Search Results

57 items found matching 1967 Chevrolet Impala 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3250-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$505.40/set
$454.90/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0425-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$213.50/set
$202.80/set
5% discount
Kit
Front Door weatherstrip

p/n: 70-1764-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$178.80/pr.
In Stock
Window Felt Beltline Weatherstrip

p/n: 80-0249-57

Side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is lowered.

$178.70/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrips

p/n: 38-0091-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$157.00/pr.
In Stock
Power window conduit

p/n: 70-1538-70

Conduit for power window wiring from front door to body through hinge pillar.

$139.70/set
In Stock
Window Felt Beltline Outer Weatherstrip

p/n: 80-1021-57

Weatherstrip, beltline outers. Made from original material. These strips wipe the side windows when the glass is lowered.

$120.00/set
Allow 1-3 Weeks Ships Separately
Axle rebound pad

p/n: 70-2071-32

Bumper, rear axle impact. Fully molded with new metal core.Width: 4.625 inches. Height: 1.875 inches.

$107.30/pr.
In Stock
Window Felt Beltline Outer Weatherstrip

p/n: 80-0250-57

Made from Standard material. Side window outer horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.

$100.20/set
Allow 1-3 Weeks Ships Separately
Hardtop roof rail weatherstrip

p/n: 82-0040-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$90.60/pr.
In Stock
Side window leading edge

p/n: 60-0665-80

Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece

$74.70/pr.
In Stock
U Jamb lock pillar filler

p/n: 70-0983-79

Door lock pillar seal. Shorter type, one and three eighths (1-3/8").

$73.50/pr.
In Stock
Motor Mount

p/n: 60-0462-11

Front motor mount. Six (6) cylinder models only.

$71.60/ea.
In Stock
Vent Window Division Post Run Channel

p/n: 70-0985-58

The front door side window glass run channel on the backside of the vent window division post. Flock lined with a molded-in upper bumper.

$63.40/pr.
In Stock
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

$60.70/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0843-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$56.50/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0749-60

Window Felt Inner - One (1) pair of three (3) foot lengths. Rigid, flocked rubber lip, with flat stainless bead. For front door, rear door and quarter windows.

$50.90/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Hood to cowl weatherstrip

p/n: 82-0039-42

Weatherstrip, hood to cowl. Proper cross section rubber extrusion.

$48.30/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

$47.10/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Body Bumper Kit

p/n: 90-0211-90

Kit, hood, door and trunk bumpers. Includes eighteen (18) pieces.

$45.60/set
$41.00/set
10% discount
Kit
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Splash Apron Filler Shield

p/n: 70-2510-45

Splash Apron Filler Shield - A-Arm dust shields, this is a (4) pieces total set. Die-cut masticated rubber. Includes all factory style holes required for installation and includes staple hardware.

$28.30/pr.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Cowl grill seal

p/n: 70-1520-54

Seal, cowl grill to firewall. Die cut dense sponge rubber. Replaces #3860119.

$16.90/pr.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.00/ea.
In Stock
Steering Column Seal

p/n: 70-3693-36

Steering Column Seal at Floorboard.

$12.80/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door handle gasket kit

p/n: 60-0640-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$10.50/set
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
License Plate Light Lens Gasket

p/n: 70-3497-17

This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. Die cut to original specifications.

$6.60/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Door bumper

p/n: 33-0981-71

Bumper, door upper. Molded with carrot retainers like original.Length: 1.0625 inches. Width: .625 inches. Height: .8125 inches.

$4.20/ea.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock