Door Weatherstrips
p/n: 20-2826-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. This part is the primary door to body weatherstrip. Contains four (4) pins.
Door Weatherstrips
p/n: 40-0488-73
This Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right front doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Door Weatherstrips
p/n: 20-1380-72
This front Door Weatherstrip pair is the primary door to body weatherstrip. Contains plastic pins that are attached to the door weatherstrips and molded ends with metal cores.
Door Weatherstrips - Convertible
p/n: 70-3930-72
This Door Weatherstrip is the primary door to body weatherstrip. Designed off original parts, the pair comes with the proper molded ends for a like factory fit.
Door Weatherstrips - Rear Door Striker
p/n: 70-3031-73
This Rear Door Lock Striker Weatherstrip pair attaches to the front edge of rear suicide door to seal the gap where the front and rear doors meet. The weatherstrip has a brass metal core the full length of part.
Electrical Panel Cover Gasket
p/n: 70-4474-31
This Electrical Panel Cover gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket is for the electrical panel cover at the Right Hand kick panel.
Engine light grommet
p/n: 60-0706-17
Grommet, engine compartment light wire in lid. Not a universal grommet, this part is dimensionally just like the original.
Engine Mount - Lower
p/n: 20-1004-11
This left or right Lower Engine Mount is designed from the original part for superior performance and correct fitment. For 221, 260, 289 or 289 Hi-Po V-8 engines.
Engine Mount Service - Revulcanization Only
p/n: 70-1890-11
This Engine Mount - Revulcanization is designed to restore your original engine mounts to a like new condition. Service requires your metal cores. Please call or email for more service details and ordering.
Engine Mount Service - Revulcanization Only
p/n: 70-2008-11
This Revulcanization Service Only is designed to restore your Engine Mount pair to a like new original condition. Service requires your metal cores. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 60-0624-11
This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 70-0548-11
This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 70-1766-11
This Revulcanization Service Only is designed to restore your Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Mount Service – Revulcanization Only
p/n: 60-0615-11
This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Engine Yaw Control Service – Revulcanization Only
p/n: 70-0943-11
This Revulcanization Service Only is designed to restore your Yaw Control Bumper to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Exhaust Tailpipe Hanger Strap
p/n: 60-0308-13
This Exhaust Tailpipe Hanger Strap is made from high-quality rubber for a precise, factory like fit for your classic vehicle. Muffler/tailpipe system, reproduction strap type is manufactured to OEM specifications.
F-100 Brake OR Clutch Pedal Pad
p/n: 70-4484-22
This reproduction F-100 script Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Fastback Fold Down Rear Seat To Floor Stop Bumpers
p/n: 20-2884-88
This Fastback Fold Down Rear Seat To Floor Stop Bumper pair is designed from the original part for superior fitment, finish and function. Includes jamb nuts.
Fender Skirt Edge Weatherstrip
p/n: 40-0476-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Fender Skirt Edge Weatherstrip
p/n: 70-1606-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Fender Skirt Edge Weatherstrips
p/n: 20-0061-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits between the rear quarter panel wheel opening and the fender skirt.
Fender To Hood Side Cushion Bumper
p/n: 70-2610-42
This Fender To Hood Side Cushion Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure. Usually requires four (4) bumpers each per vehicle.
Fender to Radiator Seal
p/n: 20-1454-42
This two (2) piece Fender to Radiator Seal is designed from the original part for superior fitment and seal. Installs between the front fender and the radiator support.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Finish Panel to Package Tray Weatherstrip
p/n: 70-3874-87
This Rear Finish Panel to Package Tray Weatherstrip attaches to the trunk body and seals between the finish panel and the package tray near the convertible top when closed.
Firewall Accessory Wiring Grommet
p/n: 27-0100-20
This Firewall Accessory Wiring Grommet is designed from the original part for superior fitment and function.
Firewall to Hood Weatherstrip
p/n: 20-2749-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body. Includes attaching clips pre-installed.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1457-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This single piece cowl lacing seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl / firewall.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1087-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This single piece cowl lacing seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl / firewall.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-0681-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This Cowl Lacing weatherstrip installs at the rear of the engine bay to seal between the closing hood and the vehicle firewall.
Fixed Quarter Window Weatherstrips
p/n: 70-1652-77
This Fixed Quarter Window Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip mounts around the full perimeter of the quarter glass for a precise, factory fit. For stationary glass windows only.
Fixed Rear Quarter Window Gasket Set
p/n: 70-1728-81
This Fixed Rear Quarter Window Gasket Set contains the left and right seals for two (2) fixed windows on the rear quarter of the vehicle. These weatherstrips have properly molded corners for a precise, factory fit.
Flexible Run Channel
p/n: 60-0129-58
Flexible corrugated steel, cloth covered and mohair lined. Available in 90" lengths.
Flexible Run Channel
p/n: 60-0583-58
Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Available in 96" lengths.
Flexible Run Channel - 5ft.
p/n: 70-1107-57
A cloth covered and mohair-lined type Flexible Run Channel. For sides and top of side windows. Available in 5- foot lengths.
Floor Shift | Carpet Grommet
p/n: 70-3265-88
This Floor Shift / Carpet Grommet is designed from the original part for superior fitment and seal. This part seals the carpet edge to the floor shift boot. For models without floor console.
Folding seat bumper
p/n: 20-2883-88
Bumpers, fastback fold down seat frame side. Four (4) piece set.
Folding seat bumper
p/n: 20-2885-88
Bumpers, fastback fold down rear seat to floor stop. Type with screws.
Folding Windshield Lower Frame Weatherstrip
p/n: 70-4809-52
This Folding Windshield Lower Frame Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits between the folding windshield and its lower frame.
Frame To Fender Seals
p/n: 70-3070-45
This Outer Frame to Fender Seal pair is designed from the original part for superior fitment and function. Frame seals are die cut from quality masticated rubber to authentic original dimensions.
Fresh Air Vent Door Seals
p/n: 70-4166-88
This two (2) piece Fresh Air Vent Door Seal pair is designed from the original part for superior fitment and seal. Seal pieces are manufactured from top quality sponge rubber to original specifications.
Front and Rear Door Weatherstrip Set
p/n: 20-1504-72
This Front and Rear Door Weatherstrip set is designed from the original part for superior fitment and seal. These four (4) pieces of primary door weatherstrips mount (glue-on) directly to the front left and right and rear lift and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Front Bow Weatherstrip
p/n: 70-3659-64
This Front Bow Weatherstrip provides the seal between the convertible top and the top of the windshield. The piece is designed from the original part for superior fitment and seal.
Front Bow Weatherstrip
p/n: 83-1015-64
This Convertible Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This front bow to windshield is fully molded with proper ends.
Front Bow Weatherstrip
p/n: 70-2997-64
This Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This header seal installs directly to the windshield frame to seal between the soft top and the top of the windshield.