Search Results

54 items found matching 1966 Buick Wildcat 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3199-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$519.40/set
$467.50/set
10% discount
Kit
Motor mount service

p/n: 70-1891-11

Motor mount. Revulcanization service only.Length: 4.125 inches.

$210.90/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0425-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$213.50/set
$202.80/set
5% discount
Kit
Front Door weatherstrip

p/n: 70-0894-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes eight (8) pins. Made of top quality rubber.

$162.00/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0091-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$157.00/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0666-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$146.30/pr.
In Stock
Power window conduit

p/n: 70-1538-70

Conduit for power window wiring from front door to body through hinge pillar.

$139.70/set
In Stock
Transmission mount service

p/n: 50-0432-25

Transmission mount. Revulcanization service only.

$135.30/ea.
Call or Email
Side window leading edge

p/n: 50-0487-80

Side window vertical leading edge weatherstrip.

$73.50/pr.
In Stock
Vent Window Division Post Run Channel

p/n: 70-0985-58

The front door side window glass run channel on the backside of the vent window division post. Flock lined with a molded-in upper bumper.

$63.40/pr.
In Stock
Beltline weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Nine sixteenths (9/16) inch high by nine thirty seconds (9/32) inch thick, two four (4) foot lengths.

$58.90/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0843-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$56.50/pr.
In Stock
U Jamb lock pillar filler

p/n: 70-0844-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$55.80/pr.
In Stock
Side Window Felt Beltline Weatherstrip

p/n: 70-0869-61

Door Side Window Felt Beltline Weatherstrip - Outer window felts only.

$54.50/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

$47.10/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Hood to cowl weatherstrip

p/n: 70-3420-42

Weatherstrip, hood to cowl.

$42.30/ea.
In Stock
Radiator bracket cushion

p/n: 70-2050-31

Radiator support bracket, insulator, large type. See our #70-2070-31 for small type.

$41.70/pr.
In Stock
Radiator bracket cushion

p/n: 70-2070-31

Radiator support bracket, insulator, small type. See our #70-2050-31 for large type.Length: 4.5 inches.

$41.40/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Taillight mounting pad

p/n: 50-0491-15

Pad, taillight mounting.Width: 16.0 inches. Height: 9.0 inches.

$39.00/pr.
Made to Order Takes 2-3 Days
Taillight lens gasket

p/n: 50-0492-15

Gasket, taillight lens.Width: 14.5 inches. Height: 7.5 inches.

$37.90/pr.
In Stock
Backup lens gasket

p/n: 50-0493-15

Gasket, back-up lens.Width: 3.375 inches. Height: 2.5 inches.

$21.30/pr.
Made to Order Takes 2-3 Days
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Front Fender Cornering Light Lens and Bulb Gasket

p/n: 70-4050-16

Front Fender Cornering Light Lens and Bulb Gasket - Die cut sponge rubber made to authentic original dimensions. Right and Left hand pair.

$18.50/set
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$18.30/pr.
In Stock
Front Signal Light Lens Gasket

p/n: 70-4047-16

Front Signal Light Lens Gasket - Die cut sponge rubber made to authentic original dimensions. Right and Left hand pair.

$16.50/pr.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$15.40/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door handle gasket kit

p/n: 60-0640-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$10.50/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$9.40/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$7.50/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Hood Bumper

p/n: 70-1963-42

Bumper, hood to fender. Measures 11/16" by 7/8"

$5.90/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Door drain hole seal

p/n: 70-0938-70

Seal, door bottom drain hole.Length: 3.5 inches.

$5.80/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock