Hood to Fender Bumper
p/n: 40-0503-42
Bumper, hood to fender ledge. Correct original cross-section. Up to ten (10) required per car.
Hood to Fender Bumper
p/n: 70-2046-42
This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood To Fender Bumper
p/n: 70-2609-42
This Hood To Fender Bumper is a quality reproduction of the original factory part. Original extruded style cut to proper width.
Hood To Fender Bumper Set
p/n: 20-1313-42
This four (4) piece Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attaches to the front fender to support / cushion the hood closure.
Hood to Fender Bumper Set
p/n: 20-1312-42
This four (4) piece Hood to Fender Bumper Set is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure.
Hood to Radiator Weatherstrip
p/n: 70-2382-43
This Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the hood and radiator support.
Hood to Radiator Weatherstrip - Narrow
p/n: 70-2368-43
This "narrow" Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the hood and radiator support.
Hood to Radiator Weatherstrip - Wide
p/n: 70-2369-43
This "wide" Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the hood and radiator support.
Hydraulic Pump Mounting Pad
p/n: 70-0946-67
This Hydraulic Pump Mounting Pad is designed from the original part for superior fitment and function. For folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) pads needed per car. Height: 1" inch.
Inner Fender Seal
p/n: 60-0667-45
Seal, inner fender to frame. Extruded rubber strip replacement. Available by the foot.
Instrument Panel Grommet
p/n: 70-1654-88
Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.
Large Stationary Quarter Window Weatherstrip
p/n: 70-4165-77
This Stationary Window Weatherstrip is designed from the original part for superior fitment and seal. This window weatherstrip fits between the stationary glass and vehicle body for larger quarter windows.
Leaf Spring Shackle Set
p/n: 20-1064-32
This Leaf Spring Shackle Set is manufactured to OEM specifications to install for an authentic fit and finish. Rear of rear spring shackle bars and bolt assembly with rubber bushings. Two (2) sets required per car.
Lock Cylinder Gasket
p/n: 60-0641-69
This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.
Lower Door and Fuel Tank Door Bumpers
p/n: 20-0004-71
Manufactured to OEM specifications this Lower Door and Fuel Tank Door Bumper pair installs for an authentic fit, finish and function. Five eighths (5/8") inches high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Luggage Rack Pads
p/n: 70-3459-87
This Luggage Rack Pad set is designed from the original part for superior fitment and seal. A five (5) piece set for Station Wagon models with an OEM factory luggage rack.
Masticated Rubber Sheet
p/n: 70-0645-45
This Masticated Rubber Sheet is three-thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.
Metal Sleeved Grommet
p/n: 70-0203-41
Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.
Multi-Purpose Clips
p/n: 70-4802-45
A ten (10) piece set of Multi-Purpose Clips. Commonly used to retain Hood to Cowl Weatherstrips or Inner Fender Splash Panels.
Outer Beltline Weatherstrip
p/n: 70-0862-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Outer Beltline Weatherstrip
p/n: 50-0465-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Outer Beltline Weatherstrip
p/n: 50-0466-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door.
Outer Beltline Weatherstrip
p/n: 50-0497-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Outer Beltline Weatherstrip
p/n: 50-0496-61
This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.
Outer Fender To Inner Fender Gaskets
p/n: 70-4797-45
This Outer Fender To Inner Fender Gasket pair is designed from the original part for superior fitment and seal. Gaskets fit at the top of the left and right front fenders. Gasket pieces are die-cut from quality masticated rubber to authentic original OEM dimensions.
Parking Brake Pedal Pad
p/n: 70-4804-22
This reproduction Parking Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace a worn or damaged original pedal pad.
Parking Light Lens Gaskets
p/n: 20-1023-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Parking Light Lens Gaskets
p/n: 20-0045-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Parking Light to Body Mounting Pads
p/n: 20-2676-16
This Parking Light to Body Mounting Pad pair is designed from the original part for superior fitment, finish and function. This reproduction mounting pad fits between the Parking Light Assembly and body of the vehicle.
PCV valve grommet
p/n: 20-2696-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole on steel valve covers.
PCV valve grommet
p/n: 20-2695-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole with two notches. Fits either aluminum or steel valve covers.
PCV valve grommet
p/n: 20-2697-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in D-shaped hole on steel valve covers.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2858-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2859-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1438-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0774-WT
This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Prop shaft support service
p/n: 50-0510-27
Support, propeller shaft, bearing retainer. Revulcanization service only.
Prop shaft support service
p/n: 70-0748-27
Bearing support bracket assembly, drive shaft center bearing. Revulcanization service only. .
Push-Out Window Frame Gasket
p/n: 70-3797-81
This Push-Out Window Frame Gasket is for the side OR rear push-out windows and has properly molded corners for a precise, factory fit. Up to six (6) used per van.
Push-Out Window Gasket Set
p/n: 90-0152-81
This Push-Out Window Gasket Set is for the side OR rear push-out windows. This set includes the push-out window weatherstrip that is fixed on the body, the window frame inner gasket that goes on the glass, and the window frame outer gasket.
Push-Out Window Weatherstrip
p/n: 70-4183-76
This Push-Out Window Weatherstrip mounts around the full perimeter of the glass and will flex around the window corners. A replacement for the original part offering a precise fit.
Quarter and Side Window Leading Edge
p/n: 20-1510-80
This Quarter and Side Window Vertical Leading Edge pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Quarter Panel Drain Plugs
p/n: 20-2769-45
This Quarter Panel Drain Plug pair is a quality reproduction of the original factory part. These rubber plugs fit inside the quarter panel area to seal-out weather and environmental elements.
Quarter Post Lock Pillar Filler
p/n: 20-1509-79
This Quarter Post Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This part seals the bottom of the rear side quarter window and may also be known as a U Jamb or Quarter Post Seal.
