Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

69 items found matching 1941 Plymouth Special Deluxe P12 2 door Club Coupe
Windshield Gasket

p/n: 40-0274-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$218.99/ea.
In Stock
Front Door Vent Window Kit

p/n: 90-0449-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$211.69/set
Kit
Front Door Vent Window Weatherstrips

p/n: 40-0123-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$200.59/pr.
In Stock
Suspension arm bumper

p/n: 40-0384-32

Bumper, front or rear axle. Revulcanization service only.

$153.89/pr.
Call or Email
Quarter window weatherstrip

p/n: 40-0256-77

Weatherstrip, fixed quarter window. Vulcanized into continuous ring.

$142.69/pr.
In Stock
Motor mount service

p/n: 40-0411-11

Insulator, rear engine support, upper. Revulcanization service only.

$141.99/pr.
Call or Email
Rear Window Gasket

p/n: 40-0275-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$141.99/ea.
In Stock
Steering column cushion

p/n: 40-0422-36

Insulator set, steering housing to frame. Set includes both inner and outer pieces.Length: 4.125 inches.

$119.59/set
In Stock
Upper control arm service

p/n: 70-1931-32

Bumper, upper control arm. Revulcanization service only.

$109.99/pr.
Call or Email
Motor mount service

p/n: 40-0410-11

Front motor mount. Revulcanization service only. Send in core and allow three weeks for service. 6 cylinders only.

$107.89/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$97.99/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0121-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.

$80.99/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0107-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.

$74.99/pr.
In Stock
Parking light lens gasket

p/n: 70-1569-16

Gasket, parking light lens.Length: 4.0 inches.

$67.39/pr.
Made to Order Takes 1-2 Days
Brake and clutch pedal pad

p/n: 40-0107-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0107-89. Full slip over type to fit old pedal.

$66.89/pr.
Made to Order Takes 1-2 Days
Swing-out Windshield Weatherstrip

p/n: 40-0018-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$65.29/ea.
In Stock
Brake and clutch pedal pad

p/n: 40-0121-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0121-89. Oval style, perfect copy.

$61.99/pr.
In Stock
Cowl vent gasket

p/n: 40-0271-54

Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.

$55.49/ea.
In Stock
Fuel neck grommet

p/n: 40-0043-39

Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.

$55.49/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0217-24

Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.

$52.49/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Side Window Weatherstrip

p/n: 30-0244-57

Window felt inner and/or outer. Flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.

$46.79/pr.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$41.39/pr.
In Stock
Front coil spring pad

p/n: 40-0457-32

Front coil spring pad

$40.59/pr.
In Stock
Brown starter button cover

p/n: 40-0419-89

Pad, starter button. Made with brown rubber like original.

$36.29/ea.
Made to Order Takes 1-2 Days
Accelerator rod seal

p/n: 40-0205-88

Seal, accelerator rod through floorboard.

$33.59/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$31.99/pr.
In Stock
Firewall grommet

p/n: 40-0222-21

Grommet, firewall, for throttle cable, wiper vacuum line and cowl vent drain hole. Three (3) holes (9/16", 3/8", 1/4").

$31.99/ea.
In Stock
Firewall grommet

p/n: 40-0221-21

Grommet, firewall, for speedometer cable, oil tube, temp. tube, 3 holes (5/16", 1/4", 3/16").

$31.19/ea.
In Stock
Firewall grommet

p/n: 40-0223-21

Grommet, firewall, plain (no holes), for various uses.

$28.29/ea.
Made to Order Takes 1-2 Days
Starter rod boot

p/n: 40-0472-89

Seal, starter through floorboard.

$27.19/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0098-52

Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. For seventeen (17) inch to (20) inch lengths. Gasket length: 20 inches, trim to fit.

$26.69/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-1432-56

Vent window division post seal. Single approximate 32 inch strip of original cross section extruded rubber that must be cut in half to complete a pair for both the driver and passenger side door vents. To install this part, one typically uses an ad

$22.29/ea.
In Stock
Steering column cushion

p/n: 40-0259-36

Pad, steering post bracket. One (1) per car. Cushions steering post clamp to instrument panel.Length: 3.50 inches.

$21.29/ea.
Made to Order Takes 1-2 Days
Trunk bumper

p/n: 70-1659-87

Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.

$20.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Hood support rod top cap

p/n: 40-0346-42

Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.

$19.49/ea.
In Stock
Body mounting pad

p/n: 40-0232-48

Pad, body mounting, upper. Fully molded rubber with locating collar. As many as twelve (12) used per car. One and fifteen sixteenths inch (1 15/16") outside width by two inch (2") outside width. See drawing for more dimensions.

$19.19/ea.
In Stock
Steering gear bushing

p/n: 40-0130-36

Bushing, insulator, for steering gear arm. Four (4) required per car.

$18.39/ea.
In Stock
Heater core tube grommet

p/n: 40-0444-88

Grommet, heater core tube to dash, lower.

$14.59/ea.
In Stock
Body mounting pad

p/n: 40-0233-48

Pad, body mounting, lower. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") outside width by one and fifteen sixteenths inch (1 15/16") outside length by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height.

$14.49/ea.
In Stock
Body mounting pad

p/n: 40-0231-48

Pad, body mounting, upper. Fully molded rubber with locating collar. One and fifteen sixteenths inch (1 15/16") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") inside locating hole diameter. Three eig

$13.19/ea.
In Stock
Door Bumper

p/n: 70-2292-70

Steele Rubber Products has the best quality door bumpers for your Street Rod or Custom Build project. Excellent for use in many applications.

$12.99/ea.
In Stock
Body mounting pad

p/n: 40-0230-48

Pad, body mounting, lower. Fully molded rubber. One and eleven sixteenths inch (1 11/16") outside diameter by nine sixteenths inch (9/16") inside hole diameter by one half inch (1/2") height.

$11.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock