Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

67 items found matching 1964 Buick LeSabre 4 door Hardtop
Body Weatherstrip Kit

p/n: 90-3165-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$570.89/set
Kit
Front Door Vent Window Set

p/n: 90-0428-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$207.79/set
Kit
Rear Window Gasket

p/n: 60-0527-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$198.49/ea.
In Stock
Hardtop roof rail weatherstrip

p/n: 50-0556-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes four (4) clips.

$196.29/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0095-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$163.59/pr.
Made to Order Takes 5-7 Days
Rear Door Weatherstrips

p/n: 60-0637-72

Door edge weatherstrip, rear doors with molded ends. This part is the primary door to body weatherstrip. Includes four (4) clips.

$156.99/pr.
In Stock
Prop shaft support service

p/n: 50-0510-27

Support, propeller shaft, bearing retainer. Revulcanization service only.

$150.99/ea.
Call or Email
Transmission mount service

p/n: 50-0432-25

Transmission mount. Revulcanization service only.

$148.19/ea.
Call or Email
Windshield Gasket

p/n: 70-0788-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$143.29/ea.
In Stock
Front Door Weatherstrip

p/n: 70-0824-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) clips for easy installation. Made of top quality rubber.

$110.29/pr.
In Stock
Motor mount service

p/n: 70-1766-11

Motor mount. Fits models with 225 v6 and 300 v8 engines. There are two (2) types, this is NOT the interlocking type. Revulcanization service only. Length: 4.25 inches.

$100.99/ea.
Call or Email
Beltline Weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Available in 4ft pairs.

$76.59/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Upper Division Post Bumper

p/n: 70-3554-62

Bumper, upper division post. Rubber with metal cores. Both R & L sides.

$63.19/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Lock Pillar Filler

p/n: 70-0837-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core.

$58.99/pr.
In Stock
Beltline Weatherstrip Channel - 5 Foot

p/n: 70-0651-58

A five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Rigid Run Channel

p/n: 70-0752-58

Sliding glass window unbeaded u-channel secures sliding glass and eliminates rattle. Available in 6ft lengths.

$56.69/ea.
In Stock
Side Window Leading Edge

p/n: 70-1586-80

Side window vertical leading edge weatherstrip.

$55.69/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0880-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$53.49/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Splash Apron / A-Arm Dust Shield Filler

p/n: 70-3161-45

This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.

$50.79/pr.
Ships in 5-7 Days
Lower Control Arm Bumper

p/n: 70-2033-35

Bumper, lower control arm. Attaches to radius rod and lower control arm. Width: 2.5 inches. Height: 1.4375 inches.

$48.19/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.

$54.69/ea.
$30.69/ea.
44% discount
Ships in 5-7 Days
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$29.49/ea.
In Stock
Cornering Light Lens Gaskets

p/n: 70-3236-17

This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the cornering light lens and the cornering light housing or bezel.

$28.79/pr.
In Stock
Body mounting pad

p/n: 50-0506-48

Pad, body mounting. Rubber with metal core, locating collar and metal sleeve as original. Metal sleeve is removable, measures one and one eighth inch (1 1/8") long when removed. Part dimensions with metal sleeve inserted are: One and seven eighths inch (1 7/8")

$23.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Body mounting pad

p/n: 60-0119-48

Pad, body mounting. Rubber original type with metal core, locating collar and metal bolt liner. Two and one eighths inch (2 1/8") outside diameter by three fourths inch (3/4") inside bolt hole diameter by seven eighths inch (7/8") metal bolt outside diame

$21.99/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$21.99/pr.
In Stock
Back Up Light Lens Gaskets

p/n: 70-3231-17

This Back Up Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the back-up light lens and the back-up light housing or light bezel.

$19.69/pr.
In Stock
Parking and Signal Light Lens Gaskets

p/n: 70-3237-16

This Parking and Signal Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking / Signal Light Lens and the Parking / Signal Light Housing or Bezel.

$19.69/pr.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$18.59/ea.
In Stock
Antenna grommet

p/n: 50-0513-21

Grommet, antenna lead through sheet metal.

$15.49/ea.
Made to Order Takes 5-7 Days
Lock pillar filler

p/n: 70-0834-79

Front door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes eight (8) clips for easy installation. Note: o

$15.49/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$13.29/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Door Handle Gasket Set

p/n: 60-0640-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$12.79/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.69/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$7.69/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.69/ft.
In Stock
1/2" License Plate Bumper

p/n: 33-0368-30

Fully molder rubber license plate bumper.

$7.29/ea.
In Stock
Door Weatherstrip Without Clips

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.29/ft.
In Stock