Quarter Post To Door Window Seals
p/n: 20-2839-79
This Quarter Post To Door Window seal pair is designed from the original part for superior fitment and sealing. These seals are located on the quarter post to window.
Quarter Window Door Lock Pillar Fillers
p/n: 70-2047-79
This quarter to side window Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This right and left weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a Door U Jamb Seal.
Quarter Window Pads / Lock Pillar Filler
p/n: 20-1193-79
This Quarter Window Pads / Lock Pillar Filler pair is designed from the original part for superior fitment and seal. This part is located on the pillar above your door latch and works to seal the front lower corner of the rear side window. May also be known as a door u jamb seal.
Quarter Window U Jamb Lock Pillar Filler
p/n: 20-0289-79
This Quarter Window U Jamb Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.. Fully molded authentic rubber construction with metal core.
Quarter Window Vertical Leading Edge
p/n: 20-2844-80
This Quarter Window Vertical Leading Edge pair is the vertical piece of weatherstrip that seals between the door glass and the rear quarter window glass when the quarter window is raised and closed.
Quarter Window Vertical Leading Edge
p/n: 60-0599-80
This quarter and side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. A reproduction manufactured to OEM specifications to install for an authentic fit and finish.
Quarter Window Vertical Leading Edge
p/n: 20-2845-80
This Quarter Window Vertical Leading Edge pair is the vertical piece of weatherstrip that seals between the door glass and the rear quarter window glass when the quarter window is raised and closed.
Quarter window weatherstrip
p/n: 70-2034-77
Weatherstrip, rear door stationary vent window. Fully molded replacement.
Quarter window weatherstrip
p/n: 70-2035-77
Weatherstrip, rear stationary side window. Fully molded with proper joints and cross section.
Quarter Window Weatherstrips - Rear Door
p/n: 70-3629-77
This Rear Door Quarter Window Weatherstrip pair is designed from the original part for superior fitment and seal. This seal mounts around the full perimeter of the rear door quarter glass for a precise, factory fit. For fixed windows only.
Radiator Bracket Cushion
p/n: 70-2070-31
Radiator support bracket, insulator, small type. See our #70-2050-31 for large type.Length: 4.5 inches.
Radiator bracket cushion
p/n: 70-2015-31
Insulator, radiator support cushion, upper or lower. Fully molded with retaining carrots.
Radiator bracket cushion
p/n: 70-2554-31
Cushions, radiator support, upper. Fully molded, specially designed to duplicate original part.
Radiator bracket cushion
p/n: 70-2555-31
Cushions, radiator support, lower. Fully molded, specially designed to duplicate original part.
Radiator Bracket Cushion
p/n: 70-2014-31
Radiator support bracket, insulator, upper. Two (2) used per car.Length: 6.0 inches.
Radiator bracket cushion
p/n: 70-2050-31
Radiator support bracket, insulator, large type. See our #70-2070-31 for small type.
Radiator Lower Filler
p/n: 70-3314-45
This two (2) piece Radiator Lower Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Radiator Mounting Pad
p/n: 70-0963-31
Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.
Radiator Shroud Seal
p/n: 20-0182-31
Seal, radiator side air deflector. One and five eighths (1-5/8) inch by twelve and one half (12-1/2) inch.
Radiator Support to Frame Pad Set
p/n: 20-0772-31
This eighteen (18) piece Radiator Mounting Pad Set is designed from the original parts for a factory like appearance and function. This set fits F100 2-wheel drive models, but will work for F-250 and F-350 models by adding extra metal washers.
Radiator Support To Hood Weatherstrip
p/n: 20-2748-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. This rubber weatherstrip fits at the front of the vehicle to seal between the radiator and the hood when hood is closed. Includes OE type staples to install.
Radiator Top Seal
p/n: 20-0181-31
Seal, top of radiator support to hood air deflector. Fifty (50) inches long. For the following engines: 240, 289, 352, 390, 427, or 428.
Radiator Upper Support Filler
p/n: 70-3313-45
This two (2) piece Radiator Upper Support Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Fits at radiator to radiator upper support.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece strut rod bushing set includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
Rear Bumper Arm Seal
p/n: 20-0234-47
This four (4) piece Rear Bumper Arm Seal set installs between the body and rear bumper. A reproduction designed from original part so it fits correctly.
Rear Bumper End Fillers
p/n: 70-2792-45
This Rear Bumper End Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. These filler pieces fit behind each rear bumper end of the vehicle.
Rear Bumper Fillers
p/n: 70-4911-47
This Rear Bumper Filler pair is designed from the original part for a superior fitment level. These fully molded end pieces fit to the left and right bumper ends between the rear bumper and the vehicle body.
Rear Bumper Stone Deflector Seal
p/n: 20-0232-47
This Rear Bumper Stone Deflector Seal is designed as an exact reproduction of the original bumper to body seal.
Rear Bumper Stone Shield
p/n: 70-3033-30
This Rear Bumper Stone Shield Deflector mounts behind the rear bumper between body and bumper. This reproduction part is designed from the original part to fit correctly.
Rear Bumper To Body Splash Apron
p/n: 20-1466-29
A three (3) piece Rear Bumper To Body Splash Apron set that includes: left, right and special molded center piece.
Rear Bumper To Body Stone Deflector
p/n: 20-1053-29
This Rear Bumper To Body Stone Deflector is designed from the original part for a superior fitment level. This filler piece seals between the rear bumper and the body.
Rear Bumper Trim Welts
p/n: 70-4092-45
This pair of Quarter Panel to Rear Bumper End Trim Welts are designed from the originals for superior fitment and seal. These welt strips mount to the rear quarter panel bumper end piece, with one per vehicle side.