Search Results
Please click on the part name in red in order to get a complete description.
Body Mounting Pad Kit
p/n: 20-1598-48
Pad kit, body to frame. Twenty five (25) piece set. Installation instructions included.
Body to frame webbing
p/n: 20-1599-48
Webbing, body to frame. Two (2) inch wide, twenty five (25) foot long roll.
Trunk emblem mounting pad
p/n: 50-0114-17
Mounting pad, trunk ornament. Top quality material, finely detailed.Hole to hole this part measures 9.5 inches.Width: 13.875 inches.
Door bumper
p/n: 70-0168-71
Bumper, door side. Square type held by four (4) screws, metal core as original.
Hood to cowl weatherstrip
p/n: 60-0091-42
Seal, side of hood ledge (cowl). Molded with all original details. One (1) pair required per car.Length: 11.0 inches.
Rear Quarter Window Gasket Set
p/n: 60-0092-83
This rear corner quarter window gasket set contains the quarter window gaskets and locking strips. All of the strips in this four (4) piece set come in forty-five inch (45") pieces and mount around the perimeters of the quarter windows on five window trucks. The ends may require trimming and bonding for installation.
Fenderskirt edge seal
p/n: 20-0111-44
Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.
Body anti-squeak 40 inch strip
p/n: 70-1116-45
Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
Window Felt Beltline Weatherstrip
p/n: 20-0471-60
Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Radiator mounting pad
p/n: 30-0309-31
Grommet, several useages. Radiator core cradle tie rod to frame or rear stablizer pad to link to where the leaf springs are bolted. Fully molded rubber. 2nd type with chamfered edge. Comes as a (4) piece set. One and three eighths inch (1 3/8") outside di
Division bar grommet
p/n: 70-0483-62
Grommets, rear door vent divider post (wind deflector), upper and lower, right and left. Four (4) piece set.
Front bow corner filler
p/n: 70-0975-67
Filler, front corner of convertible top front bow. Made from soft durable rubber. Includes separate brass retainers.
Taillight mounting pad
p/n: 12-0007-15
Pad, taillight mounting, symmetrical for right and left, exact copy.
Front Suspension Rubber Bumper
p/n: 60-0103-32
Front Suspension Rubber Bumper for the front suspension lower control arm (attaches to lower arm spring mount). Steel core, with original size bolt. Width: 1.625 inches.
Steering column grommet
p/n: 12-0012-36
Grommet, steering column and shifter at toe board, reproduced with all original details.
Brown brake and clutch pad
p/n: 70-0176-89
Pads, brake and clutch pedals. Brown rubber. For black see our #70-0176-22.Color:brown Length: 3.8125 inches.
Front stabilizer bushing
p/n: 70-0193-33
Bushings, front stabilizer bar. Fully molded rubber. One and five eighths inch (1 5/8") length by one and seven sixteenths inch (1 7/16') width by three fourths inch (3/4") inside hole diameter by one and eleven sixteenths inch (1 11/16") height.
Fresh air gasket
p/n: 70-1768-31
Seal, fresh air adaptor door. Part of assembly #903964. For vehicles with accessory air control systems.
Brake and clutch pedal pad
p/n: 40-0121-22
Pads, brake and clutch pedal. Black rubber. For brown see our #40-0121-89. Oval style, perfect copy.
Brown brake and clutch pad
p/n: 25-0024-89
Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Brown rubber. For black see our #25-0024-22.
Front bow weatherstrip
p/n: 30-0503-65
Weatherstrip, windshield header to front bow, at rear. Correct design extrusion cut fifty five and one half (55-1/2) inch long.Length: 55.5 inches.
Front Stablizer Bar End Link Kit
p/n: 70-0567-34
Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.
Fuel neck grommet
p/n: 25-0013-41
Grommet, fuel filler neck. Virtually exact copy for two and one fourth (2-1/4) inch diameter filler neck through body or fender.
Hood to cowl weatherstrip
p/n: 12-0014-43
Weatherstrip, hood to cowl, high quality sponge, with solid skin. Sixty (60) inch strip.
Parking lamp lens gasket
p/n: 70-3526-16
Gasket, front parking and directional lamp. Fully molded rubber. Includes both right and left sides.
