Search Results
Side Window Run Channel Kit
p/n: 20-0564-58
Complete window channel and felt kit. Includes vent window division post channels, glass run channels, and inner and outer windowfelts. Completes both doors.
Front Door Vent Window Set
p/n: 90-0305-90
This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Vent Window Weatherstrips
p/n: 20-0560-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Spring shackle bushing kit
p/n: 20-0550-32
Kit, front spring shackle. Used on both springs. Includes: (4) 21C-5348-A bushings; (2) 21C-5344-A bushings (6) 21C-5465 pins.
Windshield Gasket
p/n: 20-0557-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Front Door weatherstrip
p/n: 20-0559-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Flexible Run Channel
p/n: 20-0510-58
Channel, door glass run. Stainless beaded edge. Includes clips pre-installed. Enough for one door only.
Vent division bar assembly
p/n: 20-0565-56
Assembly, complete division bar. Right-side only. Ready to install. Comes complete with brackets and back of vent window seal.
Vent division bar assembly
p/n: 20-0566-56
Assembly, complete division bar. Left-side only. Ready to install. Comes complete with brackets and back of vent window seal.
Window Felt Weatherstrip
p/n: 80-0630-57
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.
Rear Window Gasket
p/n: 20-0571-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Motor mount
p/n: 20-0515-11
Mount, upper motor. One (1) required per truck. 1953-56: F100-F350 239 & 272 V8 and 1953-56: F100 & F250 215 & 223 6 cylinder.
Radiator mounting pad kit
p/n: 20-0570-45
Kit, radiator support to frame pad. Includes: two (2) center pads, two (2) outer support pads, bolts, nuts, lock washers.
Fabric Hood Lacing
p/n: 20-0354-42
Lacing, hood cowl. Forty nine (49) inches long. Cloth anti-squeak material where hood rests on cowl. Includes tacks.
Vent Window Division Bar Weatherstrip
p/n: 20-0562-56
Front vent window division post seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.
Drag Link repair kit
p/n: 20-0506-32
Kit, drag link end repair. Kit includes: 1-3336, 1-3326, 1-3327, 2-3320, 1-3328. Two (2) kits required per drag link.
Cab To Frame Mounting Pad Set
p/n: 20-0554-45
This ten (10) piece Cab to Frame Mounting Pad set is designed from the original parts for superior fitment and function.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Hood Bumper Set
p/n: 20-0545-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function. This set fits F Series Trucks.
Shift Linkage Repair Set
p/n: 20-2460-26
This column Shift Linkage Repair set is designed from the original parts for superior fitment and function. This repair set replaces worn or missing bushings at the four linkage points in the column shift mechanism.
Axle rebound pad
p/n: 20-0833-32
Bumper, front axle. Fully molded with retaining bolt. Typically order two (2) per truck.
Bed Frame Mounting Pad Set
p/n: 20-0572-48
This eight (8) piece Bed Frame Mounting Pad set is designed from the original parts for superior fitment and function. These mounting pads mount under the bed on all bolt mounting points.
Body mounting pad
p/n: 20-0553-48
Pad, front of cab to frame. Lower. Fully molded rubber with locating collar. One and five eighths inch (1 5/8") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") locating collar inside hole diameter. On
Steering column floorplate
p/n: 20-0549-88
Seal, steering column, brake and clutch arms to floor. Floor shift models.
Steering column floorplate
p/n: 20-0548-88
Seal, steering column, brake and clutch arms to floor. Column shift models. Installs under metal plate.
Gearshift Knob
p/n: 20-0583-24
This black floor shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct screw on replacement for that broken, aged-out original knob.
Gearshift Knob
p/n: 20-0461-24
This black ball column shift lever Gearshift Knob is designed from the original part for a superior fit and finish. This reproduction part is a direct push on replacement for that broken, aged-out original knob.
Radiator splash shield
p/n: 20-0509-45
Seal, lower radiator grille splash pan to radiator. Twenty three and one half (23-1/2) inches long.
