Search Results
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Kit
p/n: 90-0321-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Vent Window Weatherstrips
p/n: 20-2781-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Hardtop roof rail weatherstrip
p/n: 20-2810-68
Hardtop roof rail weatherstrip for fastbacks. Includes fasteners. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Window felt weatherstrip
p/n: 80-0264-57
Original equipment style side window horizontal seal kit (also known as belt line weatherstrip). Four (4) piece kit includes inner and outer felt belt line weatherstrip for each door. These strips wipe the side windows when the glass is lowered. They come
Gearshift boot
p/n: 20-2877-88
Boot, 3-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Gearshift boot
p/n: 20-2878-88
Boot, 4-speed manual transmission lower shifter. Exact reproduction of original. Surrounds shifter housing sealing out dirt, moisture and noise.
Rear Window Gasket
p/n: 20-2848-81
This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Door weatherstrip
p/n: 20-2826-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Contains four (4) pins.
Windshield Gasket
p/n: 20-2777-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Body hole plug kit
p/n: 20-2702-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty two (32) pieces.
Spring shackle bushing kit
p/n: 20-2731-32
Shackle kit, rear spring. Replaces OEM number #C6DZ-5630.
Splash apron
p/n: 20-2762-45
Seal kit, front fender splash shields. Includes attaching staples. Six (6) piece kit.
Quarter Window To Body Seals
p/n: 20-2839-79
This Quarter Window To Body Post seals pair are designed from the original parts for superior fitment and sealing. These seals are located on the quarter post to window.
Trunk Weatherstrip
p/n: 20-2859-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Folding seat bumper
p/n: 20-2884-88
Bumpers, fastback fold down rear seat to floor stop. Includes jamb nuts.
Door To Window Seals
p/n: 20-2835-79
This Door To Window seals pair are designed from the original parts for superior fitment and sealing. These seals are located on the rear edge of the front door to window. Seals may also be known as a door jamb seals.
Hood to radiator weatherstrip
p/n: 20-2748-42
Seal, radiator support to hood. Includes original type attaching staples.
Axle rebound pad
p/n: 20-2729-32
Bumper, outer rear axle. Mounts on frame rail. Push in type. Two (2) required per car.
Folding seat bumper
p/n: 20-2885-88
Bumpers, fastback fold down rear seat to floor stop. Type with screws.
Vent division bar weatherstrip
p/n: 20-2782-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Front Stabilizer Bar End Link Kit
p/n: 20-0037-33
This eleven (11) piece Front Stabilizer Bar End Link Kit is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Hood To Cowl Weatherstrip
p/n: 20-2749-42
This Hood to Cowl weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body. Includes attaching clips pre-installed.
Hood bumper
p/n: 20-2755-42
Bumpers, radiator support hood. Includes jamb nuts. Slip on "Rounded Top" type.
Hood Bumper
p/n: 70-2715-42
Hood Bumper, radiator support hood. Includes jamb nut. Vulcanized "Rounded Top" type. Two (2) required per car.
Upper Control Arm Bumper
p/n: 20-2725-32
This Upper Control Arm Bumper is made with top quality rubber. Includes nut and is for six (6) cylinder models.
Folding seat bumper
p/n: 20-2883-88
Bumpers, fastback fold down seat frame side. Four (4) piece set.
Body hole plug
p/n: 20-2888-88
Plugs, seat access hole plugs. (Included in complete rubber plug kits). Eight (8) piece set.
PCV valve grommet
p/n: 20-2695-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole with two notches. Fits either aluminum or steel valve covers.
Side window bumper
p/n: 20-2783-62
Bumper, door window lower stop. Installs inside door.Qty Required:2 Two (2) required per car.
Firewall grommet
p/n: 20-2721-31
Grommet, air conditioner hoses through firewall. Used with reproduction hoses. Has bigger holes than original.
Firewall grommet
p/n: 20-2720-31
Grommet, air conditioner hoses through firewall. Used with original hoses.
Hood bumper
p/n: 20-2756-42
Bumper, radiator support hood. Includes jamb nut. Slip on "Exposed Screw" type. Two (2) required per car.
PCV valve grommet
p/n: 20-2697-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in D-shaped hole on steel valve covers.
Gearshift seal
p/n: 20-2875-88
Seal, automatic transmission shifter housing to floor. Installs between housing and floor pan.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
PCV valve grommet
p/n: 20-2696-20
Grommet, valve cover (Positive crankcase ventilation valve). Used in round hole on steel valve covers.
Glovebox link bumper
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Bumper support bar pad
p/n: 20-2765-45
Pads, front bumper bracket to fender. Two (2) required per car.
Glove box and license plate bumper
p/n: 20-2889-45
Bumpers, glovebox and/or license plate. Used as glove box door bumpers for 65-66 and 71-73 models, used as license plate bumper for 65-70 models.
Hood bumper
p/n: 20-2753-42
Bumper, hood on fender.1965-66: Mustang (4 required). 1967-68: Mustang (2 required).