Gravel shield anti-squeak
p/n: 70-0462-45
Seal, rear gravel deflector to bumper face bar (staples to gravel deflector), three thirty seconds (3/32) inches by one and three fourths (1-3/4) inch
Taillight mounting pad
p/n: 60-0008-15
Mounting pads, taillight.Length: 6.50 inches. Width: 2.6875 inches.
Convertible roof rail bumper
p/n: 70-0976-67
Bumper, folding top side roof rail at quarter window. Made with metal core like original.Length: 1.375 inches. Width: 1.625 inches.
Rear Window Gasket
p/n: 60-0082-83
This rear window gasket weatherstrip set contains the rear window gasket itself and the locking strip. Both strips comes in a ninety inch (90") piece and mount around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Brake and Clutch Pedal Pads
p/n: 60-0068-22
Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.
Front Spring Rubber Bumper
p/n: 70-0329-32
Front Spring Rubber Bumper - for upper control arm on frame.
Parking light lens gasket
p/n: 70-2275-16
Gasket, parking light lens. Fully molded, with proper edge lip and shape. One (1) pair needed per car.Length: 4.6875 inches. Width: 2.0625 inches.
Taillight lens gasket
p/n: 70-3524-15
Gasket, taillight lens. Fully molded rubber. Includes both right and left sides.
Door weatherstrip
p/n: 20-1644-73
Weatherstrips, open car door hinge. Door seals molded to fit hinge area.
Brown accelerator pedal pad
p/n: 50-0160-89
Pad, accelerator pedal. Brown rubber. For black see our #50-0160-40. Slip-over type for old core, perfect copy.Color:brown Length: 9.0 inches.
Accelerator pedal pad
p/n: 70-0208-40
Pad, accelerator pedal. Black rubber. For brown see our #70-0208-89. Made to slip over old metal core after removing old rubber.Length: 8.25 inches.
Window Felt Beltline Weatherstrip
p/n: 80-0927-57
An Original equipment style side window horizontal weatherstrip kit (also known as beltline weatherstrip). This four (4) piece kit includes inner and outer felt beltline weatherstrips for each door. They come ready to install with finished ends and body curvature bends for a factory like appearance.
Brake and clutch pedal pad
p/n: 25-0024-22
Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Black rubber. For brown see our #25-0024-89.Length: 3.125 inches.
Access hole plug
p/n: 60-0016-24
Cover, brake master cylinder filler and inspection hole. Metal core as original.
Clutch equalizer bushing kit
p/n: 70-2029-24
Kit, clutch equalizer bushing & seal. Kit includes metal sleeved rubber bushing and molded rubber seals for each end of equalizer.
1935-1974 Cadillac Factory Parts Manual, CD
p/n: 07-1346-07
This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Folding seat bumper
p/n: 70-2576-88
Bumper, front seat back center arm hinge. Excellent finish and details with original style metal core. See our #70-0482-88 for outer seat back bumper.
Axle rebound pad
p/n: 70-2301-32
Cushion, overload spring bumper. Fully molded rubber part that installs in overload spring arm.
Body Anti-Squeak Rubber
p/n: 60-0054-73
Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.
Flexible run channel
p/n: 20-1619-58
Channel, door glass flexible run. Fabric covered bead. Sixty (60) inches long. Measures 9/16” tall x 5/8” wide. Used with 1/4” glass.
Front fender seal
p/n: 60-0522-45
Seal, front fender baffle, right and left. One (1) pair per car. Length: 5.25 inches.
Windshield division bar gasket
p/n: 10-0124-51
Gasket, windshield division bar. Two (2) piece set, inner and outer.Length: 12.0625 inches.
Front Spring Bumper Service
p/n: 10-0133-35
Bumpers, front spring to frame. Vulcanization service only. Width: 1.3125 inches.
Gravel shield anti-squeak
p/n: 60-0020-30
Anti-squeak, rear gravel deflector-to-bumper. Excellent copy of original extrusion. Six (6) foot strip.Width: 1.0 inches.
Window pinchweld seal
p/n: 70-0096-52
Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.
Flexible run channel
p/n: 20-1146-58
Channel, flexible door window run. Stainless steel beaded. Sixty (60) inches long.
Front stabilizer bushing
p/n: 30-0123-33
Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig
Rear coil spring pad
p/n: 50-0359-35
Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.
Hood corner pad
p/n: 70-0914-42
Pad, hood corner. Molded left and right like original.Width: 1.375 inches.
Cowl vent gasket
p/n: 40-0271-54
Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.
