Search Results

76 items found matching 1941 Chevrolet Panel Truck 2 door Panel Truck
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Transmission mount service

p/n: 60-0647-24

Mount, transmission support. Revulcanization service only.

$151.90/ea.
Call or Email
Front Door Weatherstrip Kit

p/n: 90-0151-72

Front door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.

$134.00/set
In Stock
Rear Window Gasket Set

p/n: 60-0576-81

This rear window gasket set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$107.30/pr.
Made to Order Takes 2-3 Days
Windshield division bar gasket

p/n: 60-0128-52

Retainer, windshield division bar molding. Inner and outer. With threaded brass core as original (molding not included). Two (2) piece set.

$80.50/set
In Stock
Windshield Weatherstrip

p/n: 60-0447-50

This swing-out windshield gasket is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$78.10/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front spring bumper

p/n: 60-0393-32

Bumper, front spring axle-to-frame.

$68.30/pr.
Made to Order Takes 1-2 Days
Side Window scraper seal

p/n: 60-0566-58

Weatherstrip, door window scraper seal, inner and outer. Slides into grove on top of the door's window opening and wipes the glass when window is raised and lowered. Customer will have to trim to length for proper fit. Four (4) piece set.

$67.90/set
In Stock
Rear spring bumper

p/n: 60-0137-32

Bumper, rear spring. Fits original retainer.Width: 2.5625 inches.

$66.40/pr.
In Stock
Front bumper grommet

p/n: 60-0045-28

Grommet, front bumper. Fully molded rubber. Five and one fourths inch (5-1/4") outside length by two and one eighths inch (2-1/8") outside width by one and five eighths inch (1-5/8") inside hole length by seven sixteenths inch (7/16") inside hole width by

$64.90/pr.
In Stock
Rear bumper grommet

p/n: 60-0127-28

Grommets, rear bumper, right and left. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and one sixteenth inch (2-1/16") outside width by one and three fourths inch (1-3/4") inside hole length by five sixteenths inch (5/16"

$62.80/pr.
Made to Order Takes 1-2 Days
Swing-out Windshield Weatherstrip

p/n: 40-0018-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$62.70/ea.
In Stock
Access hole plug

p/n: 60-0016-24

Cover, brake master cylinder filler and inspection hole. Metal core as original.

$56.30/ea.
In Stock
Axle rebound pad

p/n: 70-2301-32

Cushion, overload spring bumper. Fully molded rubber part that installs in overload spring arm.

$55.50/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Hood corner pad

p/n: 60-0118-42

Pad. hood corner, steel core as original, front and rear.Length: 1.5 inches.

$52.90/pr.
In Stock
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Five eights (5/8) inch wide, six (6) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications without vent window use a six (6) foot strip. Application

$49.10/ea.
In Stock
Headlight door to lens seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Steering column grommet

p/n: 60-0341-32

Grommet, steering column at floor.Length: 3.375 inches.

$44.00/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Cowl vent gasket

p/n: 60-0081-54

Gasket, cowl vent. These parts are made of the highest quality and authenticity.Length: 15.0 inches.

$36.70/ea.
In Stock
Hood to cowl weatherstrip

p/n: 60-0056-42

Anti-squeak, hood to cowl. Five eighths (5/8) inch by seven thirty seconds (7/32) inch. One eight (8) foot strip per vehicle.Length: 96.0 inches.

$35.40/ea.
In Stock
Gearshift seal

p/n: 60-0471-24

Seal, gearshift at floor. See our #60-0397-24 for 4 speed transmission.

$34.30/ea.
In Stock
Gearshift seal

p/n: 60-0397-24

Seal gearshift at floorboard. Sponge rubber, one half (1/2) inch thick. One required per vehicle.Length: 6.5 inches. Width: 6.5 inches. Height: .50 inches.

$33.40/ea.
Made to Order Takes 2-3 Days
Fuel neck grommet

p/n: 60-0049-41

Grommet, fuel filler neck with proper retaining flange. Oval style. Three and three fourths inch (3-3/4) outside width by four and one half inch (4-1/2") outside length by three fourths (3/4") inch height. Two and one sixteenth inch (2 1/16") top hole wi

$31.20/ea.
In Stock
Handbrake seal

p/n: 60-0396-24

Seal, handbrake at floorboard. Rubber sponge, one (1) required per vehicle.Length: 4.50 inches. Width: 2.0 inches. Height: 1.25 inches.

