Search Results

60 items found matching 1961 Buick Special DeLuxe 4 door Wagon - 2 seat
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Kit

p/n: 90-0419-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.30/set
$186.50/set
5% discount
Kit
Front Door weatherstrip

p/n: 50-0434-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$159.60/pr.
In Stock
Windshield Gasket

p/n: 50-0291-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$156.70/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0082-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Transmission mount service

p/n: 50-0463-25

Mount, transmission support. One (1) per car. Revulcanization service only.Length: 5.25 inches. Width: 2.25 inches.

$132.30/ea.
Call or Email
Rear Window Gasket Set

p/n: 70-3605-81

This rear window gasket set mounts around the two (2) smaller windows on each side of the back glass on the liftgate. They are molded as left and right with properly shaped corners for a precise, factory fit.

$122.00/pr.
Made to Order Takes 1-3 Days
Steel sash channel

p/n: 50-0552-59

Sash channel, front door window. Formed metal channel, un-plated, made without cam channel.Length: 20.0 inches. Width: .625 inches. Height: .625 inches.

$119.80/pr.
In Stock
Steel sash channel

p/n: 50-0553-59

Sash channel, rear door window. Formed metal channel, un-plated, made without cam channel.Length: 25.5 inches. Width: .625 inches. Height: .625 inches.

$89.90/pr.
In Stock
Liftgate Weatherstrip

p/n: 70-2250-85

This liftgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.

$67.00/ea.
Made to Order Takes 2-3 Days
Coil spring insulator pad

p/n: 70-1772-35

Insulator, coil spring, fully molded.

$64.30/pr.
In Stock
Beltline weatherstrip

p/n: 50-0549-61

Weatherstrip, beltline rear door outer.

$60.20/pr.
In Stock
Beltline Weatherstrip

p/n: 50-0550-60

Weatherstrip, beltline front door inner. Correct material with installed clips.Width: .4375 inches.

$53.60/pr.
Made to Order Takes 2-3 Days
Beltline weatherstrip

p/n: 50-0551-60

Weatherstrip, beltline rear door inner. Correct material with installed clips.Width: .4375 inches.

$53.60/pr.
In Stock
Beltline weatherstrip

p/n: 50-0548-61

Weatherstrip, beltline front door outer. For models with chrome reveal molding on door.

$53.40/pr.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 50-0337-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Glass run channel. Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Helps eliminate rattle, provide a smooth sliding surface and protect glass. Sold as 96" strips.

$44.89/ea.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$15.40/ea.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Door handle gasket kit

p/n: 50-0560-69

Gasket set, door handle. Die cut dense rubber to original dimensions. Four (4) piece set for two (2) doors.

$14.90/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body mounting pad

p/n: 50-0507-48

Pad, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$10.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
License lens gasket

p/n: 50-0357-17

Gasket set, rear license light assembly. One (1) rubber ring and one (1) cork rubber gasket comprise set.

$10.50/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$9.40/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$7.50/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Tailgate bumper

p/n: 70-1827-87

Bumper, tailgate upper and lower. Fully molded with metal core.Width: 1.0625 inches.

$7.30/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Hood bumper

p/n: 70-2020-42

Bumper, hood ledge. Original type retainer and proper factory type profile.Width: .75 inches. Height: 1.25 inches.

$6.30/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
License plate bumper

p/n: 33-0368-30

Bumper, license plate. Fully molded rubber.

$5.90/ea.
In Stock
Firewall grommet

p/n: 70-1771-20

Grommet, speedometer cable (also used for trunk lid release cable through rear compartment).

$5.80/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Filler, sash channel, lower

p/n: 70-2844-57

Filler, sash channel, lower

$5.50/ft.
In Stock
Trunk bumper

p/n: 70-1911-87

Bumper, tailgate and trunk latch striker.Qty Required:2 Width: .875 inches. Height: .625 inches.

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Door Bumper

p/n: 33-1235-71

Bumper, door side. Three eighths (3/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1232-71

Bumper, door side. Seven eighths (7/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1233-71

Bumper, door side. Five eighths (5/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock