Search Results
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit
p/n: 90-3183-90
This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.
Body Weatherstrip Kit
p/n: 90-3174-90
This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.
Convertible roof rail kit
p/n: 70-2403-65
Convertible roof rail weatherstrip (in 1962 the type with 6-5/8 inch gap between the center section studs). This part fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with metal core. It also
Convertible roof rail kit
p/n: 60-0612-65
Convertible roof rail weatherstrip (in 1962 the type with 5-3/8 inch gap between the center section studs). This part fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with metal core. It also
Front Door Vent Window Kit
p/n: 90-0426-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door weatherstrip
p/n: 70-0819-72
Door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes four (4) pins and twenty-six (26) sockets for easy installation.
Front Door Vent Window Weatherstrips
p/n: 38-0092-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Windshield Gasket
p/n: 70-0858-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Hinge Pillar Weatherstrip
p/n: 70-0850-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Includes two (2) pins.
Cowl drain gutter
p/n: 70-0780-73
Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.
Taillight gasket
p/n: 25-0078-15
Gasket, taillight housing to body. Note: Two (2) pairs are required for Starfires. All other vehicles need one (1) pair.
Beltline weatherstrip
p/n: 70-0961-60
Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Nine sixteenths (9/16) inch high by nine thirty seconds (9/32) inch thick, two four (4) foot lengths.
Beltline weatherstrip
p/n: 70-0829-61
Weatherstrip, beltline outer on door. Rubber lip type with steel stiffener. Does not include plastic guide plate.
U Jamb lock pillar filler
p/n: 60-0571-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Run channel upper bumper
p/n: 70-0779-62
Bumper, side window on division post. Two (2) per car, with metal core.Length: 1.1875 inches.
Side window leading edge
p/n: 60-0644-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Beltline weatherstrip 3 foot
p/n: 70-1121-61
Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.
Vent division bar weatherstrip
p/n: 70-0849-56
Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Beltline Weatherstrip 6 Foot
p/n: 70-1120-61
Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.
Hinge seal
p/n: 70-1460-70
Seal, front door hinge pillar at beltline. Top quality molded rubber.Length: 1.625 inches. Width: .50 inches.
Taillight lens gasket
p/n: 25-0079-15
Gasket, taillight lens to housing. Shear die cut sponge rubber.Length: 10.0 inches.
Window Sash / Beltline Channel
p/n: 70-0651-58
Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.
Trunk Weatherstrip
p/n: 70-0773-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Radiator mounting pad
p/n: 70-0963-31
Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.
Radiator mounting pad
p/n: 25-0087-31
Insulator, radiator support. Two (2) to four (4) used per car.Length: 6.75 inches.
Fuel neck grommet
p/n: 70-1439-39
Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.
Battery clamp cover
p/n: 70-0095-21
Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.
Rocker panel dust shield cover
p/n: 70-2392-45
Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.
Plastic guide plate
p/n: 50-0384-62
Guide plate, plastic, attaches to various outer scraper weatherstrips.
Hood bumper
p/n: 25-0076-42
Bumper, hood side. Six (6) per car.Length: 1.4375 inches. Width: .875 inches.
Body Mount Isolator
p/n: 50-0507-48
Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.
Masticated rubber sheet
p/n: 70-0645-45
Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples
Plastic guide plate
p/n: 50-0385-58
Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.
Window stop stem bumper
p/n: 33-0540-62
Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1112-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1245-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Brown door lock knob
p/n: 70-0660-70
Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.
Run channel mohair liner
p/n: 70-2863-58
Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.
Brown door lock knob
p/n: 70-0354-70
Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.
Trunk Weatherstrip
p/n: 70-0346-85
This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1244-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Trunk Weatherstrip
p/n: 70-0510-85
This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.
Universal mounting pad
p/n: 70-0308-17
Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.
Body hole plug
p/n: 35-0863-45
Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)
p/n: 70-1111-73
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Sash channel filler 1/16 cork
p/n: 70-1115-57
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on
Quarter window bumper
p/n: 70-1583-62
Bumper, quarter window stop on sash channel.Length: .8125 inches. Width: .75 inches. Height: .50 inches.
Sash Channel Filler 1/16 Rubber
p/n: 70-2170-57
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin
Door or tailgate bumper
p/n: 33-1228-71
Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.
Sash channel filler 1/32 cork
p/n: 70-1114-57
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition
Sash Channel Filler 1/32 Rubber
p/n: 70-2169-57
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.
Door bumper
p/n: 33-1227-71
Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.
Floor pan plug
p/n: 35-0262-20
Plug, floor pan, rear compartment and body. Up to 12 per car, as required.
Hydraulic pump mounting pad
p/n: 70-0946-67
Mounting pad, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) needed per car.Height: 1.0 inches.
