Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

70 items found matching 1962 Buick Skylark 2 door Hardtop
Body Weatherstrip Kit

p/n: 90-3158-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$489.39/set
Kit
Front Door Vent Window Set

p/n: 90-0419-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$208.49/set
Kit
Front Door Weatherstrip

p/n: 50-0339-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) pins and thirty-four (34) sockets for easy installation.

$202.69/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 50-0342-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes four (4) clips.

$171.49/pr.
In Stock
Windshield Gasket

p/n: 50-0291-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$171.49/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0082-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$164.39/pr.
Made to Order Takes 5-7 Days
Rear Window Gasket

p/n: 50-0424-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$160.79/ea.
In Stock
Transmission mount service

p/n: 50-0463-25

Mount, transmission support. One (1) per car. Revulcanization service only.Length: 5.25 inches. Width: 2.25 inches.

$144.89/ea.
Call or Email
Steel sash channel

p/n: 50-0418-59

Channel, front window lower sash. Formed steel channel only, not chromed. Ready for attaching to your old brackets.

$131.19/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Available in 4ft pairs.

$76.59/pr.
In Stock
U Jamb lock pillar filler

p/n: 50-0453-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$75.89/pr.
In Stock
Coil spring insulator pad

p/n: 70-1772-35

Insulator, coil spring, fully molded.

$71.99/pr.
Made to Order Takes 5-7 Days
Beltline Weatherstrip

p/n: 50-0377-61

Weatherstrip, quarter window beltline outer. Rubber lipped scraper seal type with metal core and tabs as original. For models with chrome molding on door. (Does not have chrome strip on weatherstrip).

$65.99/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Beltline Weatherstrip

p/n: 50-0376-61

Weatherstrip, front door outer beltline. For models with chrome strip on door. (Does not have chrome bead on weatherstrip).

$62.79/pr.
In Stock
Beltline weatherstrip

p/n: 50-0375-60

Weatherstrip, front door inner beltline.

$61.79/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline weatherstrip

p/n: 50-0379-60

Weatherstrip, quarter window beltline inner. Mohair faced with attaching clips as original.

$59.79/pr.
In Stock
Beltline Weatherstrip Channel - 5 Foot

p/n: 70-0651-58

A five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Side Window Leading Edge

p/n: 50-0373-80

Side window vertical leading edge weatherstrip.

$57.19/pr.
In Stock
Run channel upper bumper

p/n: 50-0564-62

Bumper, upper vent window frame, right and left, metal core.Width: 1.0625 inches. Height: .5625 inches.

$55.29/pr.
In Stock
Vent division bar weatherstrip

p/n: 50-0337-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Available in 96" lengths.

$53.59/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0774-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$47.19/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0774-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$36.89/ea.
In Stock
Splash Apron / A-Arm Dust Shield Filler

p/n: 70-3337-45

This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.

$34.59/pr.
In Stock
Radiator bracket cushion

p/n: 70-2014-31

Radiator support bracket, insulator, upper. Two (2) used per car.Length: 6.0 inches.

$28.99/ea.
In Stock
Radiator bracket cushion

p/n: 70-2229-31

Radiator support bracket, insulator, lower. Two (2) used per car.Length: 4.5 inches.

$26.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$18.59/ea.
In Stock
Door Handle Gasket Set

p/n: 50-0560-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This four (4) piece gasket set will do two (2) doors.

$17.99/pr.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$15.49/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$13.29/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
License lens gasket

p/n: 50-0357-17

Gasket set, rear license light assembly. One (1) rubber ring and one (1) cork rubber gasket comprise set.

$12.79/set
In Stock
Plastic guide plate

p/n: 50-0385-58

Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.

$12.19/ea.
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Glovebox Link Bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$9.69/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.69/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$9.59/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$9.29/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$8.59/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$7.89/ea.
In Stock
Hood bumper

p/n: 70-2020-42

Bumper, hood ledge. Original type retainer and proper factory type profile.Width: .75 inches. Height: 1.25 inches.

$7.79/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$7.69/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.69/ft.
In Stock