Search Results
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Kit
p/n: 90-0442-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Door Glass Run Channel Kit
p/n: 20-2537-58
Door Glass Run Channel Kit - Kit includes front door side window division bar, run channel, and window felts. Fabric covered division bar and stainless steel window felts. This kit does two (2) doors.
Door Glass Run Channel Kit
p/n: 20-2541-58
Door Glass Run Channel Kit - Kit includes side window division bar, run channel, and window felts. Stainless steel division bars and stainless steel window felts. This kit does two (2) doors.
Front Door weatherstrip
p/n: 20-2595-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Front Door Vent Window Weatherstrips
p/n: 20-2530-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Side window run channel kit
p/n: 20-2539-58
Kit, rear quarter window division bar run channel and window-felt. Fabric covered division bar and stainless steel window-felts.
Side window run channel kit
p/n: 20-2544-58
Kit, rear quarter window division bar run channel and window-felt. Stainless steel division bar and stainless steel window-felts.
Windshield Gasket
p/n: 20-2516-50
This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 20-2616-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 20-2613-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 20-2615-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Fenderskirt edge seal
p/n: 20-0111-44
Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.
Flexible run channel
p/n: 20-1619-58
Channel, door glass flexible run. Fabric covered bead. Sixty (60) inches long. Measures 9/16” tall x 5/8” wide. Used with 1/4” glass.
Flexible run channel
p/n: 20-1146-58
Channel, flexible door window run. Stainless steel beaded. Sixty (60) inches long.
Beltline weatherstrip
p/n: 40-0539-57
Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.
Beltline weatherstrip
p/n: 70-0555-58
Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.
Side window weatherstrip
p/n: 30-0244-57
Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.
Trunk Weatherstrip
p/n: 20-2618-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Vent division bar weatherstrip
p/n: 20-2535-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Engine Mount
p/n: 20-2401-11
Front Engine Mount - Two (2) required per car. Ford only 6 or 8 cylinder engines.
Air ventilator seal
p/n: 20-2965-31
Seals, air vent damper. Must drill out spot welds to replace the cracked rubber. Includes screws to put back together.
Trunk Weatherstrip
p/n: 20-2620-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the lip on the body surrounding the trunk opening.
Steering column floorplate
p/n: 20-1694-88
Seal, steering column tube. Installs on top of floor mat.
Gearshift grommet
p/n: 20-2460-26
Repair kit, gear shift lever grommet. Column shift only. Two (2) kits required.
Door handle gasket
p/n: 20-2587-69
Pads, outside door handle. Enough for two (2) handles. Four (4) piece set.
Front suspension bumper
p/n: 20-2475-32
Bumper, front suspension lower arm. Bumper section is 2" tall and 1-15/16" wide.
Spring shackle bushing kit
p/n: 20-2481-33
Bolt and bushing, front of rear spring. Two (2) kits required per car.
Steering column floorplate
p/n: 20-2646-88
Seal, standard trans. steering post to floor. Installs under metal plate.
Front bumper grommet
p/n: 20-2506-45
Grommets, front stone deflector to bumper arm anti-rattler. Two and one fourth (2-1/4) inch long.
Front suspension bushing
p/n: 20-2474-32
Seal, front suspension lower control arm outer. Four (4) required per car.
Front suspension bushing
p/n: 20-2471-32
Seal, front suspension. Inner upper arm.Qty Required:4 Four (4) required per car.
Glovebox and fuel door bumper
p/n: 20-1220-88
Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.
Wiper control grommet
p/n: 20-2525-53
Gaskets, wiper pivot spacer to body. Replaces factory #8A-17541-A.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Vent Cable Thru Firewall Grommet
p/n: 20-2437-20
Grommet, air vent cable through firewall. One pair required per vehicle.
Front suspension bushing
p/n: 20-2470-32
Seal, front suspension. Inner lower arm.Qty Required:4 Four (4) required per car.
Front suspension bushing
p/n: 20-2473-32
Seal, front suspension outer upper arm. Four (4) required per car.
Shock absorber bushing
p/n: 20-1274-32
Bushing, shock absorber link. May be used for front or rear spring.Chrysler 1951-54 Bushing, rubber, shock absorber link.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
Brake adjustment hole plug
p/n: 70-1092-24
Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.
