Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

88 items found matching 1947 Packard Custom Super Clipper 4 door Sedan - 7 Passenger
Front Door weatherstrip

p/n: 90-0144-72

Weatherstrip, front door kit. Includes the sides, top and bottom of door seal with molded corners and the front door hinge pillar seal.

$306.19/set
In Stock
Rear quarter vent weatherstrip

p/n: 30-0493-77

Weatherstrip, rear quarter vent window.

$270.19/pr.
Made to Order Takes 1-2 Days
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$260.29/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0328-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$242.99/set
Kit
Rear door vent weatherstrip

p/n: 30-0118-74

Rear door vent window rubber. Order our #30-0347-74 division post seal separately.

$213.49/set
In Stock
Door weatherstrip

p/n: 30-0351-73

Weatherstrip, front door hinge pillar, right and left. All original features (except made without steel core). Ultra soft neoprene.Length: 35.0 inches.

$208.99/pr.
Made to Order Takes 1-2 Days
Windshield Gasket

p/n: 30-0345-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.89/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 30-0117-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$203.49/set
In Stock
Rear Window Gasket

p/n: 30-0488-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$184.79/ea.
In Stock
Motor mount service

p/n: 30-0415-11

Motor mount. Revulcanization service only.

$149.49/pr.
Call or Email
Spring eye bushing

p/n: 30-0372-32

Bushing, rear spring eye leaf and shackle. Nine sixteenths (9/16) inch inside diameter, one and three eighths (1-3/8) inch barrel.

$148.89/set
Made to Order Takes 1-2 Days
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$138.39/ea.
In Stock
Steering column grommet

p/n: 70-2523-36

Grommet, steering column to dash at floorboard. Fully molded with metal core out of durable black rubber.

$132.49/ea.
In Stock
Axle rebound pad

p/n: 30-0125-32

Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.

$118.39/pr.
Made to Order Takes 1-2 Days
Taillight mounting pad

p/n: 30-0004-15

Pads, taillight mounting. Molded left and right with all details as original. Compare with our #30-0277-15.Length: 8.50 inches. Width: 3.75 inches.

$118.39/pr.
Made to Order Takes 1-2 Days
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$116.89/ea.
Call or Email
Front spring bumper

p/n: 30-0119-32

Bumper, front spring compression, lower arm. Steel core, retained by clip (not included).Height: 2.625 inches.

$110.39/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-2321-42

Weatherstrip, hood-to-cowl.

$109.89/ea.
Made to Order Takes 1-2 Days
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$93.99/ea.
Call or Email
Front spring bumper

p/n: 30-0120-32

Pads, front spring bumper rebound. Self retaining type.

$85.99/pr.
In Stock
Trunk Weatherstrip

p/n: 70-1690-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$85.39/ea.
In Stock
Division bar grommet

p/n: 70-3135-62

Grommet, rear door vent divider post. Upper and lower, right and left. 4 piece set.

$83.49/set
Made to Order Takes 4 Days
Radiator mounting pad

p/n: 30-0121-31

Grommet, radiator cradle to frame tie rod. 1st type, with locating boss. One four (4) piece set required per car. See also our #30-0309-31.

$82.29/set
In Stock
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$81.49/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$77.99/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Rigid Run Channel

p/n: 30-0023-57

Channel, rigid run, for division bar, un-beaded, plush lined, cloth covered, twenty four (24) inches long, channel size one half (1/2) inch outside width

$72.39/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Firewall grommet

p/n: 30-0110-42

Grommets, hood lock link through firewall.

$66.19/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Radiator mounting pad

p/n: 30-0309-31

Grommet, several useages. Radiator core cradle tie rod to frame or rear stablizer pad to link to where the leaf springs are bolted. Fully molded rubber. 2nd type with chamfered edge. Comes as a (4) piece set. One and three eighths inch (1 3/8") outside di

$63.89/set
Made to Order Takes 1-2 Days
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$56.59/pr.
In Stock
Cowl vent gasket

p/n: 30-0262-54

Gasket, cowl vent. Labyrinth style as original.Length: 12.75 inches.

$53.19/ea.
In Stock
Flexible Run Channel

p/n: 70-1108-57

Channel, flexible window run, un-beaded. Cloth covered mohair-lined type. Available in 6ft lengths.

$52.99/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$52.89/set
Made to Order Takes 1-2 Days
Vent division bar weatherstrip

p/n: 30-0346-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$52.39/pr.
In Stock
Vent division bar weatherstrip

p/n: 30-0347-74

Weatherstrip, rear vent window, front edge (on division post) right and left.

$52.39/pr.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
License light mounting pad

p/n: 30-0122-17

Pad, rear license light mounting, with correct dimensions and beading.Length: 8.125 inches.

$47.19/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Side Window Weatherstrip

p/n: 30-0244-57

Window felt inner and/or outer. Flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.

$46.79/pr.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Headlight mounting pad

p/n: 30-0142-14

Gaskets, headlight body mounting to fender. Cut to exact size as original.

$45.19/pr.
In Stock