Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

77 items found matching 1962 Chevrolet Impala 4 door Hardtop
Glass Weatherstrip Kit

p/n: 90-3324-90

Glass Weatherstrip Kit - A ten (10) piece kit that includes the weatherstrip components needed for the glass on your classic restoration project. These parts are designed from originals for superior performance and a factory fit.

$675.69/set
Kit
Body Weatherstrip Kit

p/n: 90-3166-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$597.59/set
Kit
Rear Window Gasket

p/n: 60-0608-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$191.29/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Kit

p/n: 90-0426-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$187.69/set
Kit
Hardtop roof rail weatherstrip

p/n: 60-0646-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$182.89/pr.
In Stock
Front Door weatherstrip

p/n: 70-0825-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) clips for easy installation. Made of top quality rubber.

$172.99/pr.
In Stock
Windshield Gasket

p/n: 27-0055-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$160.89/ea.
Made to Order Takes 2-3 Days
Rear door weatherstrip

p/n: 60-0637-72

Door edge weatherstrip, rear doors with molded ends. This part is the primary door to body weatherstrip. Includes four (4) clips. Made of top quality rubber.

$147.89/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0092-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$147.79/pr.
In Stock
Window felt weatherstrip

p/n: 80-0222-57

Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara

$142.99/set
Allow 1-3 Weeks Ships Separately
Window felt outer weatherstrip

p/n: 80-0223-57

Made from Standard material. Side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like a

$100.29/set
Allow 1-3 Weeks Ships Separately
Cowl drain gutter

p/n: 70-0780-73

Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.

$84.19/pr.
In Stock
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

$63.19/pr.
In Stock
Front Stabilizer Kit

p/n: 60-0217-34

Link kit, full replacement, front stabilizer bar link. Twenty-two (22) piece set completely replaces links at both ends of stabilizer bar. Hex head bolt 5/16"-24nf x 7-3/4" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$62.19/set
In Production
Axle rebound pad

p/n: 60-0668-32

Bumper, rear axle. Made with metal core and 3/8-16 stud molded in.

$59.39/pr.
Made to Order Takes 2-3 Days
Body Bumper Kit

p/n: 90-0215-90

Body Bumper Kit - hood, door and trunk bumpers. Includes sixteen (16) pieces.

$56.69/set
Kit
Beltline Weatherstrip

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in a 3ft pair and 6ft piece.

From $55.89/ea.
View
Lock pillar filler

p/n: 70-0837-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes twelve (12) clips for easy installation. Note:

$54.99/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

$53.79/ea.
In Stock
Run channel upper bumper

p/n: 70-1044-62

Bumper, upper division post w/metal core.Width: 1.75 inches. Height: .50 inches.

$52.59/pr.
In Stock
Gravel Shield

p/n: 60-0524-30

Seal, rear bumper to gravel shield or apron, also called anti-squeak, rear apron to bumper.

$52.29/ea.
In Stock
Side window leading edge

p/n: 70-0832-80

Side window vertical leading edge weatherstrip.

$51.89/pr.
In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

$50.99/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0849-56

Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.59/ea.
InStock
Hinge seal

p/n: 70-1460-70

Seal, front door hinge pillar at beltline. Top quality molded rubber.Length: 1.625 inches. Width: .50 inches.

$44.89/pr.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Steele Rubber Products has the best quality Fenderskirt edge seal for your Street Rod or Custom Build project. Made from top-quality rubber to ensure durability and proper seal.

$43.29/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.59/ea.
In Stock
Transmission mount service

p/n: 60-0465-25

Transmission mount. One (1) per car. Revulcanization service only.Length: 5.75 inches.

$38.49/ea.
Call or Email
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$29.89/ea.
In Stock
Electrical terminal boot

p/n: 30-0279-41

Boot, electrical connection, generator terminal or ignition coil at engine.

$23.89/ea.
In Stock
Door handle gasket kit

p/n: 70-0925-69

Gasket set, outside door handle. Die cut rubber construction. Six (6) piece set for two (2) handles.

$22.79/set
In Stock
Body mounting pad

p/n: 70-1749-48

Pad, body mounting. Fully molded rubber with metal core and locating collar. Two and five eighths inch (2 5/8") outside diameter by one and one eighth inch (1 1/8") locating collar outside diameter by one half inch (1/2") inside hole diameter. One inch (1

$22.69/ea.
In Stock
Fuel neck grommet

p/n: 70-1439-39

Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.

$21.39/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Rear Bumper To Body Dust Shield Filler

p/n: 70-3363-45

This two (2) piece Rear Bumper To Body Dust Shield filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.

$20.39/pr.
In Stock
Splash Apron / A-Arm Dust Shield

p/n: 70-2508-45

This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$18.99/pr.
In Stock
Rear Body Dust & Splash Shield Filler

p/n: 70-3362-45

This two (2) piece Rear Body Dust & Splash Shield filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.

$18.69/pr.
In Stock
Hood bumper

p/n: 60-0696-42

Bumper, hood to fender. Correct cross-section. Four (4) piece set.

$14.99/set
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.99/ea.
In Stock
Lock pillar filler

p/n: 70-0834-79

Front door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes eight (8) clips for easy installation. Note: o

$13.99/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$11.79/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$10.29/ea.
In Stock
Cowl Panel Filler

p/n: 70-3695-43

Cowl Panel Filler

$8.59/pr.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$8.59/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.89/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.69/ea.
In Stock