Fuel neck grommet
p/n: 40-0043-39
Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.
Rear Window Gasket
p/n: 20-1660-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 20-1668-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Brake and clutch pedal pad
p/n: 12-0013-22
Pads, brake and clutch pedals, perfect copy, top material.
Hinge Seal Set
p/n: 60-0285-69
Seal, back door hinge, outside. A four (4) piece set. Some vehicles require two (2) sets.
Front bow weatherstrip
p/n: 60-0440-64
Weatherstrip, front bow to windshield, outer. Installs on convertible top. Approximately four (4) foot ten (10) inches long.
Accelerator pedal service
p/n: 60-0701-40
Pedal, accelerator. Revulcanization service only. Excellent cover detailing with molded in rod ball socket as original.
Engine Mount - Rear
p/n: 20-0421-11
Engine Mount - Rear, Ford Truck 1942-52 Mount, rear motor. Both 6 & 8 cylinder models. Replaces factory #21A-6068. Fits F-1 models. 1 ea. required.
Gearshift boot
p/n: 20-0334-26
Boot, floor mounted gear shift. Black.Width: 4.0 inches. Height: 5.0 inches.
Taillight lens gasket
p/n: 70-2140-15
Gasket, trunk center medallion trunk stop lamp lens. Proper construction with accurate lips for good sealing.Length: 1.375 inches. Width: 4.0625 inches.
Accelerator pedal pad
p/n: 50-0160-40
Pad, accelerator pedal. Black rubber. For brown see our #50-0160-89. Slip-over type for old core, perfect copy.Length: 9.0 inches.
Brown seat back rest pad
p/n: 70-0482-89
Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.
Brown steering column grommet
p/n: 60-0621-89
Grommet, steering column to toe board. Brown rubber. For black see our #60-0621-36.Color:brown Length: 4.25 inches.
Headlight Door To Lens Seal
p/n: 70-0493-14
Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.
Rigid Run Channel
p/n: 70-0347-58
Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.
Gravel shield anti-squeak
p/n: 70-0461-45
Gasket strip, rear valance on gravel shield to body. One thirty seconds (1/32) inch by one and three fourths (1-3/4) inch by six (6) foot. Customer to cut bolt clearance as needed.
Taillight lens gasket
p/n: 70-1213-15
Gasket, taillight lens. For the main pad order our #70-1212-15.Length: 6.875 inches.
Ignition cable grommet
p/n: 70-1598-21
Grommet, ignition cable.Length: 2.125 inches. Width: 1.50 inches.
Rear Window Gasket
p/n: 20-0479-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Steering column grommet
p/n: 60-0621-36
Grommet, steering column to toe board. Black rubber. For brown see our #60-0621-89.
Flexible Run Channel
p/n: 70-1108-57
Channel, flexible window run, un-beaded. Five eights (5/8) inch wide, six (6) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications without vent window use a six (6) foot strip. Application
Motor snubber pad
p/n: 30-0311-11
Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.
Beltline weatherstrip
p/n: 40-0539-57
Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.
Vent division bar weatherstrip
p/n: 30-0346-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 30-0347-74
Weatherstrip, rear vent window, front edge (on division post) right and left.
Cowl vent gasket
p/n: 12-0011-54
Gasket, cowl vent, molded sponge rubber to original size and configuration.
Hood bumper
p/n: 70-0409-42
Bumpers, hood top panel at cowl. One half (1/2) inch by one half (1/2) inch by three and one fourth (3-1/4) inch. Held in place by screws. Two (2) to four (4) per car as required.
Flexible Run Channel 6 Foot
p/n: 70-1239-58
Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.
Fuel neck grommet
p/n: 60-0401-41
Grommet, fuel filler neck. Fully molded, slightly angled. Four and one fourth inch (4 1/4") inch outside diameter by two and one eighth inch (2 1/8") inside hole diameter by seven eights inch (7/8") height at front by one and one fourth inch (1 1/4") inch
Hinge post weatherstrip
p/n: 30-0381-73
Weatherstrip, right and left hinge side on front door, convertible styles only.Length: 4.875 inches.
Fuel neck grommet
p/n: 12-0001-39
Grommet, fuel filler neck. Fully molded rubber. Three and three fourths inch (3 3/4") outside diameter by one and seven eighths inch (1 7/8") inside diameter by three inch (3") sheet metal opening.