Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

64 items found matching 1961 Buick Invicta 2 door Convertible
Body Weatherstrip Kit

p/n: 90-3183-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$843.89/set
Kit
Convertible Roof Rail Weatherstrip Set

p/n: 70-2403-65

This Convertible Roof Rail Weatherstrip Set fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with metal core.

$484.19/set
Made to Order Takes 5-7 Days
Front Door Vent Window Set

p/n: 90-0426-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$201.49/set
Kit
Front Door Weatherstrip

p/n: 70-0819-72

Door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes four (4) pins and twenty-six (26) sockets for easy installation.

$174.49/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0092-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$156.99/pr.
In Stock
Prop shaft support service

p/n: 50-0510-27

Support, propeller shaft, bearing retainer. Revulcanization service only.

$150.99/ea.
Call or Email
Windshield Gasket

p/n: 70-0858-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$150.39/ea.
In Stock
Transmission mount service

p/n: 50-0314-25

Pad, transmission mounting. Revulcanization service only.Length: 8.0 inches. Width: 2.75 inches.

$135.69/ea.
Call or Email
Hinge Pillar Weatherstrip

p/n: 70-0850-63

Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Includes two (2) pins.

$118.49/pr.
In Stock
Cowl drain gutter

p/n: 70-0780-73

Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.

$90.39/pr.
In Stock
Vent frame deflector

p/n: 70-1792-62

Deflector, beneath vent frame.Length: 5.75 inches. Width: 1.0 inches.

$66.49/pr.
In Stock
Track bar bushing

p/n: 50-0527-34

Bushing, track bar. Molded out of BUNA rubber with correct metal sleeve like original.Height: 1.875 inches.

$65.49/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
U Jamb lock pillar filler

p/n: 60-0571-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$62.79/pr.
In Stock
Run Channel Upper Bumper

p/n: 70-0779-62

This run channel upper bumper is manufactured as original with a brass metal core and molded for a precise, factory fit. The seal is installed at the top of the front door vent window frame on the division post.

$62.69/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Side Window Leading Edge

p/n: 60-0644-80

Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece.

$57.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0849-56

Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$53.49/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Hinge Seal

p/n: 70-1460-70

This hinge seal is installed on the front door hinge pillar at the beltline. These seals are sold as a pair for the left and right side.

$49.49/pr.
In Stock
Lower Control Arm Bumper

p/n: 70-2033-35

Bumper, lower control arm. Attaches to radius rod and lower control arm. Width: 2.5 inches. Height: 1.4375 inches.

$48.19/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$29.49/ea.
In Stock
Door Handle Gasket Set

p/n: 70-0771-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$24.99/set
In Stock
Body mounting pad

p/n: 50-0506-48

Pad, body mounting. Rubber with metal core, locating collar and metal sleeve as original. Metal sleeve is removable, measures one and one eighth inch (1 1/8") long when removed. Part dimensions with metal sleeve inserted are: One and seven eighths inch (1 7/8")

$23.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$18.59/ea.
In Stock
Antenna grommet

p/n: 50-0513-21

Grommet, antenna lead through sheet metal.

$15.49/ea.
In Stock
Body Mount Isolator Pad

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$13.29/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Hood bumper

p/n: 50-0489-42

Bumper, hood to fender ledge. Number required varies. Molded rubber type.Width: 1.5 inches. Height: 1.0 inches.

$12.89/ea.
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Glovebox Link Bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$9.69/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.69/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$8.59/ea.
In Stock
Hood bumper

p/n: 50-0473-42

Bumper, hood to fender. Extruded rubber type.Width: .75 inches. Height: 1.0 inches.

$8.49/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$7.69/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.69/ft.
In Stock
Door Weatherstrip Without Clips

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.29/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.29/ft.
In Stock
1/4" Universal Mounting Pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$7.19/ft.
In Stock
Firewall grommet

p/n: 70-1771-20

Grommet, speedometer cable (also used for trunk lid release cable through rear compartment).

$7.19/ea.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.99/ea.
In Stock
Door Weatherstrip With Out Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$6.79/ft.
In Stock
Door drain hole seal

p/n: 70-1042-70

Weatherstrip, door bottom drain hole.Length: 3.625 inches. Width: .40625 inches.

$6.59/pr.
In Stock