Search Results

68 items found matching 1946 Chrysler Town and Country 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Kit

p/n: 90-0355-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$230.20/set
$218.70/set
5% discount
Kit
Windshield Gasket

p/n: 40-0246-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$213.70/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 40-0264-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$209.60/pr.
In Stock
Hinge post weatherstrip

p/n: 70-1769-73

Weatherstrip, body hinge pillar, lower (front door).Length: 10.125 inches.

$171.20/pr.
In Stock
Motor mount service

p/n: 40-0491-11

Support, upper engine rear. Revulcanization service only.

$150.30/pr.
Call or Email
Suspension arm bumper

p/n: 40-0384-32

Bumper, front or rear axle. Revulcanization service only.

$149.30/pr.
Call or Email
Windshield Gasket Weatherstrip

p/n: 40-0054-52

This window gasket weatherstrip can be used to seal the windshield, rear quarter windows, or rear window. It comes in a twelve foot (12') strip and is designed for car with reveal molding.

$121.50/ea.
In Stock
Windshield Gasket Weatherstrip

p/n: 40-0053-52

This window gasket weatherstrip can be used to seal the windshield, rear quarter windows, or rear window. It comes in a twelve foot (12') strip and is designed for car without reveal molding or where the chrome lays under the rubber lip.

$121.50/ea.
In Stock
Motor mount service

p/n: 70-1283-11

Front engine support. Revulcanization service only. Send in core and allow three weeks for service. 8 cylinders only.

$121.40/ea.
Call or Email
Upper control arm service

p/n: 70-1931-32

Bumper, upper control arm. Revulcanization service only.

$106.70/pr.
Call or Email
Motor mount service

p/n: 40-0410-11

Front motor mount. Revulcanization service only. Send in core and allow three weeks for service. 6 cylinders only.

$104.70/ea.
Call or Email
Brown carpet heel plate

p/n: 40-0190-89

Heel pad. Brown rubber. For black see our #40-0190-88. To protect driver's side floor carpet.

$102.60/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.10/ea.
In Stock
Carpet heel plate

p/n: 40-0190-88

Heel pad. Black rubber. For brown see our #40-0190-89. To protect driver's side floor carpet.

$89.70/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0121-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.

$77.80/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Taillight mounting pad

p/n: 40-0392-15

Pad, brake light. Mounts on center of trunk lid.Length: 13.125 inches.

$73.00/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0107-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.

$72.00/pr.
In Stock
Rear bumper grommet

p/n: 40-0468-30

Grommets, rear bumper. Fully molded rubber, used on rear side brackets only. Four and seven eighths inch (4-7/8") outside length by three and three sixteenths inch (3-3/16') outside width by one and fifteen sixteenths inch (1-15/16") inside hole length by

$70.50/pr.
In Stock
Brake and clutch pedal pad

p/n: 40-0107-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0107-89. Full slip over type to fit old pedal.

$64.20/pr.
Made to Order Takes 1-2 Days
Swing-out Windshield Weatherstrip

p/n: 40-0018-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$62.70/ea.
In Stock
Motor mount

p/n: 70-2577-11

Cushion, engine lower support. One (1) pair required per car.

$61.40/pr.
In Stock
Taillight mounting pad

p/n: 40-0240-15

Mounting pad, taillight.Length: 9.25 inches.

$60.90/pr.
In Stock
Fresh air gasket

p/n: 70-1768-31

Seal, fresh air adaptor door. Part of assembly #903964. For vehicles with accessory air control systems.

$59.90/ea.
Made to Order Takes 1-2 Days
Brake and clutch pedal pad

p/n: 40-0121-22

Pads, brake and clutch pedal. Black rubber. For brown see our #40-0121-89. Oval style, perfect copy.

$59.50/pr.
In Stock
Cowl vent gasket

p/n: 40-0271-54

Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.

$53.30/ea.
In Stock
Fuel neck grommet

p/n: 40-0043-39

Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.

$53.30/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0217-24

Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.

$50.40/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Side window weatherstrip

p/n: 30-0244-57

Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.

$43.20/pr.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
License lens gasket

p/n: 70-2276-16

Gasket, license light lens. Fully molded with proper details.Length: 3.0 inches. Width: 1.6875 inches.

$39.60/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$38.20/pr.
In Stock
Front coil spring pad

p/n: 40-0457-32

Front coil spring pad

$37.50/pr.
In Stock
Windshield division bar gasket

p/n: 70-0098-52

Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. Seventeen (17) inch to (20) inch lengths.Length: 20.

$24.60/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-1432-56

Vent window division post seal. Single approximate 32 inch strip of original cross section extruded rubber that must be cut in half to complete a pair for both the driver and passenger side door vents. To install this part, one typically uses an ad

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Hood support rod top cap

p/n: 40-0346-42

Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.

$18.00/ea.
In Stock
Body mounting pad

p/n: 40-0232-48

Pad, body mounting, upper. Fully molded rubber with locating collar. As many as twelve (12) used per car. One and fifteen sixteenths inch (1 15/16") outside width by two inch (2") outside width. See drawing for more dimensions.

$17.70/ea.
In Stock
Steering gear bushing

p/n: 40-0130-36

Bushing, insulator, for steering gear arm. Four (4) required per car.

$16.90/ea.
In Stock
Heater core tube grommet

p/n: 40-0444-88

Grommet, heater core tube to dash, lower.

$13.40/ea.
In Stock
Body mounting pad

p/n: 40-0233-48

Pad, body mounting, lower. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") outside width by one and fifteen sixteenths inch (1 15/16") outside length by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height.

$13.30/ea.
In Stock
Body mounting pad

p/n: 40-0231-48

Pad, body mounting, upper. Fully molded rubber with locating collar. One and fifteen sixteenths inch (1 15/16") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") inside locating hole diameter. Three eig

$12.10/ea.
In Stock
Body mounting pad

p/n: 40-0230-48

Pad, body mounting, lower. Fully molded rubber. One and eleven sixteenths inch (1 11/16") outside diameter by nine sixteenths inch (9/16") inside hole diameter by one half inch (1/2") height.

$11.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door opening step grommet

p/n: 40-0125-49

Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).

$9.00/ea.
In Stock
Dense Rubber Extrusion

p/n: 40-0054-99

Windshield, rear window and rear fixed quarter window weatherstrip. Used on cars with chrome reveal molding where the reveal molding lays over the pinchweld seal. Vehicles typically need 12 foot for windshield, and 8 foot for either the rear window and q

$8.10/ft.
In Stock
Spring shackle bushing

p/n: 40-0183-32

Bushing, spring and shackle, front and rear leaf springs. Eight (8) or twelve (12) required per car.Length: 1.25 inches. Height: 1.25 inches.

$7.40/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.60/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0356-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
Dense Rubber Extrusion

p/n: 40-0053-99

Windshield, rear window and rear fixed quarter window weatherstrip. Typically used on cars without chrome reveal molding or others where reveal molding lays under the rubber lip. Vehicles typically need 12 foot for windshield, and 8 foot for either the re

$6.20/ft.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Hood Bumper

p/n: 33-0395-42

Bumper, hood to fender ledge. Up to ten (10) used per car.

$2.30/ea.
In Stock