Search Results
Front Door Vent Window Kit
p/n: 90-0439-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. The main seals are molded in the shape of the window and designed from original parts for superior fitment and seal.
Front Door Vent Window Weatherstrips
p/n: 20-1616-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are molded in the shape of the window and designed from original parts for superior fitment and seal.
Windshield Gasket
p/n: 20-1604-50
This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.
Windshield Gasket
p/n: 20-1605-50
This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Door Weatherstrip Kit
p/n: 20-1653-72
This front Door Weatherstrip Kit is designed from the original part for superior fitment and seal. This set contains the primary door / door edge to body perimeter weatherstripping.
Trunk Weatherstrip
p/n: 20-1686-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Front Door Vent Window Kit
p/n: 90-0438-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. The main seals are molded as a straight piece and designed from original parts for superior fitment and seal.
Front Door Vent Window Weatherstrips
p/n: 20-1614-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are molded as a straight piece and designed from original parts for superior fitment and seal.
Body to frame webbing
p/n: 20-1599-48
Webbing, body to frame. Two (2) inch wide, twenty five (25) foot long roll.
Fenderskirt edge seal
p/n: 20-0111-44
Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.
Flexible Run Channel
p/n: 20-1619-58
Channel, side window glass, vertical run. Flexible, felt lined, rubber covered channel. Available 60" lengths.
Flexible Run Channel
p/n: 20-1146-58
Channel, flexible door window run. Stainless steel beaded. Available in 5ft lengths.
Rear Window Gasket
p/n: 20-1668-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Fender Welting
p/n: 20-1590-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Thirty (30) foot roll.
Motor mount kit
p/n: 20-1978-11
Kit, motor mount. Enough for one motor mount. Kit includes one (1) each of 78-6029-A, B-6038-C, 78-6048-A, B-6039-A, and B-6047.
Trunk Weatherstrip
p/n: 20-1688-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Door weatherstrip
p/n: 20-1645-73
Weatherstrips, top of door. Mounts on body from approximately just above the hinge to near the beltline on the lock side of the car. Each door opening strip is made from top quality closed cell sponge rubber approximately 54 inches long.
Glovebox Door Bumper Stops
p/n: 20-1698-88
Bumper stops for the glovebox door - lower. Rubber Coated Steel like original. This part prevents the glovebox door from opening too far, reduces paint-chipping.
Steering column floorplate
p/n: 20-1694-88
Seal, steering column tube. Installs on top of floor mat.
Cowl Lacing Rubber Seal Kit
p/n: 20-1587-42
This rubber Cowl Lacing is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body to seal between the firewall and hood.
Door weatherstrip
p/n: 20-1647-73
Weatherstrips, closed car back of door. Vertical section on lock side of door.
Door Check Link Rod End Stop
p/n: 20-1640-70
This Door Check Link Rod End Stop is designed from the original part for superior fit and function. This door stop fits between the door and body to limit the swing opening of the door preventing overtravel. Door check arm and bumper. Enough for one door.
Motor Mount
p/n: 20-1538-11
Front or rear upper motor mount. Useage: Front motor mount for 1932-1947 Ford Trucks with 6 and 8 cylinders. Front motor mount for 1948-1951 Ford Trucks F-1, F-2, F-3. Two (2) required for trucks. Also used for 1932-1948: Ford & Mercury cars as a front
Vent division bar weatherstrip
p/n: 20-0469-56
Front vent window division post seal. Extruded rubber strip only that will have to be attached to division post.
Motor mount
p/n: 20-1539-11
Mount, front motor. Lower.Ford Truck 1932-47: All Ford Trucks, 2 each required. 1948-51: Ford F100 Series both 6 or 8 cylinder, 1 each required.
