Search Results
Body Weatherstrip Kit
p/n: 90-3403-90
This twenty one (21) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration project. We’ve put everything together in one simple and convenient kit.
Windshield Gasket
p/n: 70-3026-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Roof Rail Weatherstrip - Rear
p/n: 70-3025-68
Roof Rail Weatherstrip for above the Rear doors. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Roof Rail Weatherstrip - Front
p/n: 70-3024-68
Roof Rail Weatherstrip for above the Front doors. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Rear Door Weatherstrip
p/n: 70-3032-72
This Rear Door Weatherstrip is the primary door to body weatherstrip. Complete with molded ends that contain brass cores for strength and extra-long life. Includes accurately installed pins for easy installation.
Front Door Weatherstrip
p/n: 70-3029-72
This Front Door Weatherstrip is the primary door to body weatherstrip. Complete with molded ends that contain brass cores for strength and extra-long life. Includes accurately installed pins for easy installation.
Front Door Edge Weatherstrip
p/n: 70-3030-73
This Front Door Edge seal attaches to the front edge of the front door. Part is fully molded with a corrosion resistant brass metal core.
Door Weatherstrip - Rear Door Striker Seal
p/n: 70-3031-73
This Rear Door Lock Striker Weatherstrip attaches to the front edge of rear suicide door to seal the gap where the front and rear doors meet. The seal has a brass metal core the full length of part.
Heater And AC Gasket Set - 23 Piece
p/n: 70-4468-31
This comprehensive twenty-three (23) piece Heater and Air Conditioning gasket set is designed from the original parts for superior fitment and sealing. Restore the effective heating and cooling operation of your vehicle's cabin air system with this quality manufactured gasket set.
Cowl Drains
p/n: 70-4282-54
This Cowl Drain pair is designed from the original part for superior fitment and function. These quality reproduction drains replace aged, fatigued and damaged originals.
Taillight To Body Gaskets
p/n: 70-4211-15
This Taillight To Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction molded rubber gaskets fit between the taillight housing and the vehicle body.
Splash Apron - Inner Fender Seal Set
p/n: 70-3988-45
This eight (8) piece Splash Apron - Inner Fender Seal Set is designed from the original part for superior fitment and seal. Made from like original fabric reinforced masticated rubber to ensure durability and proper function.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Rear Door Lower Corner Seal
p/n: 70-4208-70
This Rear Door Lower Corner Seal pair is designed from the original part for superior fitment and sealing. This dogleg shaped seal pair attaches at the lower rear corner of the rear door openings approximate to the rear door hinges left and right.
Rear Bumper Stone Shield
p/n: 70-3033-30
This Rear Bumper Stone Shield Deflector mounts behind the rear bumper between body and bumper. This reproduction part is designed from the original part to fit correctly.
1964 Lincoln Factory Shop Manual, CD
p/n: 07-1278-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Accelerator Lever To Accelerator Shaft Seal
p/n: 70-4098-40
This Accelerator Lever To Accelerator Shaft Seal is designed from the original part for superior fitment and seal. This seal mounts directly to cover and protect the accelerator lever to accelerator shaft rod linkage connection.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Brake Pedal Pad
p/n: 70-4286-22
This reproduction Pedal Pad fits over the full perimeter of the brake pedal for a precise, factory fit. Uses original metal trim piece to replace aged and worn original brake pedal pads. Detailed and finished to match the original appearance.
Hood-To-Cowl Weatherstrip
p/n: 70-3023-43
This Hood-To-Cowl Weatherstrip attaches under cowl scuttle molding.
Front Fender To Fender Apron Dust Shields
p/n: 70-4462-44
This Front Fender To Fender Apron Dust Shield pair is designed from the original part for superior fitment and use. Left and Right shield pieces function as front fender apron upper reinforcement to fender seals.
Trunk Weatherstrip
p/n: 20-0095-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear Door Lock Pillar Filler
p/n: 70-3037-70
This Rear Door Lock Pillar Filler attaches to front upper corner of rear door(s) with two (2) screws. This reproduction part is fully molded and has a corrosion resistant brass core.
Heater Core Housing To Firewall Gasket
p/n: 70-4473-31
This Heater Core Housing To Firewall gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket fits to seal the heater core housing to the vehicle firewall.
Hood Bumper
p/n: 70-3022-42
Bumper, hood to fender. Attaches to the hood with single carrot tab on back side. Four (4) per car.
Door Handle Gasket Set
p/n: 70-3036-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. One (1) gasket set will do either front or rear two (2) doors.
Door Bumper
p/n: 70-3035-71
This Door Bumper is designed from the original part and attaches to door with single screw. Typically requires two (2) or four (4) bumpers per vehicle depending on the vehicles year of manufacture.
Air Vent Gasket Set
p/n: 70-4472-31
This Air Vent Gasket set is designed from original parts for superior fitment and sealing. These quality manufactured gaskets fit to seal the two (2) conditioned air assemblies for interior comfort.
Heater Core Gasket Set
p/n: 70-4471-31
This three (3) piece Heater Core Gasket set is designed from original parts for superior fitment and sealing. This quality manufactured set includes the gasket for the perimeter of the heater core and two (2) round insulators.
Taillight Lens Gaskets
p/n: 70-3775-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.
Radiator Side Seals
p/n: 70-3990-31
This Radiator Side Seal pair is designed from the original part for superior fitment and function. Left and Right seals are die cut from quality masticated rubber to authentic original dimensions.
Blower Motor Housing To Firewall Gasket
p/n: 70-4470-31
This Blower Motor Housing To Firewall gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket fits to seal the blower motor housing to the vehicle firewall.
Electrical Panel Cover Gasket
p/n: 70-4474-31
This Electrical Panel Cover gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket is for the electrical panel cover at the Right Hand kick panel.
Taillight Assembly Mounting Pads
p/n: 70-3777-15
This Taillight Assembly Mounting Pad pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight assembly and the vehicle body.
Directional or Back Up Light Lens Gaskets
p/n: 70-3776-16
This Directional Turn Signal or Back Up Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Light Lens and the Light Housing or Bezel.
Rear Door At Hinge Seal
p/n: 70-3297-73
Seal, rear door at rear hinge. Installs with glue to rear door where hinge arm goes into door. 4-piece set.
Rear Bumper Trim Welt
p/n: 70-4092-45
This pair of Quarter Panel to Rear Bumper End Trim Welts are designed from the originals for superior fitment and seal. These welt strips mount to the rear quarter panel bumper end piece, with one per vehicle side.
Heater Core Housing Gasket
p/n: 70-4469-31
This Heater Core Housing gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket fits to seal the heater core to the heater core housing.
