This nineteen (19) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration vehicle.
This is a nine (9) piece Convertible Roof Rail Weatherstrip Set. This set fits on the folding roof of the vehicle and seals the side windows when the windows are fully raised. Molded over metal cores like original. The set includes both rear rail water deflectors and the header bow weatherstrip.
Door edge weatherstrip. This part is the primary door to body weatherstrip.
This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This eight (8) piece anti-rattler set includes inner and outer window felt beltline weatherstrips for each side and quarter window.
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
This Spring Shackle Bushing Set is for the front of rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing.. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Seal, convertible top header bow. Included with kit #20-0111-65.
This Spring Shackle Bushing Set is for the rear of rear leaf spring. This set is made with original style rubber bushings. Two (2) sets are required per car.
Seal, rear stone deflector.
Mount, transmission support.Ford Cars 1963-64: 6 cyl. 223 1963: 8 cyl. 260, 289 1964: 8 cyl. 289 with 3 and 4 speed transmission 1964: 8 cyl.
This Front Door At Beltline Weatherstrip pair is designed from the original part for superior fitment and seal. This inner dog leg door seal fits at the door front at beltine inner.
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
This Division Bar Glass Run Channel piece is designed from the original part for superior fitment and function. This rigid run channel fits between the front of the door glass and the back of the vent window. Requires one piece per door, two per vehicle.
Front vent window division post seal. Fully molded with metal core and attaching tabs.
This Convertible Top Rear Rail Water Deflector pair is designed from the original part for superior fitment and seal. For soft folding tops the deflector pair is included in Convertible Roof Rail Weatherstrip sets 20-0027-65 and 20-0139-65.
Channel, lower door glass run. Lock side.
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Pad, brake and clutch pedal. Slip over type. Automatic transmission and manual brakes.
Bumpers, upper door glass division post.
Set, radiator support to frame rubber splash shield. Four (4) piece set.
This Quarter Window Lower Front Corner seal pair is designed from the original part for superior fitment and seal. A fully molded reproduction of the original for convertible and hardtop models.
These Convertible Top Roof Rail Weatherstrip T-Bolt reproductions are designed from the original part for superior fitment and function. This twenty two (22) t-bolts and twenty two (22) nut set fastens to the convertible top bow weatherstrips.
This Fender Skirt Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right edge weatherstrip fits between the rear fender bodywork and the removable fender skirt.
Valves, rear floor pan extension drain.
Pads, taillight rim to housing.
Mount, transmission support.
Bumper, front suspension lower arm.
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.
Seal, radiator air deflector side for right side. Includes special plastic buttons to install.
Bumper, front suspension upper arm. Three eighths (3/8) inch by three fourths (3/4) inch bolt, twenty four (24) threads.
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Bumpers, rear of hood to top of fender. Two (2) required per vehicle.Ford Cars 1961-64 Bumpers, rear of hood to top of fender. Requires 2 pair for hood.
Pad, parking brake pedal. Slip over type.
Gaskets, taillight lens to housing.
Gaskets, taillight housing to body.
This eleven (11) piece Front Stabilizer Bar End Link Kit is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Seal, accelerator pedal linkage to firewall.
Pad, brake and clutch pedal. Slip over type.
Bumpers, side of hood to fender. Four (4) piece set.
Bumpers, door. Five eighths (5/8) inch high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Bumpers, door. Seven sixteenths (7/16) inch high. Fits on door jamb where rear of door closes against body and on rear lower part of door.
Insulator, front coil spring.
This five (5) piece Radiator Mounting Pad Set is designed from the original part for superior fit and support. These shims are installed between the radiator and radiator core support.
Grommet, antenna lead-in. For front mount type.