Search Results

64 items found matching 1954 Packard Patrician 4 door Limousine
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Front Door weatherstrip

p/n: 90-0148-72

Weatherstrip, front door kit. Includes weatherstrip for door perimeter and hinge pillars.

$291.60/set
In Stock
Rear Window Gasket Set

p/n: 30-0463-81

This rear window gasket set contains the rear window gasket itself and the locking strip. The seal mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$287.40/set
In Stock
Windshield Gasket Set

p/n: 30-0462-50

This windshield gasket set contains the windshield gasket itself and the locking strip. The seal mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$287.40/set
Made to Order Takes 2-3 Days
Rear Window Gasket Set

p/n: 30-0529-81

This rear window gasket set contains the rear window gasket itself and the locking strip. The seal mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$260.10/set
In Stock
Front Door hinge pillar seal

p/n: 30-0466-73

Weatherstrip, front door hinge pillar.

$249.90/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0331-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$237.90/set
$226.00/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 30-0443-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$179.00/pr.
In Stock
Motor mount service

p/n: 30-0442-11

Engine support, front. Revulcanization service only.

$157.80/pr.
Call or Email
Motor mount service

p/n: 30-0528-11

Support, engine mount at rear. Revulcanization service only.

$126.00/ea.
Call or Email
Accelerator pedal service

p/n: 70-3145-41

Pad, accelerator pedal. Revulcanization service only.

$113.60/ea.
Call or Email
Front spring bumper

p/n: 30-0517-32

Bumper, front spring rebound, lower.Width: 2.125 inches. Height: 2.25 inches.

$100.60/pr.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.10/ea.
In Stock
Hood to cowl weatherstrip

p/n: 70-1296-43

Weatherstrip, hood to cowl. Fully molded with carrot-bumper retainers.Width: .625 inches.

$85.70/ea.
In Stock
Division bar grommet

p/n: 70-3132-62

Grommets, rear door vent divider post, upper and lower, right and left. 4 piece set.

$84.60/set
In Stock
Steering column grommet

p/n: 30-0455-36

Grommet, steering column at floorboard.Length: 4.50 inches.

$77.70/ea.
Made to Order Takes 2-3 Days
Power brake pedal pad

p/n: 70-2411-22

Cover, power brake pedal, with "Easamatic power brake" logo. Fully molded with script just like original.

$76.50/ea.
In Stock
Front spring bumper

p/n: 30-0516-32

Bumper, front spring rebound, upper.Height: 2.25 inches.

$74.00/pr.
In Stock
Taillight mounting pad

p/n: 30-0366-15

Pad or Gasket, taillight to body. One (1) pair required per car, sold only in pairs.

$72.30/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$66.40/ea.
Made to Order Takes 1-2 Days
Axle rebound pad

p/n: 30-0534-32

Bumper, rear axle rebound.Length: 3.0 inches. Width: 2.375 inches. Height: 1.6875 inches.

$63.50/pr.
In Stock
Front stabilizer bushing

p/n: 30-0363-33

Bearings or bushings, front stabilizer rod. One (1) pair used per vehicle. Fully molded rubber. One and nine sixteenths inch (1 9/16") length by one and nine sixteenths inch (1 9/16") width by three fourths inch (3/4") inside hole diameter by one and elev

$58.90/pr.
In Stock
Vent division bar weatherstrip

p/n: 30-0540-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$58.90/pr.
In Stock
Gravel shield anti-squeak

p/n: 30-0476-44

Seal, rear shield to bumper.Length: 84.0 inches. Width: .75 inches.

$57.90/ea.
In Stock
Ignition cable grommet

p/n: 70-1598-21

Grommet, ignition cable.Length: 2.125 inches. Width: 1.50 inches.

$51.60/ea.
Made to Order Takes 1-2 Days
Front stabilizer bushing

p/n: 30-0298-33

Bushings, front stabilizer rod end. One (1) pair required per car. Fully molded rubber. One and one half inch (1 1/2") length by one and one eighth inch (1 1/8") width by three fourths inch (3/4") inside hole diameter by one and one half inch (1 1/2") hei

$50.00/pr.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Headlight mounting pad

p/n: 30-0142-14

Gaskets, headlight body mounting to fender. Cut to exact size as original.

$41.80/pr.
In Stock
Firewall grommet

p/n: 30-0456-20

Grommet, heater core at firewall.Length: 3.5625 inches. Width: 2.25 inches.

$40.20/ea.
Made to Order Takes 1-2 Days
Handbrake rod grommet

p/n: 30-0453-24

Grommet, handbrake rod to dash.Height: 1.875 inches.

$39.10/ea.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 70-1628-20

Grommet, wiring harness.

$38.90/ea.
In Stock
Brown gearshift boot

p/n: 30-0069-89

Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.

$32.60/ea.
In Stock
Rear spring pad

p/n: 70-2080-32

Pad, rear spring insulator. Order four (4) per car.Length: 4.75 inches. Width: 2.875 inches.

$29.80/ea.
In Stock
Tail Light Lens Gasket

p/n: 70-3503-15

Tail Light Lens Gasket

$27.40/set
Made to Order Takes 2-3 Days
Gearshift boot

p/n: 30-0069-36

Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.

$26.70/ea.
In Stock
Power brake carpet grommet

p/n: 70-3147-24

Grommet, carpet. Floor front carpet grommet use for power brake hole.

$24.70/ea.
In Stock
Antenna mount pad

p/n: 70-0756-19

Pad, fender mounted antenna.Length: 2.5 inches.

$22.70/ea.
In Stock
Body mounting pad

p/n: 70-1429-48

Pad, body mounting. Fully molded rubber with metal core and rubber locating collar. Also used for radiator cradle to frame. Eight (8) to ten (10) required per car. Two and one fourth inch (2 1/4") outside diameter by one and one sixteenth inch (1 1/16") l

$20.80/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Accelerator hinge grommet

p/n: 30-0539-41

Grommet, accelerator pedal hinge to floorboard.Length: 3.50 inches. Width: 2.50 inches.

$16.50/ea.
In Stock
Hood bumper

p/n: 30-0304-42

Bumper, hood, on side of fender. Six (6) required per car.Length: 1.0 inches. Width: 1.375 inches.

$15.70/ea.
In Stock
Antenna grommet

p/n: 70-1865-19

Grommet, antenna mounting. Fits all models with power antenna. Used with our #70-0756-19.

$14.70/ea.
In Stock
Rear stabilizer bushing

p/n: 70-1967-33

Bushing, rear stabilizer. Four (4) are required per car. Fully molded rubber. One and one half inch (1 1/2") outside diameter by five eighths inch (5/8") inside hole diameter by seven eighths inch (7/8") height.

$14.40/ea.
In Stock
Rear spring pad

p/n: 30-0452-32

Insulator, rear spring leaf clip. Seven and one half (7-1/2) inch long, customer may trim for shorter lengths. May use up to eight (8) per car.

$12.80/ea.
In Stock
Accelerator rod seal

p/n: 30-0537-41

Grommet, accelerator pedal rod through floorboard.

$11.30/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Black door lock knob

p/n: 30-0251-71

Knob, inside door lock control, flexible rubber, black only.Height: 1.125 inches.

$9.90/ea.
In Stock
Dimmer switch grommet

p/n: 30-0538-14

Grommet, headlight dimmer switch through floorboard.

$9.80/ea.
In Stock
Body mounting pad

p/n: 70-1430-48

Pad, body mounting. Fully molded rubber. Also used for radiator cradle to frame. Eight (8) to ten (10) required per car. Two and one eighth inch (2 1/8") outside diameter by three fourths inch (3/4") inside hole diameter by five sixteenths inch (5/16") he

$9.60/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Overdrive linkage grommet

p/n: 70-2031-24

Grommet, overdrive control linkage. Spool type grommet used on manual transmission models with factory overdrive. Three fourths inch (3/4") outside diameter by three eighths inch (3/8") inside hole diameter by three eighths inch (3/8") height.

$6.90/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.60/ft.
In Stock
Cushion Horn BUTTON

p/n: 70-3504-17

Cushion Horn BUTTON

$6.50/ea.
In Stock
Door Weatherstrip

p/n: 70-0491-73

Weatherstrip, door edge. Fine grain sponge. Larger type used on most GM cars this period. Width: 13/16". Height: 11/16".

$6.30/ft.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0356-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Hood bumper

p/n: 33-0542-42

Pad, hood side to fender. Button type, fits five sixteenths (5/16) inch hole, self retaining.

$4.50/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door lock button grommet

p/n: 30-0533-69

Grommet, door lock button.

$1.00/ea.
In Stock