Search Results
Please click on the part name in red in order to get a complete description.
Front Door Vent Window Weatherstrips
p/n: 20-1110-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and contain metal cores with attaching tabs that run vertically on the division post.
Rear Door Weatherstrip
p/n: 70-3823-72
Rear door edge weatherstrip. This part is the primary door to body weatherstrip.
Tailgate Weatherstrip
p/n: 70-3544-85
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the tailgate opening, directly to the body, with properly spaced plastic clips. Includes molded ends that contain brass cores.
Front Door Weatherstrip
p/n: 70-3822-72
Front door edge weatherstrip. This part is the primary door to body weatherstrip.
Leaf Spring Shackle Bushing Kit
p/n: 20-1066-32
Leaf Spring Shackle Bushing Kit - For rear of rear leaf spring. Complete with shackle bars and bolt assembly with rubber bushings. Two (2) kits required per car.
Front Coil Spring Saddle Insulator Kit
p/n: 70-3963-35
Front Coil Spring Saddle Insulator Kit - Two front coil spring bushings and two spring insulators to restore the performance of your classic vehicle. Requires two (2) per car.
Motor mount
p/n: 20-1000-11
Front motor mount support. Right-hand side only. Fairlane big block engines. See description for fitment.
Motor mount
p/n: 20-1001-11
Front motor mount support. Left-hand side only. Fairlane big block engines. See description for fitment.
Front Fender Dust Shield Filler
p/n: 70-3071-45
This six (6) piece Front Fender Dust Shield / Splash Apron set is designed from the original part(s) for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Cowl to fender seal
p/n: 20-1100-45
Seals, rear of front fender to cowl side panel lower extension. Staples included.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Rear Leaf Spring Bushing
p/n: 70-3964-35
Rear Leaf Spring Bushing - Original style leaf spring bushings used in front eyes of rear leaf springs. Requires two (2) spring bushings per vehicle.
Accelerator Pedal Pad
p/n: 20-1075-40
Pedal, accelerator. Includes chrome trim. Trucks (F100-350) before Serial # P60,001.
Brake pedal pad
p/n: 20-1043-22
Pad, brake pedal. Models with manual transmission and manual brakes.
Brake pedal pad
p/n: 20-1044-22
Pad, brake pedal. Models with automatic transmission and manual brakes.
Hood to radiator weatherstrip
p/n: 20-1083-42
Seal, top of radiator to hood. Holes pre-punched and special fasteners included.
Rear Leaf Spring Insulator Pad
p/n: 20-2733-32
Rear Leaf Spring Insulator Pad - An exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Standard bumper
p/n: 20-0907-71
Bumpers, dual useage. Used on the rear of the hood for 1966-67: Fairlane & Ranchero. Used as a liftgate bumper for 1966-77: U-Series Bronco. Use on the door for 1967-72: F100-750 Series trucks.
Stabilizer bar assembly kit
p/n: 20-1068-33
Repair kit, stabilizer bar end. Eleven (11) piece set. Two (2) kits required per car. Hex head bolt. 3/8"-16nc x 6-7/8" lg. Comes with metal sleeve, four (4) cup washers and four (4) rubber grommets.
Front suspension bumper
p/n: 20-1062-32
Bumper, front suspension. Bumper section is 1-5/8" tall, 2" long, and 1-3/8 wide.
Steering Column - Floor Seal
p/n: 20-1071-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Hood Bumper
p/n: 70-2715-42
Hood Bumper, radiator support hood. Includes jamb nut. Vulcanized "Rounded Top" type. Two (2) required per car.
Fuel filler cover bumper
p/n: 20-0006-41
Bumpers, fuel tank door. Single stem and double retainer bumper set.
Glovebox and fuel door bumper
p/n: 20-1220-88
Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Glovebox link bumper
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Brake adjustment hole plug
p/n: 70-1092-24
Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.