Search Results

79 items found matching 1963 Chevrolet Impala 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3173-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$715.30/set
$643.80/set
10% discount
Kit
Convertible roof rail kit

p/n: 60-0612-65

Convertible roof rail weatherstrip (in 1962 the type with 5-3/8 inch gap between the center section studs). This part fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with metal core. It also

$316.30/set
In Stock
Window felt weatherstrip

p/n: 80-0847-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is

$199.00/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Kit

p/n: 90-0429-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$185.50/set
$176.20/set
5% discount
Kit
Door weatherstrip

p/n: 60-0598-72

Door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes six (6) clips.

$146.30/pr.
In Stock
Window felt weatherstrip

p/n: 80-0232-57

Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appearance, however they are made fr

$146.00/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrips

p/n: 38-0096-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$139.40/pr.
In Stock
Windshield Gasket

p/n: 70-0851-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$132.60/ea.
In Stock
Hinge Pillar Weatherstrip

p/n: 70-0794-63

Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Includes four (4) pins.

$107.80/pr.
In Stock
Window felt outer weatherstrip

p/n: 80-0234-57

Made from Standard material. Side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like a

$106.10/set
Allow 1-3 Weeks Ships Separately
Quarter window filler

p/n: 70-3505-67

Filler, quarter window folding top cover retainer guide with strip. Located on side belt rail. Fully molded with metal core & screws.

$97.00/pr.
In Stock
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

$60.70/pr.
In Stock
Front Stabilizer Kit

p/n: 60-0217-34

Link kit, full replacement, front stabilizer bar link. Twenty-two (22) piece set completely replaces links at both ends of stabilizer bar. Hex head bolt 5/16"-24nf x 7-3/4" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$59.70/set
In Stock
Beltline weatherstrip

p/n: 70-0879-61

Weatherstrip, outer beltline. Made without chrome bead for models with chrome molding on door. Does not include plastic guide plate.

$58.30/pr.
In Stock
Body bumper kit

p/n: 90-0212-90

Kit, hood, door and trunk bumpers. Includes sixteen (16) pieces.

$63.90/set
$57.50/set
10% discount
Kit
Axle rebound pad

p/n: 60-0668-32

Bumper, rear axle. Made with metal core and 3/8-16 stud molded in.

$57.00/pr.
In Stock
U Jamb lock pillar filler

p/n: 60-0571-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$56.20/pr.
In Stock
Beltline weatherstrip

p/n: 50-0488-61

Weatherstrip, quarter window beltline outer.

$55.20/pr.
In Stock
Run channel upper bumper

p/n: 70-1447-62

Bumper, upper division post.Width: .625 inches.

$52.90/pr.
In Stock
Rigid Run Channel

p/n: 70-0752-58

Window run channel, rigid. Single six (6) foot length. Metal backed, rigid, pile lined, and no bead. For front door and rear door division posts.

$50.79/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Side window leading edge

p/n: 60-0644-80

Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece

$49.20/pr.
In Stock
Gravel Shield

p/n: 60-0524-30

Seal, rear bumper to gravel shield or apron, also called anti-squeak, rear apron to bumper.

$48.30/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

$47.10/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0859-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Seal, fenderskirt edge. Proper profile for most skirts of this period, including Fox-Craft. Sixty (60) inch strip.Length: 60. inches. Width: .75 inches.

$40.00/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Transmission mount service

p/n: 60-0465-25

Transmission mount. One (1) per car. Revulcanization service only.Length: 5.75 inches.

$35.60/ea.
Call or Email
Splash apron

p/n: 70-2508-45

Filler, splash apron. A-Arm dust shield two (2) piece set. Die cut masticated rubber. Includes all factory style holes required for installation.

$28.30/pr.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Body mounting pad

p/n: 70-1749-48

Pad, body mounting. Fully molded rubber with metal core and locating collar. Two and five eighths inch (2 5/8") outside diameter by one and one eighth inch (1 1/8") locating collar outside diameter by one half inch (1/2") inside hole diameter. One inch (1

$20.90/ea.
In Stock
Fuel neck grommet

p/n: 70-1439-39

Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.

$19.70/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$18.30/pr.
In Stock
Filler, rear bumper to body

p/n: 70-3365-30

Filler, rear bumper to body

$15.80/pr.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.00/ea.
In Stock
Taillight Housing To Body Seal Kit

p/n: 70-4171-15

This Taillight Housing To Body Seal Kit is a six (6) piece kit of die cut sponge rubber gaskets made to authentic original dimensions. Includes right and left side taillight housing gaskets.

$12.89/set
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door handle gasket kit

p/n: 60-0640-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$10.50/set
In Stock
Hood bumper

p/n: 60-0542-42

Bumper, hood to fender ledge. Four (4) piece set.

$10.50/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$9.40/ea.
In Stock
Taillight Lens Gasket Kit

p/n: 70-4170-15

This Taillight Lens Gasket kit is a six (6) piece kit of die cut sponge rubber gaskets made to authentic original dimensions. Includes right and left side gaskets.

$8.99/set
In Stock
Cowl Panel Filler

p/n: 70-3695-43

Cowl Panel Filler

$7.90/pr.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Inner fender seal

p/n: 60-0660-45

Seal, inner fender. Proper extrusion

$7.00/ft.
In Stock
Tie rod dust cover

p/n: 60-0096-32

Dust seal, tie rod ends. Four (4) required per vehicle.

$6.40/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Door bumper

p/n: 33-0505-71

Bumper, door, used upper and/or lower as required. Excellent detail using highest quality rubber.Length: .875 inches. Width: .8125 inches. Height: 1.

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Quarter window bumper

p/n: 70-1583-62

Bumper, quarter window stop on sash channel.Length: .8125 inches. Width: .75 inches. Height: .50 inches.

$4.50/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Hydraulic pump mounting pad

p/n: 70-0946-67

Mounting pad, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) needed per car.Height: 1.0 inches.

$3.10/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock