.0 inches.

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Radiator panel bumper

p/n: 33-0189-31

Bumper, lower radiator panel to grille, four (4) per car. Also used on radiator valance, two (2) per car in year 1941 only. Compare with our #33-0211-31. Also used as a bumper, hood tip panel to grille. Use 10 per car for 1939-1940 models. Use 8 per car

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.80/ft.
In Stock
Firewall plug

p/n: 35-0197-31

Plug, unused heater tube punch out in firewall.

$5.80/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.49/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.40/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Glovebox link bumper

p/n: 70-1459-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .3125 inches. Height: .4375 inches.

$5.10/ea.
In Stock