$30.10/ea.
Made to Order Takes 2-3 Days
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$28.80/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Stabilizer bushing

p/n: 60-0317-33

Bushing, link, front stabilizer shaft support. Molded rubber with heavy duty metal sleeve. Six (6) required per vehicle. One and one eighths inch (1 1/8") outside diameter by one half inch (1/2") inside hole diameter by one and one eighths (1 1/8") height

$27.60/ea.
In Stock
Brake And Clutch Pedal Bumper

p/n: 60-0104-24

Bumper, brake and clutch pedal shank, rides under floorboard. One and one eighth (1-1/8) inch clearance for pedal shaft. Compare with our #60-0579-24.

$26.70/pr.
Made to Order Takes 1-2 Days
Door weatherstrip

p/n: 60-0047-73

Weatherstrip, lower door. Fastens to cab threshold. Two strips thirty six (36) inch long each.Length: 36.0 inches. Width: .4375 inches.

$23.90/pr.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$22.00/ea.
In Stock
Door alignment pad

p/n: 70-1821-71

Wedge pads, door aligning.Length: 1.125 inches. Width: .5 inches. Height: .875 inches.

$21.50/pr.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$20.20/ea.
In Stock
Brown steering column cushion

p/n: 60-0012-89

Grommet, steering column to cowl, for U-bolt clamp. Brown rubber. For black see our #60-0012-36.Color:brown Height: 1.25 inches.

$19.60/ea.
In Stock
Steering column cushion

p/n: 60-0012-36

Grommet, steering column to cowl, for U-bolt clamp. Black rubber. For brown see our #60-0012-89.Height: 1.25 inches.

$18.90/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Ferrule and grommet kit

p/n: 70-0597-69

Ferrule and grommet set, outside door handle. Cadmium plated ferrule with rubber sleeve. Two (2) piece set for one (1) door.

$18.60/set
In Stock
Clutch pedal bumper

p/n: 60-0355-24

Bumper, clutch pedal shank under floorboard. Some commercial and utility models, compare with our #60-0104-24.

$18.00/ea.
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Parking light grommet

p/n: 60-0452-17

Grommet, parking light wiring harness through fender.Length: 3.25 inches.

$16.30/pr.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Firewall grommet

p/n: 32-0196-21

Grommet, wire harness through firewall. Sheet Metal Hole: 1-5/16" Center Hole: 5/16" Outside Diameter: 1-11/16" Slot Width: 1/16"

$15.50/ea.
In Stock
Firewall grommet

p/n: 60-0057-21

Grommet, wiring harness through firewall, for one and one fourth (1-1/4) inch hole in sheet metal.Height: .75 inches.

$15.10/ea.
In Stock
Starter pedal bellows

p/n: 60-0210-21

Bellows, starter pedal shaft to floorboard. Three eighths (3/8) inch top hole with three (3) inch height.Width: 2.875 inches. Height: 3.0 inches.

$13.00/ea.
In Stock
Parking light lens gasket

p/n: 60-0470-17

Gasket, parking light lens. One and one half (1-1/2) inch by four (4) inch.1941: All commercial and utility 1942: Most models Length: 4.0 inches.

$12.00/pr.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Door bumper

p/n: 60-0048-71

Bumper, door side. Five eighths (5/8) inch by seven eighths (7/8) inch by one and seven sixteenths (1-7/16) inch. Two (2) door.

$9.90/ea.
In Stock
Windshield bumper

p/n: 34-0258-52

Bumper (stop), swing out windshield against dash. Steel core, nine sixteenths (9/16) inch diameter by five sixteenths (5/16) inch thick. Replaces #3681093. Two (2) per vehicle.

$9.10/pr.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$7.90/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.30/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.00/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Run Channel Clip

p/n: 60-0374-58

Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.

$4.60/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall Grommet

p/n: 32-0064-21

Grommet, vacuum line through firewall. Fits thirteen sixteenths (13/16) inch hole in sheet metal.

$3.40/ea.
In Stock
Shock Absorber Arm Bushing

p/n: 60-0216-33

Bushing, for double acting shock absorber arm link. Height: .78125 inches.

$2.60/ea.
In Stock
Hood bumper

p/n: 33-0449-42

Bumper, hood side panel.

$2.50/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock