Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

58 items found matching 1964 Cadillac Series CC 0 door Chassis
Prop shaft support service

p/n: 70-0748-27

Bearing support bracket assembly, drive shaft center bearing. Revulcanization service only. .

$178.49/ea.
Call or Email
Splash Apron / A-Arm Dust Shield Set

p/n: 70-2496-45

This ten (10) piece Splash Apron / A-Arm Dust Shield set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$92.19/set
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$83.59/pr.
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$78.39/pr.
In Stock
Headlight & Cornering Light Filler Seal Set

p/n: 70-2788-14

This six (6) piece Headlight & Cornering Light Filler Seal Set is designed from the original part for superior fitment and seal. These pieces fit behind the cornering lights.

$76.49/set
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$70.19/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$68.89/ea.
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$63.69/ea.
Temporarily Unavailable
Front Stabilizer Bar End Link Kit

p/n: 70-2110-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) kit for both sides of one (1) car. Hex head bolt. 5/16"-18nc x 6-15/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$62.69/pr.
In Stock
Body / Cowl to Fender Seals

p/n: 70-2790-43

This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.

$54.49/pr.
In Stock
Wiper Transmission Gasket

p/n: 60-0593-53

Wiper Transmission Gasket - This is the seal for the wiper motor crank. For two (2) speed wiper motors only. These parts are made of the highest quality and authenticity. Replaces # 4906021.

$41.59/ea.
In Stock
Rear Bumper End Filler

p/n: 70-3077-30

This Rear Bumper End Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. These pieces fit behind each bumper end of the vehicle.

$41.29/pr.
In Stock
Hood To Fan Shroud Seal

p/n: 70-2789-43

This Hood To Fan Shroud Seal is designed from the original part for superior fitment and function. Attaches to bottom side of hood. This seal piece is die cut from quality masticated black rubber to authentic original dimensions.

$37.49/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$32.49/ea.
In Stock
Rear spring pad

p/n: 70-0980-32

Pad, rear spring insulator. Two and one half (2-1/2) inches wide, with cloth reinforcement. Used upper and lower on spring. Four (4) used per car.

$29.99/ea.
In Stock
Auxiliary / Frame Dust Shield

p/n: 70-3084-45

This Auxiliary / Frame Dust Shield pair is designed from the original part for superior fitment and function. The two (2) shield pieces are die cut from quality masticated rubber to authentic original dimensions. These shield pieces fit under the vehicle sway bar, near the frame.

$29.79/pr.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$29.69/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$28.49/ea.
In Stock
Taillight Lens Gaskets - In Bumper

p/n: 70-3089-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the outer taillight lens & taillight housing in bumper.

$26.19/pr.
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This black rubber Battery Clamp Cover helps to protect the nearby metal and finish. Good copy from an original part. Length: 3-1/2" inches.

$24.89/ea.
In Stock
AC condenser mount

p/n: 70-0964-31

Mount, air conditioning condenser. Four (4) used per car.Length: 1.0 inches. Width: .75 inches.

$21.79/ea.
In Stock
Cornering Light Lens Gaskets

p/n: 70-3098-17

This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the cornering light lens and the cornering light housing or bezel.

$21.79/pr.
In Stock
Directional & Parking Light Lens Gaskets

p/n: 70-3095-16

This Turn Signal and Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Signal / Parking Light Lens and the Signal / Parking Light Housing or Bezel.

$21.79/pr.
In Stock
Taillight Lens Gaskets - In Fin

p/n: 70-3088-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight lens & taillight housing in fin.

$21.79/pr.
In Stock
Hood bumper

p/n: 70-0770-42

Bumper, fender to hood. Correct detail with ridges as original. Four (4) required per car.Length: 1.3125 inches.

$18.99/ea.
In Stock
License Plate Light Lens Gaskets

p/n: 70-3097-17

This License Plate Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the License Plate Light Lens and the License Plate Light Housing or Bezel.

$18.29/pr.
In Stock
Hood bumper

p/n: 70-0907-42

Bumper, hood front aligning. Correct design with proper screw thread.Height: 2.50 inches.

$15.99/ea.
In Stock
Turn Signal Indicator Lens Gaskets

p/n: 70-3101-17

This Turn Signal Indicator (on fender top) Lens Gasket pair is designed from the original part for superior fitment and seal. As used for lens on fender top "gun sight" turn signal indicators. Made of high quality, ozone resistant materials.

$15.49/pr.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.

$14.59/sqf
In Stock
Body Mount Isolator

p/n: 70-2232-48

Isolator, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$14.39/ea.
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$14.39/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$14.19/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$11.99/ea.
In Stock
Trunk lock emblem gasket

p/n: 70-0875-86

Gasket, trunk lock emblem escutcheon. Steel rule die cut rubber of exact profile.Width: 1.875 inches. Height: 1.9375 inches.

$11.99/ea.
In Stock
$10.99/set
In Stock
Rear spring bushing

p/n: 70-0549-35

Bushing, spring and shackle, rear.

$10.79/ea.
In Stock
Wiper motor gasket

p/n: 70-3610-53

Gasket, wiper motor. 1/4" dense die cut rubber.

$10.79/ea.
In Stock
13/16" Door Weatherstrip with Clips

p/n: 70-1245-73

This Door Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$9.79/ft.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$8.79/ft.
In Stock
13/16" Door Weatherstrip without Clips

p/n: 70-1244-73

This Door Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$7.79/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$7.59/ea.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$6.69/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$5.79/ft.
In Stock
5/32" Filler and Cushion Strip

p/n: 70-1237-48

Filler and cushion strip. Available by the foot.

$5.79/ft.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

This fully molded 1/2” Door Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure. Usually requires two (2) bumpers each per vehicle.

$5.79/ea.
In Stock
Hood Bumper

p/n: 70-1251-42

Bumper, hood to cowl weatherstrip, one fourth (1/4) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$5.79/ea.
In Stock
Hood Bumper

p/n: 70-1252-42

Bumper, hood to cowl weatherstrip, five sixteenths (5/16) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$5.79/ea.
In Stock
1/16" Filler and Cushion Strip

p/n: 70-1236-48

Filler and cushion strip with a variety of applications. Available by the foot.

$5.59/ft.
In Stock
1/32" Cork Sash Channel Filler

p/n: 70-1114-57

Sash channel filler. Cork. Available by the foot.

$5.59/ft.
In Stock