Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

30 items found matching 1961 Chevrolet C30 2 door Flatbed
Front Door Vent Window Kit

p/n: 90-0315-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$138.99/set
Kit
Windshield Gasket

p/n: 70-1714-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$118.99/ea.
In Stock
Windshield Gasket

p/n: 70-1715-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$118.99/ea.
Made to Order Takes 2-3 Days
Door weatherstrip kit, front

p/n: 90-0136-72

Front door edge weatherstrip. This part is the primary door to body weatherstrip. Includes the upper seal which glues on the top of the door and the seal which glues on the cab of the truck. Adhesive is not included in the kit.

$117.19/set
In Stock
Motor mount service

p/n: 70-1828-11

Motor mount, front support. Revulcanization service only.

$116.19/ea.
Call or Email
Window Felt Beltline Weatherstrip Kit

p/n: 80-0058-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Four (4) piece kit includes inner and outer felt beltline weatherstrip for each door. These particular moldings have a black bead (inner and outer) and mount on the top outer part of the door to wipe the side windows when the glass is lowered.

$105.59/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrips

p/n: 60-0538-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$96.39/pr.
In Stock
Rear Window Gasket Set

p/n: 60-0182-83

This rear window gasket weatherstrip set contains the rear window gasket itself and the locking strip. Both strips comes in a thirteen foot, one inch (13' 1") piece and mount around the full perimeter of the back glass. The ends may require trimming and bonding for installation.

$88.39/set
In Stock
Axle rebound pad

p/n: 60-0491-32

Bumper, axle to frame, rear.

$73.79/pr.
Made to Order Takes 1-2 Days
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

$63.19/pr.
In Stock
Rear Window Gasket

p/n: 60-0082-83

This rear window gasket weatherstrip set contains the rear window gasket itself and the locking strip. Both strips comes in a ninety inch (90") piece and mount around the full perimeter of the back glass. The ends may require trimming and bonding for installation.

$60.79/set
In Stock
Vent division bar weatherstrip

p/n: 60-0585-56

Front vent window division post seal. Fully molded with metal core with pre-drilled holes.

$49.99/pr.
In Stock
Fuel neck grommet

p/n: 70-1942-41

Grommet, fuel filler neck. Off center flange style. Fully molded rubber. Three and one eighth inch (3 1/8") outside width by three and one fourth inch (3 1/4") outside length by two and one fourth inch (2 1/4") inside diameter by one inch (1") height.

$46.39/ea.
Made to Order Takes 1-2 Days
Transmission mount service

p/n: 60-0465-25

Transmission mount. One (1) per car. Revulcanization service only.Length: 5.75 inches.

$38.49/ea.
Call or Email
Hood to cowl weatherstrip

p/n: 70-1446-43

Weatherstrip, hood to cowl seal. Approximately fifty seven (57) inches of extruded rubber.

$30.89/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$29.89/ea.
In Stock
Pedal pad, clutch & brake

p/n: 60-0467-22

Pedal pads, brake and clutch. Also see our #60-0242-22 and #60-0712-22.Length: 3.6875 inches. Width: 2.75 inches.

$25.99/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$11.79/ea.
In Stock
Inner Fender Seal

p/n: 60-0667-45

Seal, inner fender to frame. Extruded rubber strip replacement. Available by the foot.

$6.89/ft.
In Stock
1/4" Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$6.39/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.79/ea.
In Stock
3/4" Door Bumper

p/n: 33-0293-71

Bumper, front door pillar, upper and lower.

$5.29/ea.
In Stock
Steering column at floor seal

p/n: 70-3768-88

Seal, steering column at floor. Die cut masticated rubber to authentic original dimensions.

$5.29/ea.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$5.19/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$4.69/ft.
In Stock
1/32" Cork Sash Channel Filler

p/n: 70-1114-57

Sash channel filler. Cork. Available by the foot.

$4.39/ft.
In Stock
1/32" Sash Channel Filler Rubber

p/n: 70-2169-57

Sash channel filler. Available by the foot.

$4.39/ft.
In Stock
1" Firewall Grommet

p/n: 32-0263-17

Grommet for license light wire through body.

$4.29/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.89/ea.
In Stock